← Previous lessonFree lesson 2 of 3 · lesson 2 of 29Next lesson →

Unlock all 29 lessons of Civil Engineering Fundamentals ModuleFull course ₹40,000 · paid

Price & syllabus
Free lesson · 21 min · no payment

Glass, Timber, Reinforcement Bars and Structural Steel

A free lesson from Skill-Lync's Civil Engineering Fundamentals Module course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to Construction Technology: Building Materials”

What will you learn in this free Civil Engineering Fundamentals Module lesson?

The lesson covers glass, timber (hardwood and softwood) and steel reinforcement, including plain bars, HYSD bars, TMT bars, wire reinforcement and prestressing steel. It closes with structural steel, listing its strength, factory fabrication, fire and corrosion behavior, and its drawbacks.

  • Glass and timber properties and limits
  • Plain, HYSD, CTD and TMT bars
  • Meaning of Fe grades and the D suffix
  • Structural steel advantages and disadvantages

What comes after lesson 2?

The next free lesson is lesson 3, “Aggregates: Properties and Laboratory Tests for Concrete” (32 min). Later in Skill-Lync's Civil Engineering Fundamentals Module course (paid): lesson 4, Introduction to Cement and Admixtures in Construction Technology; lesson 5, Types of Special Cements and Their Uses in Construction; lesson 6, Introduction to Construction Technology. The full course has 29 lessons (10 h 57 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello and welcome back to our online course on Introduction to Construction Technology. Now let's see about the building material glass. Glass is one of the versatile and oldest material in the construction industry. It has been a fascinating material ever since it was discovered. Glass has the properties as a transparent glazing material and is used in various architectural applications like doors, windows, partitions, etc. Glass is a unique transparent material that allows light to pass through it and makes the object visible clearly, thus allowing us to connect with the outer world visually.

It enables the light to flow inside the room, thus enhancing the beauty of the home and boosting up the moods of the occupant. Glass has a smooth glossy surface and so it can be cleaned efficiently. Laminated glass can be made with a wide range of colored interlayer to provide exceptional lighting effects. These colors can be combined with tinted and printed glass to produce different results. Glass is fully weather resistant. It can withstand the effects of wind, rain or sun and can retain its appearance and integrity in most of the given conditions.

Additionally, glass does not rust and do not degrade from surrounding environment. Glass is 100% recyclable and do not degrade during recycling process. It can be recycled without compromising on quality and purity. Main disadvantage of using glass is its cost, brittleness, less impact resistance and unsafe for earthquake prone areas. Timber Wood is a natural material that has been used for the construction of buildings, bridges and various other structures over thousands of years. Wood can be fabricated into all kinds of shapes and sizes to fit any construction need.

Wood is further processed and transformed into timber, loomer etc. Some examples are plywood, fiber boards, chip boards, compressed wood, impregnated wood, etc. Timber is described as the structural product of wood. Timber is light in weight and can be handled easily. It is readily available and economical. Timber is hard and durable. It is capable of taking up loads slowly and suddenly. Wood is further classified as hardwood and softwood. Hardwood is a dense wood obtained from oak, teak, mahogany and salt trees. Hardwoods are generally used for flooring and finishing purpose as they have higher densities.

They are also used for wall paneling, cabinet making and furniture making. Now let us see about softwoods. Softwoods are obtained from evergreen trees like pine, chir, fir, deodor, etc. Softwoods are cheaper than hardwoods. But softwoods are most commonly used for structural framing of wood buildings mainly in North America. It provides good insulation for cold, thus making it an excellent building material to construct residential buildings in colder regions. Timber can be easily connected with using nails, screws, bolts and connectors. Main disadvantages is it is likely to crack, wrap, bend and decay if not seasoned properly with preservatives.

It requires regular maintenance or will susceptible to termite attack if not maintained properly. The characteristics of timber makes it an ideal construction material. It is a renewable resource and can make an essential contribution to achieve sustainable building. Reinforcement rods Steel has proved to be an ideal material as a steel reinforcement to complement concrete because the thermal expansion of both material is the same. In other words, when heated or cooled, both concrete and steel expand or contract equally. Concrete requires some form of tensile strength to complement its brittle behavior.

Steel also bonds well with concrete. In a composite material, the bond between two materials is necessary so that it functions as a single material. As the water from concrete evaporates, it shrinks and grips the steel bars also making a mechanical bond. Steel reinforcement is used in the form of rebar or wire of steel which is utilized in concrete members to resist primarily tensile forces caused by externally applied loads. The most common type of reinforcement are plain and deformated reinforcing bars. Pre-stressing steel and wire reinforcement made of steel.

