← Course overviewFree lesson 1 of 3 · lesson 1 of 37Next lesson →

Unlock all 37 lessons of Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5Full course ₹40,000 · paid

Price & syllabus
Free lesson · 21 min · no payment

Body in White Basics and the Vehicle Development Process

A free lesson from Skill-Lync's Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to Automotive Body Invite (BIW) Design and Concepts”

What will you learn in this free Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 lesson?

The instructor explains why OEMs want engineers who can justify each dimension, then compares body-on-frame and monocoque construction and common car body types. He defines body in white and outlines the vehicle development process, including benchmarking and carry-over studies in pre-design.

  • Body-on-frame versus monocoque (BIW) structure
  • Why OEMs cut weight in the car body
  • What body in white means and where it fits
  • Benchmarking and carry-over study in pre-design

What comes after lesson 1?

The next free lesson is lesson 2, “Design Engineering Process and Benchmarking Case Studies” (33 min). Later in Skill-Lync's Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course (paid): lesson 4, Graphic User Interface of XC; lesson 5, Learning Sketch Tools in the Next Step; lesson 6, Curve Related Tools in NX. The full course has 37 lessons (19 h 51 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Good morning guys. I am Subramanian Janaki Raman. I will be your tutor for Automotive Body Invite, BIW. And here we are going to see a lot of BIW concepts and design constraints like how do you design and develop a hood, fender, roof, body side, side doors and back door. So, why did I specifically choose BIW? You will come to know as the slide goes. And this is a project based training where you will be given the input surfaces and you will start working on the models so that you get tutored well on your CAT skills and also your engineering skills.

One should remember that not CAT skills is important for getting a job inside an OEM. No OEM needs a CAT designer but every OEM needs an engineer who engineers the models or develops the models. Building a part in CAT can be done very easily without any difficulties but the reason behind giving each value or each decision making dimensions is what is called as engineering. Even a normal 9th or 10th grade student now does a very brilliant CAD models but as an engineer we will have to know why we designed that or why we give that particular dimension.

And our course on BIW is going to tell you the master sections and their reasons for why we have kept this dimension for what purpose. And this is what is very important and this is what the company targets. And people who are knowledged with this information is what the company needs, the OEM needs. Let me now get into the basics of car bodies. As you people might know like car bodies were built on two different terrains. Previously we called it as body on frame. If you guys remember the Contessa Classic, the Premier Padmini, these cars are called were built on a frame above which the body was relatively made.

Which means the frame is different and the BIW is different. Monocoque is the BIW what we are going to learn now because now the frame and the body structure has been integrated together to reduce a drastic weight on the car body. Every OEM is now concentrating on reducing the weight a lot so that you improve the performance of the vehicle. Everybody concentrates on reducing the weight, reducing the extra weight which is no more needed for a car so that you improve the performance of the car.

Improving the performance in sense will also have the impact of the mileage, the crash requirements and the passenger safety. Say for example if a human goes and hits a strong body he gets attacked more whereas the same human who goes and hits in a body which collapses will have less damage to the human also. And that is what is basic engineering and that is what is the reason for migrating the body on frame towards a BIW. We mostly concentrate on steel because majority of the OEM is still now using only steel materials as the raw material for preparing this BIW.

Of course we will also be seeing a migration or the difference between how a steel behaves and an aluminium behaves. This will also be one of our syllabus where in one commodity we will be seeing how will an aluminium react and how is a steel going to react with respect to the manufacturing constraints. So it is not only the design when we design we will be having the manufacturing constraints in our mind and then we start designing the part. And basically guys I don't believe in the PPTs so if you people are listening to my video just listen to my words and even after later when the video gets over you can look at the PPT and see what real content is there inside the PPT.

In fact I would have covered all the words what is there in the PPT through my conversations. I would have added something extras also, some messages extras also which will be really helpful for you when you perform in an interview or to have it as a knowledge for you. You can put that knowledge in your work culture so that things are really easy for you in the near future. So now the basic understanding or the basic difference between body on frame and monocoque is body on frame has a separate rigid frame or the floor structure above which the body is constructed whereas BIW is an integration of the body on frame and the upper body as one unique or one uni body and this is what we call as monocoque and this is the BIW.

Now how do we differentiate the cover bodies with respect to the shape? See now you have SUVs, sedans, trucks, minivans, convertibles, coupe, wagons. Yeah wagons are not really famous in our market in Indian market specifically. And now the thing which is getting famous in Indian market is the crossover concept. So what is crossover? Integrating two different styles. So putting in, now Tata Aria is a crossover of MUV and an SUV. So what is MUV? MUV is a multi-utility vehicle. SUV is a sports utility vehicle. This sports utility vehicle does not play any major role by the BIW guys but this is based upon the performance on the engine side.

