← Previous lessonFree lesson 3 of 3 · lesson 3 of 44

Unlock all 44 lessons of Automotive Wiring Harness using CATIA V5Full course ₹40,000 · paid

Price & syllabus
Free lesson · 22 min · no payment

Typical EDS Design Flow from Logical Architecture to Harness Drawing

A free lesson from Skill-Lync's Automotive Wiring Harness using CATIA V5 course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Typical Design Flow Used in EDS Systems”

What will you learn in this free Automotive Wiring Harness using CATIA V5 lesson?

The instructor walks through the EDS design flow, from logical architecture and electrical schematic to physical architecture, then harness topology and concept routing reviewed with other teams. The lesson explains how routing and schematic data combine into the harness drawing after flattening, and where CATIA V5 and PDM software fit.

  • Electrical schematic: pin-to-pin connectivity and specs
  • Harness topology as splitting a harness into pieces
  • Why manufacturing and service teams review the routing
  • Routing and schematic data combining into the drawing

What comes after lesson 3?

Later in Skill-Lync's Automotive Wiring Harness using CATIA V5 course (paid): lesson 4, Wiring Harness Routing and Packaging; lesson 5, Customized Settings for Wiring Harness Assemblies in CATIA V5; lesson 6, Electrical Part Design. The full course has 44 lessons (18 h 44 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Now let's look at the typical design flow used in EDS system. We have seen that EDS stands for electrical distribution system. Note that this is not the design process flow of wiring harness routing and packaging. This is of EDS system where wiring harness is part of EDS system. So there are two parts which are followed in the EDS design process. The top part is basically on the logical and core electrical system development. Whereas the bottom deals with the mechanical part of EDS system. So the bottom part is more on the mechanical side. That does not mean it is not dealing with any electrical properties or electrical consideration during the development process.

But by physical appearance or by application of virtual tools, it falls under the mechanical design of the electrical system. So let's talk about the first area which is logical architecture. We have discussed about the logical architecture in terminology and definition clarification. So logical architecture is basically the logical connectivity between different system or the subsystem used into the vehicle. The figure shows that the block diagrams which is used to connect the different devices, different systems in gray color and then the orange line shows the connectivity between different subsystems.

It moves to the electrical schematic as in the further development of the logical architecture by applying the set of design rules which are required to develop the electrical schematic. So electrical schematic will give the detailed electrical logic and the specification of any given system by applying different set of design rules. Electrical schematic represents the pin-to-pin connectivity of different devices used in the vehicle electrical system. It also defines the connectivity between the different systems and subsystems. It also gives the properties of all the components used into the electrical schematic such as wires, fuses, relays, any electronic components such as diodes, resistors and those specifications will be provided into the schematic diagram.

It also defines the interconnect between the different circuits to ensure that they are rightly connected to the different harnesses. On the bottom side, the physical architectures define the location of different components into the vehicle. Now, there are many rules which are used in case of physical architecture that electrical engineers should apply before defining the location of the electrical component. So physical architecture deals with all the components which are fitted into the vehicle from the front end of the vehicle to the rear end of the vehicle. Just to give an example, on the front end of the vehicle, electrical system does have the headlamps, the fog lamps which are fitted on the front bumper, whereas on the rear side, the taillights, the parking sensor, the registration plate lamps still fall under the electrical system.

So in many cases, the exterior lighting system components are decided based on the styling design by industrial designers. But there are many components where electrical engineer is responsible to mount and to decide the location of those by applying the certain design rules. So just to give an example of airbag system, airbag ECU is one of the crucial parts which has to be mounted, corrected into the vehicle environment. So the basic consideration for airbag ECU mounting or the location is, it should be placed at the center of the vehicle.

It means that it should be placed at the center axis of the vehicle and it should not have the inclined mounting to ensure that axomonitor gives the correct values to monitor and to take the decisions. So the mounting of the airbag ECU is driven by these requirements which are sometimes given by the manufacturer as well. So the decision of the placement of such a components are driven by the many requirements which has to be taken care of by electrical engineers. There are many components used in the vehicle cabin which are driven by the ergonomics requirements such as the switches which are operated by the driver or the user.

Those are called as the HMI devices. HMI stands for human machine interfaces. Now to ensure the comfort in operation by the user, it should be also checked the ergonomics during the use of those controls. For example, we should place the window winding switch or the power window switch in such a area where it is easily accessible and driver does not need to stretch his hand to reach to the window winding or power window switch. So this is a very simple criteria that I have explained, but there are many criteria that should be considered while placement of the components.

So this is an very important activity that takes place in case of EDS system design process. Once the physical architecture is ready, it moves to the next step where we define the wiring harness topology. We define the concept routing of the wiring harness and we package the wiring harness. So again based on the requirement for manufacturability, serviceability, the wiring harness topology is decided and the concept routing path is proposed to the different CFT to get an agreement for a provision of mounting in different areas to finalize the wiring harness routing and package.