Types of steel reinforcement. There are three types of steel reinforcement. Rebars, which we normally used for reinforced cement concrete, wire reinforcement and pre-stressing steel. Rebars are further subdivided into plain reinforcement and deformed reinforcement. Plain reinforcement rods. Steel used for construction was with plain mild steel bars. These bars are designated as FE 250 grade. These bars are used only for small projects in underdeveloped countries. Mild steel reinforcement rods are better for sudden impact and sudden applied loads but not widely used now. So, these plain reinforcement rods are not used widely in construction.

Deformed reinforcement rods. Deformed reinforcement bars are steel bars that have deformation on the surface. These deformations are referred to as ribs. These ribs enhance the bond and friction between the concrete and the rebar rods. The types of deformed steel bars used as reinforcement are mild steel ribbed bars, high yield strength deformated bars, it is mentioned as HYSD, carbon steel bars, stainless steel bars, low alloy steel bars, rail and axle steel bars, galvanized steel bars, low carbon chromium bars, epoxy coated bars. Now, let's see in detail about these bars.

First, let us see about mild steel ribbed bars. Mild steel ribbed bars have ribs in the bars increasing the bonding strength of the bars. These bars are not recommended by the Indian standard code or in ASTM, that is the American standards. There was no specific pattern of ribs described and different countries followed different patterns of ribs. So, it is not recommended to be used. Next is the high yield strength deformated bars, that is HYSD bars. These bars completely replaced the mild steel bars. These bars are available in different grids like FE415, FE415D, FE500, FE500D, FE550, FE550D, FE600.

Here, FE indicates 0.2 percentage of proof stress or yield stress in Newton per mm square. And D indicates the ductility. The deformed surface ensures a better bond between reinforcement and concrete. These bars results in a considerable increase in yield, tensile and bond strength when twisted, hot or cold. HYSD bars are of two types. Cold twisted deformed bars, CTD bars and thermomechanically twisted bars. These CTD bars, cold twisted deformed bars, were sold in India under the brand name Tor Steel. The other one is the TMT bars, that is thermomechanically twisted bars or treated bars.

TMT bars are treated by a process in which red hot ribars are quenched through a series of water jets, causing a hardened outer layer surrounding a softer core. These TMT bars have higher yield strength than mild steel. Thermomechanically treated bars are produced in various grids by Steel Authority of India, that is SAIL, and Tata Steel. The trade names of these bar are known as Sale TMT and Tiscon TMT respectively. Thermo-mechanical treated bars are nowadays a fundamental requirement for construction in India. TMT bars have improved properties such as yield strength, ductility, toughness and corrosion resistance.

TMT bars have high strength to seismic loads due to its higher ductility. These make them as most suitable for use in earthquake prone zones. TMT bars are economical and safe for use. Hence it is widely used as reinforcement for the construction of roads, buildings, bridges etc. TMT bars are recommended for use in high-raise buildings because of saving in steel due to higher strength. Now let's see about carbon steel bars. Carbon steel bars are most commonly specified type of reinforcing bar and can be used wide variety of application where there are no special performance requirements.

Rebar that is without anti-rust coating and has the lowest price compared to zinc coating and epoxy coating are called carbon steel bars. Next is the low alloy steel bars. The steel used in the production of these bars shall be made by the process of electric furnace that is basic oxygen or open hearth process. Next is the stainless steel bars. Stainless steel bars have features of long life cycles and long term corrosion resistance property. Although it is more expensive rebar, it has superior effectiveness of cost. Rail and axial steel bar.

Rail means steel and axial means steel deformed bars for concrete reinforcement. These types of bars are designated with R for rail steel and A for axial steel. Galvanized steel bars. It is a normal black rebar with a layer of zinc coating which can prevent the rebar from rusting and corrosion. That is what a galvanized steel bar is. Next is low carbon chromium bars. The chromium steel used to manufacture reinforcing bars has low ductility and a relatively large minimum yield strength. So these rebars are permitted to be used only as spiral reinforcement or transverse reinforcement in columns.

Epoxy coated bars are now used in the construction of parking garages, marine structures, water and wastewater treatment plants and other hydraulic structures. Next let us see about the other subdivision wire reinforcement and pre-stressing steel. Wire reinforcement. The various deformed wires that can be used as a steel reinforcement are hard drawn steel wire fabrics, welded deformed wire fabrics, epoxy coated steel wire and welded wire. Stainless steel wire and welded wire. This hard drawn steel wire fabrics are made by a series of wires arranged at right angles to each other.

