Lesson finished
Unlock all 37 lessons of Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5Full course ₹40,000 · paid
Automotive Paint Shop Process from ED Coating to Inspection
A free lesson from Skill-Lync's Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Complete Automotive Paint Process”
What will you learn in this free Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 lesson?
This lesson shows a video of the paint process every vehicle goes through at an OEM plant. The instructor explains how the body in white is rotated in the ED bath, then follows the heating chamber, primer, underbody sealant, painting and final inspection.
- Why the body is rotated in the ED bath
- ED coating as corrosion protection and paint base
- Drain holes that let coating liquid escape
- Primer, underbody sealant and paint inspection
What comes after lesson 3?
Later in Skill-Lync's Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 course (paid): lesson 4, Graphic User Interface of XC; lesson 5, Learning Sketch Tools in the Next Step; lesson 6, Curve Related Tools in NX. The full course has 37 lessons (19 h 51 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Now, as we saw a little about what underbody sealant is, we would also like to show you the complete paint process. This is what every vehicle undergoes on a plant or on a production unit. Yeah, I would like to open the video which explains or which shows you the ED coating and the paint process which happens on all automotive OEMs. Yeah, here you see the rails which is taking the BAW into the paint bath. This inclination angle and the time at which it is there inside the ED bath is decided with respect to the weight and the facility of the plant.
The angle at which it rotates is the angle at which all the ED droplets are let out. There cannot be any lag or any droplet can't be stored inside the body which means that will additionally react and give a more of coating there which is not our design intention. So, the body is rotated in such a way so that there is no droplet found inside or every part of the body is completely E-deposited, electrolyte deposited and this is how you prepare the car for the ED after which it goes for the sealant and the paint process.
The more better ED coating you give, the more better paint absorption and more corrosion resistance the car will. Yeah, so ED coating is actually a corrosion kind or corrosion resistance activity for a vehicle and these angles are determined with respect to the facility what is available so that not a single drop is let out inside the car so that it is all thrown outside the bath again. And it is also ensued that every part of the car is under the ED bath and there are different ways.
It is not only the first way what we saw here if you see the complete car will be twisting down so that every part of the car is again put inside the ED bath. See, it takes 360 degree rotation to get a complete contact with the ED bath and it also ensues that there are many holes. Some holes are given just for this purpose to let out the water drain and after this it goes into the next level where the car will get started. This heating chamber is the area where little more droplets are drained out and once it goes out, it will be a dry body and then it goes to the next level of ED coats.
This is another method where the deposition takes place. This is quite similar to what we saw on the first situation. And this area is the primer coating area where after the ED bath, the car comes to this primer region and this primer coating region is the kind of preliminary coating for the car. Say for example, this will be the first level of paint coated and above which the color of the car will be coated. And here it goes through the underbody sealant region. And this is the region what you saw on the benchmarking report.
The more the coating region, the more better the car performs. And sometimes all the spot welding regions are also closed with these sealants and these are all depending upon the budget and the segment of the car. Premium cars, you get all these things and normal cars, you don't get these things. And now the cars are getting painted on all regions and then the inspection will take place like how the paint and how the quality is. And not all paint shops are highly automated. This is Benz, Mercedes Benz paint shop.
So, we find it like a complete paint shop is automated. But other OEMs are like, it will not be completely automated. It will be semi-automatic. Yeah, and the car now comes out from the paint booth. And now it goes to the inspection chamber where each and every character is being inspected. This inspection chamber will have a high lighting so that all mistakes are clearly visible if there is a mistake. And this was the paint process what takes place inside all OEMs. And now I hope it will be easy for you to also give us what underbody coating is, a one pager about what underbody coating is.