← Course overviewFree lesson 1 of 3 · lesson 1 of 55Next lesson →

Unlock all 55 lessons of Design Concepts of Power Electronic Converters for IndustriesFull course ₹40,000 · paid

Price & syllabus
Free lesson · 32 min · no payment

Power Electronics Basics: Converter Types and Course Overview

A free lesson from Skill-Lync's Design Concepts of Power Electronic Converters for Industries course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Design Concepts of Power Electronic Converters for Industries lesson?

Introduces the course audience and goals, then explains the role of a power converter between a source and a load with a controller. Surveys the four conversion types: DC-DC, AC-DC with active rectifiers, DC-AC inverters and AC-AC.

  • Who the course is for and the week 1 objectives
  • Source, converter, load and controller block diagram
  • DC-DC and active AC-DC rectifier conversion
  • DC-AC inverters and AC-AC frequency conversion

What comes after lesson 1?

The next free lesson is lesson 2, “Converter Control and Applications: Boost Converters, EVs, Solar and Chargers” (19 min). Later in Skill-Lync's Design Concepts of Power Electronic Converters for Industries course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 55 lessons (24 h 51 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hi, everyone. Welcome to the course on Design Concepts of Power Electronic Converters for Industries. We are focusing upon week one here. So that's basically power electronics. We'll go through power converters and their applications. So just to set some stage and foundation here on what this course is about and applications of power converters. And then in upcoming weeks, we will dive into each of individual converters and their modeling and simulation approaches. So let's go through a little bit about the course here. This course is going to be beneficial for any fresher undergraduate or graduate students who just graduated or probably with someone with about less than five years of experience in industry, especially working on power electronics or similar electrical engineering domain.

Anyone who's also looking to switch their careers into domain of electric vehicles and renewable energy, power systems, and some other industrial applications, it is also going to be beneficial for them to learn about power electronics as it's being used in wide variety of domains for low voltage and high voltage applications now. So, and there's a lot of demand, I think, probably than ever in the history to work on power electronics and implement them with the evolution of electric vehicles and chargers and renewable energy. So, yeah, I will go through basics of power electronics, different switching methods, and dive into the modeling of power converters using different tools, and also look into understanding different components of power converter and how do you design them, actually, right?

So, you might have gone through some courses on power electronics in your bachelor's or master's degree, but may not have actually designed a power converter. So, I'll be talking through the actual industry experience here and then how you design one, what are the different criterias that you look into making those design decisions as part of the course, and also give you certain tips on what to select and which components and why, what are some trade-offs based upon cost, and also keeping in mind some of the future vision approach as well.

Next, on the course here, students will be able to understand the basics of power electronics. When I say power electronics here, it's referring to semiconductor physics where we will look into devices, MOSFETs, and IGBTs, and how they operate, which one to select, and how to select. That's very crucial. It's like the heart of the power electronics to select a proper switch that can work, and with proper energy efficiency and performance that's required. And then look into some of the electrical components. Those are required for the power converters like capacitors and inductors, high power ones, and also sizing different bus bars and other things.

We'll look into some magnetic concepts for, again, inductors and gate drive transformers and such different magnetic concepts, both, again, low power and high power ones. And also focus on mechanical as well. The course is going to look into different heat sinks and cooling systems, and also how to design your bus bars and other things, and then also the inverter to package it better. So we'll go through and I'll provide some, again, tips on how to work with them, and then how to integrate everything to make a better power electronic converter.

We'll go through a lot of simulations which are related to actual applications. So these will be tied to some applications where we will go through the power demands, and then how to select different components, how to simulate one, how to size your capacitors, DC link, switches. So we'll be simulating an actual converter which can be built. So we'll go through basics first, though. So I'm not going to dive directly into complex stuff. So you get some background there, and then we will dive into the complex stuff later on in coming weeks.

We'll go through the design and modeling of power converters using MATLAB and also PSIM. So these two are widely used in industry in any automotive or power systems applications. MATLAB is preferred for control level of simulations, and also for some power electronic block in the Simscape power systems. So those are really helpful to simulate it, and there are so many standard library blocks that's available within MATLAB, which you can use so you don't have to really build everything on your own. Also, PSIM is comparatively better for a circuit sort of simulation where you're looking to simulate the power converter with non-ideal characteristics and also to tie it to maybe a load or an electric machine so you can put those and the properties.