Now once we have electrical schematic and wiring harness routing done into the virtual environment, these are the crucial inputs goes for the wiring harness drawing development. The technical information is phase out from the electrical schematic, whereas the mechanical or physical properties of the harnesses will be phase out from the harness routing file. So the physical properties such as the dimensions, the branch lines, the branching points will be derived from the wiring harness routing and the logical information like pin to pin connectivity, the wire gauges, wire colors, the terminal properties, the release properties will be phase from the electrical schematic.

So once we combine these two things together, it forms the wiring harness drawing. So there are many steps which are involved to create the wiring harness drawings from the wiring harness routing and the schematic, which we are going to discuss in later slides. So there are tools available which are used to integrate the electrical schematic directly into the wiring harness routing file so that it ensures that both the properties are merged together and those are automatically used to create the wiring harness drawings. It is referred as ECAD, MCAD integration in automotive industry.

So ECAD stands for electrical CAD, whereas MCAD stands for mechanical CAD. So electrical CAD is generated from electrical schematic and mechanical CAD is generated from wiring harness routing file such as CATIA files. These are required different set of tools and the integration tools to form the MCAD and ECAD integration. So moving to the next topic, which is of our interest, the wiring harness design process. Till now we were discussing about the EDS design process. Now this is the detailed process of wiring harness design process. As any design process start with the collection of the inputs and it ends with the design process, wiring harness design process also start with input collection and ends with the design releases.

So this is a brief flowchart developed for the wiring harness design process. So in case of input collection, what are the inputs required for any routing designer? It should be collected before he start wiring harness routing such as vehicle or relevant 3D data. So here relevant 3D data is referred to the specific geometry which is required to route the specific harnesses. So for example, if scope is given only for the engine harness routing, then the relevant 3D data for the engine harness routing will be required such as the engine assembly and the sensor which are mounted onto the engines.

If the scope is of the complete electrical wiring harness routing, then entire wiring harness routing data is desired to start with the wiring harness routing. Then design engineers should have the A and D component 3D data and their locations which is defined in the physical architecture that we have seen in EDS process flow and the components specification which are required to decide the wiring harness routing. Then the next stage comes to the component identification. Now I have the entire electrical component data on the physical architecture along with the vehicle environment.

Design engineers should able to identify the location and the name of all the electrical components, their systems and subsystems. So basically these are required to provide the correct logical connectivity between different components and subsystems. So the second cell is about the component identification of all electrical systems and subsystems. So once we have a data of vehicle geometry, we have all the component locations and their specifications, the harness topology can be started. So harness topology is process of splitting harness in a different pieces for better manufacturability and serviceability.

As we discussed about harness topology, there are many things driven by the harness topology. It is really important to review the harness topology with a different approach. Different concerned teams before we decide the harness topology. So when the harness topology concept is ready, it should be reviewed with the experts or the seniors which has the wide experience in this field and it should be also reviewed with the manufacturing and service teams before it goes to final. To finalize the harness topology, the manufacturing and service team inputs are very crucial. Always ensure that the wiring harness topology and routing is discussed and agreed along with the manufacturing and service teams because manufacturing and service teams are going to deal with the harnesses for the product lifetime.

So in case of a review, if there is some disagreement, then again it should go to the harness topology concept generation, it should be reviewed and then agreed and then it should go to the next step called as concept routing and packaging proposals. Now this is the detailed version of the harness topology. Here we define the concept routing of the wiring harness. So concept routing is basically the path definition, the different mounting proposals, different channel proposals if they are required to use in the wiring harnesses and the different parking proposals.

So in the concept routing, the design engineer should ensure the basic consideration while proposing the concept. For example, the consideration of high temperature zones, consideration of weight and dry zones, the correct consideration of manufacturing sequence and assembly sequence, so that ensures the maximum chances of approval of concept routing and the agreement with the required CFTs. So once the concept routing and packaging proposals are ready, it should be reviewed with the different design CFT such as body, engine, plastic, power tent teams because the wiring harness will be routed or interacted with many other mechanical subsystems.

The majority of wiring harnesses mountings will be provided on the body, so it is really important to get an agreement with the body design engineer or body system engineers before we finalize them. It is also important and necessary to review the wiring harness concept routings along with the manufacturing and serviceability teams. Now here again, the manufacturing and serviceability team inputs are very crucial because whatever routing we have done in a virtual environment that is going to be physically mounted on vehicle by manufacturing teams and it will be handled in the field by the service teams in case of the field failure.

So the manufacturing and service teams have a wide knowledge and the base of the requirements that are required to fulfill to achieve the best manufacturability and serviceability. So the exercise conduct to review the best manufacturability and serviceability is also called as DFA and DFX. So DFA stands for design for assembly whereas DFS stands for design for serviceability. So in this exercise, the manufacturing teams are provided the crucial inputs which are required for the better assembly and also they define the different failure modes can come during the assembly.

Whereas in case of DFS, the service teams plays a very important role in providing these inputs. It will be great if these failure modes are addressed in the design itself to ensure the first time right design and the minimal design changes after the physical proto development. This ensures a lot of cost saving of the organization in different design iterations. The same rule is applicable for the harness topology as well. Design engineers should also ensure that it runs the design concept through the DFME analysis which stands for design failure modes and effects analysis to cover the different functional, non-functional, the aesthetic related, the field failure related, the manufacturing related, the assembly related failures to address them at design stage itself.

