← Previous lessonFree lesson 3 of 3 · lesson 3 of 12

Unlock all 12 lessons of CFD Simulation using SolidWorksFull course ₹40,000 · paid

Price & syllabus
Free lesson · 8 min · no payment

Global vs Plot Maximum in Parametric Study Legends

A free lesson from Skill-Lync's CFD Simulation using SolidWorks course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Understanding global maximum and plot maximum”

What will you learn in this free CFD Simulation using SolidWorks lesson?

The instructor answers a student question on legends in a parametric study. He sets a cut plot to global minimum and maximum, runs inlet velocities from 1 to 20 m/s, compares it with plot maximum, and warns against typing legend limits manually.

  • Setting a cut plot to global minimum and maximum
  • Adding inlet velocity as a parametric study range
  • What plot maximum does to the legend values
  • Using line probes to compare velocities

What comes after lesson 3?

Later in Skill-Lync's CFD Simulation using SolidWorks course (paid): lesson 4, Pipe Flow Simulation - performing parametric studies; lesson 5, Transient Flow Simulation of flow over a cylinder; lesson 6, NACA Airfoil simulation. The full course has 12 lessons (3 h 46 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Part 1

Hey guys, hope you're all doing good. A lot of you had questions regarding how to set up the legend correctly when you're doing a parametric study with flow simulation. So one thing you need to do is before you run the parametric study, first create the basic cut planes that you want. So for example, I'm just going to create a cut plane. I'm going to be using the XYZ planes and maybe let me just select the YZ plane. And what I'm going to do is I'm going to be making a plot of the velocity. All right.

And then almost immediately you can see that there is a button which says adjust minimum and maximum. So let's click on that. And you need to make sure that you set this to global maximum and minimum. All right. So now what I'm going to do is here you can basically reset this to plot maximum and plot minimum, which would also work. Now, do not type in numbers here. For example, I've seen that some students type in a value of 10 meter per second or 11 meter per second.

You know, that's not going to work because in your challenge, you're changing the Reynolds number, which means your velocity is going to increase. So in other words, you don't want to set the minimum and maximum value of velocity. If you do that, then that range might actually be too narrow for a case with higher Reynolds number. And your plot is all going to appear red. All right. So make sure that this is set to global maximum and minimum. And then what I'm going to do is I'm going to right click and then select new parametric study.

And then we are just going to click on add simulation parameter and I'm just going to select the boundary condition. And let's just take the inlet velocity and select the velocity normal to the face. You can see that it's initially set at 10 meter per second. And what I'm going to do is I'm going to select this option range with number. So we're going to be starting at one meter per second and we're going to go all the way up to be 20 meter per second.

And we're going to have three values in between and click OK. All right. And then for the output parameter, I'm going to select add results and I'm just going to select the cut plane. And then I'm going to select the cut plot and click OK. And then if we go to scenarios, we can just click on run. All right. So looks like we have the results. So now if I click on a plot, you can see that the scale goes from 0 to 1.096 for the first one.

And for the last one, it goes from 0 to 21. Now, this is technically the right plot. Now, you can see that near the walls, the velocity is lower. This happens because of the boundary layer formation. Now, if you create a line probe, you know, then you will be able to get the parabolic velocity profile. Now, the other option that you can use is plot maximum and minimum. So let's set that up. Click OK. And then we are going to open up our what if analysis and we are going to go to the scenarios.

And I'm just going to make sure that recalculate is enabled and I'm going to run the cases one more time. So now in this case, if I open the results, you can see that the color variation is still more visible. But don't get fooled. If you look at the values of the legend, it goes from 16 to 21 meter per second. So what's happening is really small values are being cut so that you can actually see the variation. Now, for presentations, this is fine. But from a technical point of view, both the plots, whether you use global maximum or plot maximum, you're going to get equivalent results.

And at the end of the day, you will have to use line probes to basically compare the velocities. All right. Hope that makes sense. Now, the final note that I wanted to make is when you go to the cut plot and when you're basically trying to add the legend, never add the values manually. So you should never put the max value and min value manually, especially if you're doing a parametric study. And I hope the reason for that is clear. All right. With that, I would like to conclude this help video.

Thanks for watching. Bye.