So the difference here is that the PSIM would be preferred by someone who is more focused on circuit, and MATLAB would be by someone who is more focused upon controls, and you can build a code from MATLAB as well. Certainly with PSIM also you can build. MATLAB is more preferred because you can do some real-time environmental testing using some hardware in-loop and modern in-loop sort of testing. So we'll also go through the course structures in here and also implementing technologies that you learned through your BE or BSc.

They are going to be similar complexity as to MS or PhD when you look on an abroad education in U.S. or Canada or certain countries. So that would be the level of complexity of this course. I'll also provide certain tips and expectations from professors in U.S. and Canada on how to prepare for it. So having been through education in U.S., I understand some of the challenges and one of the expectations from top-class universities like MIT and Purdue and University of Illinois, Chicago, and all other different universities.

So there are different expectations from professors and how you build through it. So we'll go through that so you can develop your own models and be able to work well during your study abroad as well. In the tools and power electronic lessons, we'll go through understanding processes that are used in the industry, typical power converters and engineers, what they design. So for a power electronic converter, typically the role is divided into maybe three different categories or maybe another one here, fourth. One is a power electronics engineer.

So this person here would be either a hardware engineer or software engineer. The hardware engineer's role is to figure out how to design the power electronics boards, that is the power board where you would have your power switches and also designing different gate driver circuits and interfaces and how to turn the switches on. And you'd be building your communication through some sort of control board, so using a micro. So that would be the scope of hardware engineer to spec each of these components out and select.

While the software or embedded engineer would also look into developing these and then tying all the hardware software interfaces and how to build the software, which can process different signals and feedbacks generated from the power electronics system and then work with your controls to be able to achieve a desired power or voltage or current demand. While a power electronics mechanical engineer's focus is upon how to integrate and package everything. So certainly the power electronics domain is very wide. It does not end with electrical. So here electrical engineering and mechanical, they have to work together to be able to package everything in an order where you can meet the cost.

You can also design a product which is performance comparable and you can compare it with any other competitors' products also in terms of size and power density mainly. And that's where the systems engineer typically comes into role who would be sort of either a chief engineer or a leader for the project who's looking to combine all the different pieces together from manufacturing and technical and suppliers. So you can design a product which can meet all the different requirements and also being realistic on the price and size.

This would be again just kind of overview for anyone who's looking into do the course. So you would grow your career into these sort of roles as power electronics, hardware, software engineers, controls engineers, mechanical engineers, and system engineers. There are certain prerequisites for the course that I have put in here. So basics of circuit theory. Hopefully you are familiar with KCL, KBL, Thevenin, and all of the basic electronic and electrical circuit theories. You have understanding of different voltage current, what is a PWM, how does a transistor work, whether it's a BJT or MOSFET or all different top amps, and how does it work.

We'll go through some basics of electronics design, but the expectation is that you know how different electronic circuits work and how to design some of the basic operator logics and how to design smaller voltage divider circuits and such sort. And the MATLAB and Simulink are extensively used in the course. In coming weeks. So expectation is that you also know how to work with MATLAB to create scripts, how to post process the files from MATLAB by within the workspace and also to use Simulink and mainly Simscape power systems blocks to be able to design your power electronic converter and we'll go through and study those power electronic converters.

So even though I will be walking you through with Simscape power systems blocks and I'm showing you what's available, I will not be going through and then teaching you how to use MATLAB and Simulink in the course here. So the expectation is that you know it. Understanding of passive components like inductors, capacitors, resistors, and these are widely used again in any sort of electrical application. So yeah, expectation here is that you also know about them and anyone who has been through a bachelor's or a master's, I believe that you would know what these components are and how does it work, how to size and spec one.

So we would also go through sizing some filters and then passive LC and then low pass filters where the inductors and capacitor sizing will be used for your power converter design. So while I'll show you some calculations on how to select and then how to do those. As far as the week one is concerned here, we'll look into introduction to power electronics and how power electronics really comes into play and then how is it being used in the industry. So applications of power electronics. We'll go through a couple of examples here like computer power supply, electric vehicle, and then EPV systems.