So once the concept routing is reviewed and the packaging proposals are done, it is also required to review its mounting requirement along with the design safety. For example, if I need the holes onto the wheel arch, which is the basically body in white part and located just above the vehicle wheel, it is required to review the technical feasibility along with the body engine. Now, there is a basic consideration in this example that wiring harness designs engineers should aware that any clipping joints is not perfectly sealed.

It means if I make a direct hole from the dry area to the wet area, there are high chances of getting the water ingress through the mounting holes. That means while proposing the wiring harness mounting requirements, these basic things should be verified before it goes to the body engineers. So in this example, instead of demanding for a hole, the design engineer can go for the bracket which is welded on the wheel arch and the holes can be provided onto the bracket. So in that way, the requirement of the wiring harness mounting plus the requirement of sealing are addressed.

There could be many packaging constraints which can be problems to provide the wiring harness mounting provisions in different areas. So should be discussed, reviewed before finalizing the mounting or the packaging of any given wiring harness. Now, once this exercise is done and entire CFT and manufacturing and service team is in agreement, it is also required to review the design with the quality teams. So the quality teams provide the inputs which are necessary to implement to achieve the best quality of the given product. So these inputs can be related to the enforcement into the specification of used components such as sealed connectors, secondary locks or the extra protection in some areas where the field failure were recorded in the past projects.

So once routing finalizes done, it goes for the flattening and harness lines creations which will be given to the vendor for manufacturing of wiring harness. So flattening is basically done before wiring harness drawings are created. So why the wiring harness flattening is required? Now if you take an example of any sheet metal brackets, those are the simple straight surfaces which are formed with the different holes or different bends or different angular shapes or flanges. But in case of wiring harness, it is completely the flexible flow in a 3D environment which can be straight in any given angle or at any given plane.

So to form the wiring harness drawings or to create the planar layout of the wiring harness, it is required to flatten the flexible bundles in 3D environment. So there is a separate workbench which is used for the wiring harness flattening which we are going to discuss in later sessions to flatten the entire wiring harness in a given plane. So once the wiring harness flattening is done, it is available to place on the wiring harness drawings. So wiring harness drawings is basically again combination of two properties of wiring harness.

One is electrical and second is mechanical. The electrical property defines the electrical connectivity and the specification of component that should be displayed or provided onto the harness drawings. The mechanical properties defines the lengths, dimensions or any other information related to the bill of material should be part of the harness drawings. There are also importance of nodes that should be provided into the harness drawing such as the special instruction to be used to handle the important components. components used in the wiring harnesses or to provide the different instructions for the correct dressings to ensure the wiring harness appearance by the wiring harness manufacturer.

Now once the wiring harness drawings are ready and reviewed with the supplier, it should go for the design releases. The design engineer should ensure that before go for a final design releases, it should be reviewed with the harness manufacturer to ensure that the contents of the drawings are sufficient and to go for the harness manufacturer. There could be many questions come in this stage where the design engineer should address and to provide the correct information to the manufacturer to ensure the first time right implementation of a design.

Once it is agreed by the harness manufacturer, the designer can go for the design releases. Now there could be the question that where this Katiya comes into the picture in all these processes. Why we need the virtual tool or virtual design process to make sure that we follow this design process correctly. So to answer these questions, I have another slide. So the right hand side are the involvement of the virtual tool at different stages. So for example, in case of input collection, the data analysis should be done in Katiya V5.

Same is applicable for component identification. So whatever architecture is available, that should be reviewed in the virtual tool such as Katiya to identify the different components in the system. Likewise, the architecture is available in the virtual tool such as Katiya V5. Honest topology proposals can be made into the virtual tool and then it can be reviewed in a virtual tool along with the entire CFD. The data presentation in virtual is always close to the reality so it is very easy to get a buy-in or to create an actual picture of the given concept which can be easily understandable and quickly understandable by the entire CFD committee.

The reviews can be done in the virtual environment which can be used to explain the different concepts that you have created for the Harness topology. So concept routing and packaging proposals has to be created in the virtual tool and it should be submitted to all design CFD, manufacturing and service teams for a review. So this can be done through the PDM software where the revision controls or the data entry controls can be made available to each and every party of the design teams. Likewise, the harness topology concept routing and the packaging proposals can be reviewed into the virtual environment with all the design CFD and it can be easy to take a decision in that stage.

Routing finalization is done in the virtual environment. So in Katya there are different tools available for wiring harness routing which we are going to learn in this course and those are used to define the wiring harness routing very close to the practical world of the vehicle manufacturing. Once the routing finalization is done, the flattening and harnessing has to be created in the virtual environment like Katya. The design releases can be handled by the PDM softwares which are widely used in the industry to control the different design stages and the different design revisions like Teamcenter, PLM and Microsoft windshields.

So this is basically depends on the OEM what PDM integration is used in their own processes.

Want the rest of Automotive Wiring Harness using CATIA V5?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Automotive Wiring Harness using CATIA V5 course

The remaining 41 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Automotive Wiring Harness using CATIA V5 course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.