Part 2

ڈوستو امید ہے آپ سبھی اچھا کر رہے ہوں گے آپ میں سے بہت سے لوگوں کے سوال تھے کہ ایک parametric ادھیان کے دوران flow stimulation کے ساتھ کیسے legends کو صحیح طریقے سے ستھاپید کیا جا سکتا ہے تو ایک بات جو آپ کو کرنے کے عوش شکتہ ہے وہ یہ ہے کہ آپ parametric ادھیان کو کرنے سے پہلے basic cut plane بنائیں جو آپ چاہتے ہیں اس لیے ادھارن کے لیے میں بس ایک cut plane بنانے جا رہا ہوں میں xyz planes کا استعمال کرنے جا رہا ہوں مجھے yz plane select کرنے دے میں velocity کا ایک plot بناؤں گا پھر ترنت آپ دیکھ سکتے ہیں کہ ایک button ہے جو adjust maximum minimum کا ہے تو اس پر click کریں آپ کو یہ سنشت کرنے کے عوش رکتا ہے کہ آپ نے اسے global maximum اور global minimum پر set کیا ہے تو اب آپ یہاں reset to plot maximum اور reset to plot minimum پر click کر سکتے ہیں اب یہاں سنخیاؤں میں type نہ کریں ادھارن کے لیے میں نے دیکھا ہے اکثر کچھ چھاتر 10 میٹر پر سکنڈ یا 11 میٹر پر سکنڈ کے value میں type کرتے ہیں یہ کام نہیں کرنے والا ہے کیونکہ آپ رینالڈز نمبر کو بدل رہے ہیں جس کا عارض یہ ہے کہ آپ کا velocity بڑھنے والا ہے اس لیے دوسرے شبدوں میں آپ velocity کا minimum اور maximum value نردھاریت نہیں کرنا چاہتے ہیں یہاں آپ ایسا کرتے ہیں تو high رینالڈز سنخیہ کے ساتھ وہ range واسطہ میں کافی کم ہو سکتی ہے اور آپ کا plot لال دکھائی دینے لگتا ہے سنشت کریں کہ یہ global maximum and minimum پر set ہے اور پھر right click کر کے پھر new parametric study کو چنیں پھر ہم add simulation parameter پر click کریں گے اور میں بس boundary condition select کرنے جا رہا ہوں بس inlet velocity لیں اور velocity normal to the face کو select کریں آپ دیکھ سکتے ہیں کہ یہ شروع میں 10 میٹر پرتی سیکنڈ پر set ہے اور میں اس option کو select کروں گا range with number اس لئے ہم ایک میٹر پرتی سیکنڈ سے شروع کرنے جا رہے ہیں اور ہم 20 میٹر پرتی سیکنڈ تک لے جائیں گے اور ہم بیچ میں 3 values رکھیں گے اب ok پر click کریں پھر output parameters کے لئے add results کو click کریں اور پھر میں cut planes کو select کروں گا اور پھر میں cut plate کو select کروں گا اب ok پر click کریں اور پھر یہاں آپ scenarios پر جاتے ہیں تو ہم run پر click کر سکتے ہیں اس لئے ایسا لگتا ہے کہ ہمارے پاس results ہیں اس لئے اب یدی میں ایک plot پر click کرتا ہوں تو آپ دیکھ سکتے ہیں کہ پہلے کے لئے scale 0 سے 1.096 تک جاتا ہے اور انتیم کے لئے یہ 0 سے 21 تک جا رہا ہے اب یہ تقنیقی روپ سے صحیح plot ہے اب دیکھ سکتے ہیں کہ wall کے پاس velocity کم ہے یہ boundary condition formation کے کارن ہوتا ہے اب یدی آپ ایک line probe بناتے ہیں تو آپ parabolic velocity profile پرابٹ کر سکیں گے اب دوسرا ویکالب جو آپ پیو پیو کر سکتے ہیں وہ ہے plot maximum اور plot minimum setup کریں ok پر click کریں اب ہم what if analysis open کریں گے ہم scenarios پر جا رہے ہیں اور میں بسے سنشت کرنے جا رہا ہوں کہ recalculate enable ہو اور ایک بار پھر سے اسے run کر کے دیکھتے ہیں تو اب اس case میں یدی میں results کھولتا ہوں تو آپ دیکھ سکتے ہیں کہ color variations ابھی بھی دکھائی دے رہا ہے لیکن یدی آپ legends کے values کو دیکھتے ہیں تو دھوکے میں مت آئیے یہ 16 سے 21 میٹر پرتیس سیکنڈ تک چلا جاتا ہے تو یہ واسطب میں چھوٹے values میں cutoutی کی جا رہی ہے تاکہ آپ واسطب میں variations دیکھ سکیں اب presentation کے لیے یہ ٹھیک ہے لیکن ایک تقنیقی درشتی کونڈ سے دیکھیں تو دونوں plots چاہے آپ global maximum کو اپیوگ کریں یا plot maximum اپیوگ کریں آپ کو سمان پرنام پرابت ہونے والا ہے انت میں آپ کو velocity کی تلنا کرنے کے لیے line probe کا اپیوگ کرنا ہوگا آشا ہے آپ کو سمجھ آ رہا ہے اب انتیم نوڈ جسے میں بنانا چاہتا تھا جب آپ cut plot پر جاتے ہیں اور جب آپ legend کو جوڑنے کی کوشش کر رہے ہوتے ہیں تو کبھی بھی manual روپ سے value نہیں جوڑے آپ کو کبھی بھی ادھکتم value اور نیونتم value کو manual روپ سے نہیں رکھنا چاہیے خاص کر یادی آپ ایک parametric ادھیان کر رہے ہیں مجھے امید ہے کہ اس کا کارن سپشت ہے اس کے ساتھ ہی میں اس ویڈیو کو سماپ کرنا چاہوں گا دیکھنے کے لئے بہت بہت دھنیواد bye

Want the rest of CFD Simulation using SolidWorks?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full CFD Simulation using SolidWorks course

The remaining 9 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full CFD Simulation using SolidWorks course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.