And another interesting one is an earth orbiting spacecraft where we're using power electronics there to power certain systems. We'll go through the schematics and understand how it's being used. We'll also then focus upon power electronics design and see what are the basic building blocks of the power electronics design. So that's kind of the key to understand what's being used in power electronics, which different blocks make up the overall system and how they are linked together to provide your particular output. We'll also go through evaluation of DC-DC converter in this particular week and also focus upon steady state analysis.

When you're working through an electrical circuit, you might have studied this into some of your circuit theory classes that there are steady state and transient dynamics associated with a particular circuit. And here we'll go through some of the steady state concepts and then how you can approximate and design your equation such that you'll be able to use them in sizing your components for power converters. And also to create different average value models and those things in MATLAB. We'll go through understanding and see how CCM and DCM mode are different in an operation of a converter.

So continuous conduction mode and discontinuous conduction mode. And focus a little bit about the DCM mode here. So again, the week one is not focusing upon DC-DC converters a lot because that's part of another course on power electronics that's available on skilling. So you can go through it and understand the different converters here. Well, I'll be introducing some of those concepts a little bit. So we will get into the course and then focus upon the aspects which are not covered as part of that course. Okay.

At the end, we'll have also a challenge that you will be given and you'll be supposed to work with the particular challenge and then give out your assessment on that particular challenge. So the objectives for the week one here. Right. So I'm looking to provide basically understanding here what is power electronics and then how it's used, what are different applications and which converters are commonly used. Once we go through a basic list of power electronics converters, there are a lot more converters for a different power conversion and we'll see which ones are commonly used.

So you don't have to confuse and probably focus upon a lot of different things at the same time. Maybe take your time and build your basics and also simulations. So you are focusing upon the converters which are commonly used in the industries and there are some niche topologies which are available, which are used for some specific applications. So we may not really dive into some of those as well. The goal here is to give a broad understanding of different converters. And in the following weeks, we will go into some complex topologies and simulating those and observing the differences.

Okay. So, yeah, let's dive into the introduction to power electronics and see what we got in there. So on the image on the right, you can see here the power electronics interface block, which is mainly looking into a power electronic converter and how it's basically built up. So you can see here there is a source and then a load and a converter fits right between the source and load along with a controller. So the role of converter over here is basically managing the flow of voltage, current or power or frequency between the source and load.

So we are trying to either convert power from one form to another form. Let's assume that we are trying to work on an application where a DC energy needs to be converted into AC. And that's where a power electronic converter called inverter comes into the picture where we are converting that DC energy into AC using the inverter. And then there's a controller inbuilt within the power electronics to be able to operate the converter for a certain voltage or current feedbacks and to be able to drive the switches inside the converter.

So these two are closely linked again. The modern applications, they use a microcontroller or some sort of FPGA or DSPs for the controller where it's doing all the processing and the PWM signals are generated. And then that's fed back into the converter, which converts the energy. There are other types of converters, which we will dive in, but the mainly here, the main application of power electronics comes here because we are able to achieve higher efficiencies about 97 to 98%, which is not possible typically with the mechanical systems because there's a lot of efficiency loss in terms of friction.

And in the conversion losses that's happening, so maybe taking an example of an IC engine, suppose, so regular vehicles on the road, you'll see either trucks or passenger cars, they typically run on IC engines, whether they are petrol or diesel engines. They rely upon the fuel and to be able to convert the power to a mechanical energy that can drive the wheels. But as you would know, the engines, they operate upon different cycles, diesel cycles or different cycles to be able to generate a certain power curve.

And the fuel economy is also limited where the efficiency within the engine is probably around 50, 55%. So there's a lot of power loss that happens within the sort of mechanical system to generate. When we consider an electric vehicle, when we consider an electric vehicle sort of example, we are converting the energy to drive a motor, which drives the wheels. And power electronic converter has an efficiency of about 97, 98%, while the motor has an efficiency of about 95%. So you can see the combined efficiency is greater than 90%.