Welded deformed wire is fabricated from a series of wires arranged at right angles to each other and welded at all intersections. So the difference between these two is it is arranged at right angles to each other but welded deformed wires are welded at all intersections. Pre-stressing steel. Pre-stressing steel generally consists of wires, bars, strands or bundles of such elements. The steel is stressed under high tensile forces either before the concrete is cast that is named as pre-tensioning or after the concrete is cast and as hardened that is post-tensioned structures.

This pre-stressing steel is used in pre-tensioned and post-tensioned structures. So next let us see about structural steel. Steel is one of the strongest building material available with excellent strength and capacity in both tension and compression. A steel structure is highly recommended for large span and heavy structures which benefits all types of industrial buildings. Extremely long open spans are possible using steel that would not be possible to implement in concrete. Steel is also used to create more complex designs. Steel's greatest design asset may be its ability to span long distance without interrupting the related interior columns.

That is why aircraft hangers buildings are constructed by steel framing. A clear span interior space provides more floor plan flexibility. Structural steel components are stronger and lighter than the components made of weight bearing concrete or wood. This makes the construction of steel structure stronger and more durable. Steel structure can withstand extreme forces or harsh weather conditions such as earthquake, strong winds that is hurricanes and heavy snow to a larger extent. They are rust proof and are not affected by termites, bugs and fungal contamination. Steel structures are more resistant to fire compared to wooden or RCC that is reinforced cement concrete structures.

Steel would weigh more due to its density. However, when steel is used in framing, the design of beam will cause it to be lighter than a concrete beam. Steel parts in a steel structure are pre-manufactured to a specific design inside the manufacturing plant or fabrication shop and are shipped out in ready to be erected condition. Structural steel is difficult to make on site. It is generally cut, shaped and drilled in a fabrication shop as per the design specification and drawing provided and transported to site. Hence, it speeds up the construction time significantly.

So, it is possible to complete large scale projects in a very short period than usual. Steel is incredibly versatile as it can be molded into almost any shape which makes it an attractive option for both residential and commercial building. Thus, still having the ability to design and construct a building that is both strong and safe. Flexibility is one of the greatest advantage of steel structure which means that it can be designed as per the required needs. This helps designing a steel structure in such a way that it can withstand heavy winds or earthquake especially in case of bridges or tall towers.

Ductility of steel permits steel buildings to bend out of shape or deform without collapse if there is any breakage risk. Thus, giving warning to the inhabitants to vacate beforehand. Breakdown for a steel structure neither happens overnight nor a steel structure rarely can collapse. That is why steel structure buildings are less affected by earthquakes. In brief, a steel structure will give you time to exit from the building in case of sudden collapse. Steel structures are highly fire resistant and it reduces the fire accident risk to a building if there are more steel structure in a building.

Even though steel structures are highly resistant to fire but less when compared to RCC structure. Steel structures are wonderfully moisture resistant and this depends on the carbon content of the steel being used for the structure. Hot zinc coating and extra powder treatments for enhanced rust resistance will make a structural steel component even more resistant to weather fluctuation and abrasive effects of outdoor climate. Structural steel is available in standard shapes such as L angles, I beams, C channels, box channels, hollow steel sections, pipes, T's etc. Steel structures can be easily built using various methods such as welding, bolting or reverting and can also be disassembled without hassles.

This reduces the time taken to make a structure and hence professional steel fabricators use steel for temporary structures. This is also favorable when you want a strong structure with a short span of time. A steel structure is not that cost efficient in all conditions. The cost of structure also depends largely on its type and functionality. If you want to construct large span building then it is advisable to use steel. While cost of small structure with steel will be more as compared to wood or concrete. There are some disadvantages of structural steel buildings also.

It is not easy to make field corrections once it is fabricated from the site. If one or more components do not fit properly due to fabrication error then rectification of those errors is very difficult at site. When steel structures are exposed to severe or aggressive weather conditions it may get corroded due to the action of steel with atmospheric oxygen or aggressive environment. For preventing such a problem expensive application of paint is required frequently. Hence the maintenance cost of steel may go up which is a sure concern for a common user.

Also the initial cost of steel structure is higher as compared to concrete or wooden structure. You can think of which means to be determined by a piece of steel structure is higher as a strand of steel structure. So if you need to use that as an example to get this as an example.

Want the rest of Civil Engineering Fundamentals Module?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Civil Engineering Fundamentals Module course

The remaining 26 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Civil Engineering Fundamentals Module course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.