Free · 3 lessons · no paymentDesign and Analysis of Piperack Structures using STAAD.Pro: 3 free lessons
Three free lessons from Skill-Lync's Design and Analysis of Piperack Structures using STAAD.Pro course. They introduce pipe racks and their design inputs, layout, shapes and dimensions, then cover fireproofing with passive and active systems. These lessons are background and design criteria for the course, and STAAD.Pro modeling is not shown in them.
Last updated 16 Nov 2026 · 3 free lessons (58 min) · full course: 49 lessons (21 h 20 min), paid · ₹40,000
Free lesson 1 · 26 minPipe Rack Basics: Design Inputs, Layout, Shapes and Future SpaceWhat will you learn in the free Design and Analysis of Piperack Structures using STAAD.Pro lessons?
- Design inputs for a pipe rack
- Pipe rack shapes, widths and clearances
- Steel versus concrete pipe rack choice
- Passive and active fireproofing systems
Free lessons you can watch now
Lesson 1 · 26 minPipe Rack Basics: Design Inputs, Layout, Shapes and Future SpaceThe instructor introduces pipe racks as non-building steel structures that support pipes, power cables and instrument cable trays in petrochemical, chemical and power plants. The lesson covers the primary design inputs (plot plan, P and IDs, client specification), why multiple tiers are used, rack shapes such as L, T, U, H and Z, and the 25% or 10% future expansion allowance.
Lesson 2 · 16 minPipe Rack Width, Clearances, Materials and Fireproofing BasicsThe lesson gives typical pipe rack dimensions, including 6, 8 or 10 meter single-bay widths, column spacing of about 6 meters, minimum clearances of 4 meters under units and 2.2 meters offsite, and road clearances of 7 and 5 meters. It also compares steel and concrete racks and begins fireproofing, using 537 degrees Celsius as the steel failure point.
Lesson 3 · 16 minFireproofing Pipe Racks: Passive and Active SystemsThe instructor compares passive fireproofing (poured concrete, lightweight concrete, cementitious coatings, gypsum boards) with active water spray systems, noting that passive systems are usually rated for 2 to 4 hours. The lesson also lists effects on pipe rack design, such as extra dead load and seismic mass, and a larger surface for wind load.
Which lessons of Design and Analysis of Piperack Structures using STAAD.Pro are free?
The first 3 lessons are free on Grow by Skill-Lync: 58 min of video from Skill-Lync's Design and Analysis of Piperack Structures using STAAD.Pro course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 46 lessons are listed in the outline below so you can see what each one covers.
How long is the Design and Analysis of Piperack Structures using STAAD.Pro course?
The full course has 49 lessons and 21 h 20 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 58 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid Design and Analysis of Piperack Structures using STAAD.Pro course on Skill-Lync, with mentor support and a certificate. For a career in Civil & structural, the Post Graduate Program in Steel Structures goes further with industry projects and placement support.