So that's what really drives the power electronics applications and then also the futures where you would see that almost every manufacturer is now ramping up their research and also the application and upgrading of their passenger cars and vehicles and trucks for the power electronic applications. The bi-directional flow of power is possible with the power converters. So again, considering an example of electric vehicle where we are generating the power from a DC source, let's consider that's a battery. So generating power from a battery to drive a motor, which is essentially driving the vehicle.

And it's also possible to store the energy back into the battery whenever there is a region operation where the vehicle is driving the downhill or maybe there is a brake that's applied by the driver. So there's a lot of energy that's generated in the wheels, which can be fed back through the motor into the battery. So that's another advantage that there is a bi-directional flow that's possible with these power converters. The goal of the power electronic system, as we touched based earlier, is to achieve maximum efficiency.

There is also a maximum reliability that can be achieved within the electronic components because they can work for 10-15 years without any sort of issues if designed correctly. The cost can also be played around where you can get a similar system which converts the energy compared to any sort of hydraulic or mechanical or pneumatic systems to a power electronic with a minimum cost. The packaging dimensions and weight are also reduced. So that's another major one. To get a 400 horsepower engine, you probably would see that the engine might weigh more than 100 kgs.

And its dimensions are pretty huge. It could be a three-foot... A four-foot sort of engine. When we are looking into a similar power converter, it might weigh around 50 kgs, get the same power, and the dimensions might be probably around half a foot to probably, again, half or three-fourths of a foot. So there's about 70%, 80% size reduction that can happen by moving to power electronic, and also the weight is reduced. So there are obviously a lot of advantages with the power converters getting into the play, and that's why everyone is increasingly adopting these for the future.

The introduction here, continuing, we'll look through here some of the building blocks of power electronics. So let's consider an HEV, hybrid electric vehicle here, where we are basically having an electric motor and also an IC engine, which is driving the wheels. So the transmission takes care of how these two are coupled and how the power flow is divided, and what sort of torque and speed are applied onto the wheel to drive it. The main role here comes of the power electronics, which is drawing an energy from a DC source.

It could be a battery, your fuel cell, or even supercapacitors in certain cases. They can source a lot of energy to drive the power electronics, which drives the motor, and that supports the engine in achieving the proper fuel economy. In certain cases where high acceleration is expected, one could engage the electric motor, and it can provide a lot of acceleration within very short time, where IC engine response might be slow. So that's how you can achieve performance, and also during sort of steady state operations, you can use electric motor.

When it's going down the hill, the motor is basically freewheeling, and it can provide the power back to charge this DC source. So as you can see, again, the application is wide-varied, and this is just one hybrid electric vehicle, and we'll go through different architectures in the future, also understanding how it's used in different systems. So just a little bit again, elaborating on the previous slide here. To operate the electric motor, it's necessary to do a transfer of energy from the source into the load or the wheel here, and to be able to do this, it's required to build a sophisticated controller, which takes all of the feedback in the picture, where it's looking at the torque and speed and current and position of the motor.

So it looks at all of the different things, where it's making the decision on how to control the machine. Controlling the magnetic field of the machine requires controlling the current. So as you might have learned in the classes earlier, in your bachelor's or master's, is that the torque output of a motor is proportional to the current. So if application is to drive the vehicle with a certain torque output, you need to be controlling the current. So this is the important controlling loop which is required, and in the future weeks, we'll look into how to simulate one.

But for now, let's just look into some of the background to build up on for the coming weeks. So the current feedback is integrated into the power electronics unit, which is taking in the current and the torque command, and then be able to convert that into providing an actual torque output. The modern applications do not only involve use of passive switches, but they also use active switches. So there are passive switches and different sort of methods where we can command a device which is on, and like different contactors and relays and switches, and then single pole, single throw, double pole, single throw.

So all those different sort of switches, which are basically driving an on and off sort of event. But these switches are very, again, they are not controlled through a PWM or do not receive that fast response time. We are looking to basically control these devices, which can respond pretty fast at very high switching frequencies. That's very crucial for power electronics applications and also to reduce the overall cost of the system as well. These devices here act as a controller to achieve the desired power flow and in the form of energy.

So example could be that AC or DC at a required voltage and frequency can be achieved by using the active switching devices here. So some of the examples here are like using the MOSFETs and IGBTs and SCRs and then different switches, which you can control. So we will look into that in detail in the week three, where we'll go through all the different switches and also focus upon some of the next generation technologies like silicon carbide and gallium nitride and how they are used and what's driving the technology.