So coming to Tata Aria, Tata Aria is a crossover where you integrate MUV's features on a SUV. So this is what is a crossover. This can be done. Now the reason Tata TIGOR is a crossover of sedan and an SUV. So it looks like, it looks quite similar to a sedan. The tailgate functionality is very similar to a sedan's functionality whereas the performance of the car is a kind of SUV's car. So we call it TIGOR. Nexon also. So now this crossover market is getting into, getting little famous in our Indian industry.

And now the SUV has also become small to reduce the price of the vehicle. And that we call it as compact SUV where Ford EcoSport is a compact SUV. And why do I do this? Because less than 4 meters they pay a particular amount of tax and above 4 meters we pay another amount of tax to the government. So when the OEM pays a lot of tax, that is reflecting on the price of the vehicle. So the price of the vehicle will increase. When the OEM pays little tax, that will again be reflected in the price of the vehicle.

So we pay less to the OEMs. Say if I am going to buy an EcoSport and I have the competitor of, say if I have only 9 lakhs or 10 lakhs as a budget. And if I wanted to buy a sports utility vehicle, I cannot go for a normal sports utility vehicle like XEV 500 or something like that. So when I go for a compact sports utility vehicle, I will choose Ford EcoSport. And then I will be choosing like, okay, Ford EcoSport is a compact SUV which meets my standards and then I will start buying that.

So this is a kind of classification for the types of car bodies and of course 4 wheel drives, 2 wheel drives. This classification is also there irrespective of the type or the shape which the car has. Now coming into the raw BAW segment, this is what is going to be our plan for this curriculum, for syllabus, for the syllabus. See, we will be looking at all these parts and roof and the body side as one of our syllabus and the design constraints of why the part is like this and why should I do all these activities, right?

And now coming into the BAWs from the monocoque, we are now slowly migrating into BAW where our syllabus starts. So BAW is the stage before you are dressing your car with your interior and exterior components. So this is going to be your body. This is going to be your car. This is how your car is going to look. After which you will be dressing your car with the interiors and the exteriors like seatings and other jewels like cockpit and different variations in the colors, different variations in your engine specifications.

These are all kind of jewels and that is why we call it body in white. All the sheet metal, we cannot call it body in gray because that doesn't sound so great. So we call it body in white because this is the unpainted body where you have only the sheet metal part inside it and this is going to get dressed after this BAW stage. And this is why we call it as BAW and to design this, it takes a lot of time and lot of energy and lot of human power, right?

And yeah, that is what is mentioned in the slide also. You know, and once you completely arrange or completely assemble all these commodities, you could see what is, you could see like what commodity it is and the complete car is now developed. And this after assembly, you get it as a, as a buyer when you see, you don't see the BAW at all. You don't see the structure which is playing a major role for the crash. You don't see the structure which is supporting the style of the car.

Okay. And after this, we, we start, we, after. Assemble, we get the complete car out and to get this complete car, this BAW is the major resource or major commodity for developing the complete car. And so, we at Skill-Lync have decided to take up this action and take up this session where we teach our engineering graduates or our engineering studying students what BAW is and how do we make our engineers expert in the BAW points. And this is about the vehicle development process. I don't know what image you people have about developing a car.

Normally, not only car, it can be a truck or it can be a two-wheeler, it can be a four-wheeler, it can be any kind of car. Normally, when you are going to develop an automotive product and now since we are going to talk about cars, I have mentioned passenger cars here, passenger cars. Normally, it takes about three to five years to completely develop a car. And this doesn't happen with just one set of team. Here, a whole lot of team is getting involved in developing each and every commodity.

The major steps involved in this vehicle development process are pre-design and development, design engineering, development engineering, and start-up production and the vehicle survey. Our course is planned in such a way that how will an engineer behave at every stage. So, if I am going to take about hood today, maybe hood will have some inputs from the pre-design segment. If I am going to talk about roof on the next class, some inputs of the design engineering stage will be there. If I am going to talk about some mechanism parts, some inputs from the development engineering will be there.

And if I am going to talk about start-up production and vehicle at market survey, this will be a separate class. Yeah. And now, today, to get a wide knowledge of what is happening on each stage, we will have to know what pre-design and development is and what things are happening inside. And respectively, on all the stages, what is going to happen and what as an engineer we will have to do. So, now, if you see here, you have the pre-design engineering phase, which will have pre-design and development phase, which will have these four steps, which is really important.

And what is benchmarking one? Benchmarking two. Whenever I talk about benchmarking, benchmarking is just a technical word of comparison. Now, if I am going to develop a pendrive, for example, I have this near me, so I am taking this as an example. Now, if I am going to develop a pendrive, see, this is what Converge CFD software system has done. And I will also have another pendrive, which is a kind of made by Transcend. So, now, Transcend is going to develop another pendrive. What will Transcend do?