The below image here will show different applications of power electronics, even though I have touched base a little bit on automotive here in the past few slides. The application is again numerous and very wide where power electronics is used in healthcare, in aerospace, aerospace also uses a lot of power conversion to different power supplies where you are powering a certain AC or heater into the plane and you are also powering certain devices, the car charging, the station. So you have got, you are charging within each seats on the plane, which is being converted from a higher level of power.

And then these aerospace applications are also expanding in the future where you are looking into electrified plane, which is not using any engines or anything. It will be built based upon a renewable energy source and also looking into power electronics. The renewable energy and microgrid is again a very huge expanding area where PV, photovoltaic cells and wind energy and generators and other things can be connected together where you are looking to generate a power with an optimized efficiency. And also improving the overall cost of electricity so you do not pay that much to generate it.

Consumer electronics such as the different microwaves or heater or AC or TVs, all of these today use power electronics in different sorts where they are either controlling or converting a voltage from 30 volts to 5 volts. There are, there are current levels which are driven from 5 amps to 300 amps for various sort of pulse applications. And also in other satellite and different applications and defense and other things that's being used. So the application is really wide if you're looking into the power electronics and that really opens up a lot of opportunities for your career as well.

Again, converting upon an energy from different sort of sources as we talked about, primarily there is DC-DC conversion, AC-DC conversion, DC-AC and AC-AC. These are basically utilizing one or different form of power electronics to be able to generate different energies. So let's look into the DC-DC, we are basically controlling and converting one DC voltage form or current into another one. This could be, for example, we are converting a voltage from 100 volts to 50 volts and then to be able to drive a certain load. And it will also basically require a certain power mechanism because decreasing the voltage would refer to increasing the overall current output based upon the load.

So that's the main application here to be able to use either it as a step down or step up or even do a sort of bi-directional as well on the DC-DC conversion. The AC to DC here is using as a rectifier and this is not a passive rectifier. We are looking to build an active rectifier where you can control and then see when the switch is triggered and to be able to drive and convert your AC waveform into a DC to produce a clean and nice DC voltage and also from an AC current source.

There's also DC-AC conversion. This is typically the inverter application where you are controlling the DC to drive an AC voltage or AC current to work with different sort of applications to drive either a machine load or to drive and resistive load or an inductive loads or variable frequency sort of loads. The AC to AC is converting one AC waveform, maybe a three-phase AC waveform into another waveform of three-phase where the frequency is different. And these sort of applications are again used in variable frequency sort of drives and also utilizing on some of the power sources which require a different frequency which you cannot generate from the grid because it's fixed at 50 or 60 hertz.

And to do all of this, control it. required for efficient and regulated power electronics design. So, nonetheless, there is a lot of emphasis on controls to be able to do this. And in coming weeks, we will also simulate some of the control aspects and see how to generate or design your power converter efficiently. So, the next slide, we will see how this controller comes into the picture, right? So, there is a power input which is available. It could be DC or AC. And the power output here, which is generated from the converter, which could also be, again, DC or AC, depending on what we are looking to do. Typically, a controller looks in as a feedback of either the voltage or current that goes into the controller from the output. Then it has a reference on what the current or voltage should be.

And it also takes in the DC side or AC side on the input as a feedback as well. So, based upon those, it will design and provide a parameter which can control the converter. So, if there are switches like MOSFETs used here, it will be generating the PWM that's required for the MOSFETs to turn on and turn off to provide your power output. So, again, this is a traditional analog feedback, sophisticated algorithms, and using the NXPEX and digital microcontrollers. So, the digital microcontrollers here, they are kind of expensive, but they offer a lot of different feedbacks that you can use and to be able to design your particular controller, right?

So, we will pause here. We will continue again on the introduction to Power Electronics and also dive into the applications of Power Electronics next. Thank you. Thank you.

Want the rest of Design Concepts of Power Electronic Converters for Industries?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design Concepts of Power Electronic Converters for Industries course

The remaining 52 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design Concepts of Power Electronic Converters for Industries course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.