He will first study what other pendrives are there in the market and what better he can give so that he can sell a lot of volume of his own company. Right? This is what is benchmarking. Benchmarking is basically a comparison of what is already there in the market and how do I implement the plus points of my competitors on my own product. This is what is called as benchmarking. And this can be of different stages again. Right? And since now, the project is at very initial stage, at this stage, I will have just be deciding what is going to be my car and what am I going to add as features in the car.

With respect to this information, I will start preparing the concepts for the car. I will start preparing my concepts. What is going to be the concept again? Again, is my car a four-seater? Is my car a five-seater car or a eight-seater car? Is my car going to be a sub-four-meter category or more than four-meter category? Am I going to produce an entry-level sedan or an SUV? So, these are all the concepts what I will be preparing and I will be at this stage, I would have also thought of putting in whatever information what I can get.

What that information is? That is about the features. If I am going to be a roof engineer, if the product planning team tells me like your part is going to have a sunroof, then I should think of what sunroof module should I adopt. Is only sunroof sufficient or is the model which I have already with my OEM, is it sufficient or not? This is what we will be doing during the concept preparation stage. And next comes the carryover study. Right? For every first generation of a car, say, there is going to be a parent.

What is a parent? Say, now, if I am going to develop a Micra, okay, Nissan Micra, if I am going to develop a Micra, this Micra will have a previous generation vehicle which could have been in the same name Micra or with a different name. Right? So, what I will do, I will take that as my parent car and I will remove all the negatives of that car and improve the present generation car. Right? And at this situation, I will also study whether I can carry over some parts.

Carry over, in essence, I can take the same parts what my previous generation Micra had and put it in the present generation Micra. Right? This is what is real integration. Right? So, when I start doing this carry over study, I will come to know how much money I will have to invest to produce the rest of the components. I don't have to produce all the parts new. Or, this carry over can be between my models also. For example, Wagoner, Swift, Swift Desire and Alto. Yeah, all these cars doesn't have different tires.

There are two or three set of tires which is being used on every car. There are two or three set of steering wheels which is being used between all the cars. There are two or three set of AC combustion unit which is being used inside all the variants. And this kind of study, you do at your pre-design and development stage so that you understand what part you are going to develop new and what part you are going to carry over from your parent car. Right? As a BIW engineer, what I will be thinking is, if I have a big module here and I have a small reinforcement inside, and I will be thinking, how will I adopt this small reinforcement so that I don't produce this again?

Producing this small reinforcement, guys, I don't know whether you guys will imagine or not, this will cost some millions. If I reduce this million cost, I will be reducing a drastic cost when it is compared to a complete tooling rules. So, what I, as a BIW engineer, will do, I will be studying what reinforcements I can use or what modules I can directly carry over. When I talk about modules, it is integrated to the doors. See, doors will have viper modules, sorry, doors will have the window regulators, window up and down motion switches, right?

The motor which is actuating the up and down motion. These things I need not develop new, unless and until I don't have a concern. Right? So, these kind of study, as a BIW engineer, we will be doing. What reinforcements I can carry over, what parts are new for me, and this study I will be doing during this carryover study. And next is benchmarking 2, which is a detailed benchmarking of benchmarking 1. What is that detailed benchmarking? If you are an engineer, you will not be developing the complete car.

You will be assigned with a commodity. Say, you are assigned with back door, tailgate. Another engineer will be assigned with roof. Another engineer will be assigned with side doors, front, side doors, rear. Right? Respectively, every individual will be working on every commodity. And you, as a BIW engineer, you will have to study or benchmark your car, your parent car and your competitor car's roof. See, now I am going to be a roof engineer. I will be studying my roof, my parent roof and my competitor's roof.

Roof might have so many parts inside. How will I develop or how will I change these parts? Right? How will I develop or how will I change these parts? Will be the challenge, will be the study, what I will be doing. And this is a very big study which takes almost 5 to 6 months. And this pre-design and development alone will take almost a year time. And this benchmarking 2 will also be seen in detail on how you will be doing a part level benchmarking. This will be the first benchmarking is a car level benchmarking that is a product level benchmarking.

And this benchmarking 2 is your part level analysis. And this analysis report will have the material, the thickness, number of parts and the total weight. This will not have these detailed features. This will just be talking about the features what you are planning to add in your car and what you really wanted to have in your car. And this is what is pre-design and development engineering. And at the end of pre-design and development stage, I will be able to understand what is the size of the car I am going to work on.

And what are the features which is already available on the car for me to work. And who are all my competitors. What best I can give to my consumers so that I sell my car a lot. Yeah, and this is what is called as pre-design and development engineering and output what you get from pre-design and development phase. And now coming to the design engineering phase. This is the very important and a very critical phase for all the cars as nowadays we don't produce a lot of proto cars.

We produce only two or three segments. So we invest less on producing the part which is wrong. Whereas we identify all the mistakes during the design engineering phase and rectify the same on the design engineering phase itself.

Want the rest of Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course

The remaining 34 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.