← Previous lessonFree lesson 3 of 3 · lesson 3 of 44

Unlock all 44 lessons of AutoCAD Essentials for Mechanical EngineersFull course ₹40,000 · paid

Price & syllabus
Free lesson · 27 min · no payment

Erase, Oops, Line and Circle Commands with Coordinate Entry

A free lesson from Skill-Lync's AutoCAD Essentials for Mechanical Engineers course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Course Preamble Week 1 Part 3”

What will you learn in this free AutoCAD Essentials for Mechanical Engineers lesson?

The instructor shows how to turn on the draw toolbar and use the erase and oops commands. The lesson then draws lines and rectangles with absolute, relative rectangular and relative polar coordinates, and ends with the circle command and its centre, two-point, three-point and tangent-tangent-radius options.

  • Erase and oops to delete and restore objects
  • Absolute coordinates like 5,5 for a first point
  • Relative entry: @x,y and polar @distance<angle
  • Circle options: 2P, 3P and tangent-tangent-radius

What comes after lesson 3?

Later in Skill-Lync's AutoCAD Essentials for Mechanical Engineers course (paid): lesson 4, Course Preamble Week 1 Part 4; lesson 5, Which way? Lay of the land Week 2 Part 1; lesson 6, Which way? Lay of the land Week 2 Part 2. The full course has 44 lessons (20 h 30 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

So the next point is also called the toolbar. So right now the toolbar is not visible. So if you want to do it, go to tool and then click on toolbars. You have different options that you can select from. In AutoCAD, let us select one tool that I need to work frequently on. Let us select this draw toolbar. So here you have all the draw commands available in whatever listed here as a toolbar option so that you can quickly work on. This you can also have as a floating menu so that if you are working on it with a bigger one, a bigger project and if you want to quickly click on the icons then you can use it.

But the recommended practice is you always use the command line to select and draw your drawing. So now let us look into the draw commands that are available to us and let us start first off with line. But before that, we will also look at two features that we are going to look into today. Erase commands and oops command. We already have drawn some good circles here. Let us try out the erase command here. So for that, you type in erase and then click on enter and then you can select the objects that you want to delete. So when clicking on these three objects, you can see that the select objects each and every time one has been incremented. Each and every time one has been incremented. In total, there are three objects and click on enter to execute the command. Now the objects have been deleted. Now if you want to revert this, you have to click in, type in oops, O O P S.

So now it will get back to the command, whatever you have already done with. That is, it will erase or roll back what you have done it earlier. There is a very small difference between this undo and oops command. We will look at it in the next sessions. But this is to start with. But alternatively, if you want to delete, you can also click and drag. Click once and then drag to select the objects. But basically you are using a selection option to last. If you long press your left mouse button, you are using the lasso button.

or if you press on once and then click on the other end again with the left mouse, you are selecting with the fencing option. So now you can alternatively click on delete to delete them. But the background effect is using the erase command to delete it. So this is about the erase and oops command. So now let's look into the line command. So for this course, we will explore only through the command prompt window. But parallel, you can also look into this. The line command is available in the ribbon here in draw tab and also in the draw menu as line.

So coming here. So coming here, you type in L. If you type in L, it will start the line command. So first it is required to specify the first point. And as you could see, there are two windows that are hovering nearby. The first one where it is highlighted for entry and the second one. So basically it mentions the axis what I want to enter. The first one is the x. Let me enter five units of x and if I want to go to the next, I have to click on the tab key and with the tab key, next I'll enter the net command that is 10.

It means that I am fixing the first point with an x axis as 10. It means that I am fixing the first point with an x axis as 5 and y axis as 10. I am clicking on enter now. So now the first point has been fixed. Let me zoom using scroll button. I am zooming out. You can see here on the x side, it has moved for 5 units and in y axis it has moved in 10 units. So this is your first point. so now it'll ask for the second point so we have different options so let me pick a point directly so i'm graphically picking a point in here alternatively we could have entered the first point also graphically but let us proceed further so i am picking a random point here so now that first line has been executed this line command does not terminate until you press the x option for exiting or press enter so i've used this command menu to present so if you can click on this up arrow you can see the sequence of commands that you have already executed so this is where you started it you have pressed the button l and that has prompted the line command you have specified the first point numerically and the second point you have specified graphically and to come out of the command you have clicked the x button to exit from the line command so let us do once more let me again click on l so now i'm getting the line so now let me pick on a point graphically here and next point here and then again if you click on enter again it terminates the command so you can either terminate the command by clicking on enter or by pressing x to come out of the line command so now this is basically the line command that you want to go but here let us also look into the coordinate systems and how we can effectively use to work around your drawing so let me delete it so i'll use erase option to delete these two done so let us start a line afresh let us draw a rectangle in different methodologies that we look into so first we'll start off with the coordinate system of absolute that is the x and y axis are going to be defined as an absolute dimension let us click on l line so i have taken my hand off the mouse so we'll do it entirely on the keyboard so the first point let us assume is start from x of 5 and y of 5 so let us type as 5 comma 5 so the first point is plotted the second point for the length of 10 in the x will be 15 comma 5 because the y-axis is not going to change that point is going to remain the same so on the x side we are incrementing by a unit of 10 so 10 plus 5 is 15 and y is going to remain the same so it says 5. so next as we discussed earlier the line command keeps on continuing until we manually terminated so let us continue drawing it so on the y side we are going to increment by 5 because the height is going to be 5. so in x we are going to maintain a same 15 whereas in y we are going to increment by 5 units so from the base of 5 it is 5 plus 5 so it is 10 and again going in the next direction so here again specify your x in absolute so you are coming back by 10 units so from 15 you have to come back to 5 so it is 5 in x and y remains the same as the previous point so 5 comma 10 and you have to close back so entering the original point as 5 comma 5 and then clicking on enter again to terminate it so now let us have a look at the commands that we have already entered say with the line command with the spacing of l we have specified the first point at 5 comma 5 and the next point as 15 comma 5 the next and 15 10 and so on so here you have to see that you have calculated the values and then specified it exactly as it would be drawn on a paper with absolute dimensions so this type of drawing is called as an absolute coordinate system methodology so next is the relative rectangular method to look into that so let us erase this off and start afresh so i am clicking on line command again and specifying the first point as 5 comma 5 so now the second point ideally let me say that i have to go only to 10 units in the x direction so to specify that i will use the command of alpha at the rate of that is shift and pressing 2 so alpha and 10 comma 0 this means i am incrementing along the x axis by 10 units but in y axis i am not incrementing any so you get the same desired effect only this thing here you need not worry about the direction the plus this is always denotes on the Positive side and minus, you know, in the negative side. This is what you have to keep a note on, but you can enter incremental units as and when required and need not worry about computation of the exact coordinate portion the point is going to fit in.

So the next point, let us go. So in X axis, we are not going to increment anything. So it's zero. And in Y axis, we are going to increment by five. So at the rate of five and yeah, sorry. So it should be in the first point. The other rate should always be in the first thing. So at the rate zero comma five. So the next one again at the rate. So now I have to decrement in X by 10 units. So and click entering as minus 10 and Y as no change for zero. And then now coming downwards in Y. So X should be zero.

So at zero comma minus five. So as you have seen, this is quite faster than the absolute coordinate system because you are specifying only the incremental commands and you are using just the positive or the negative signs to specify the direction. So the positive side in the X axis will always go from left to right and in Y axis from bottom to top. If you want to reverse the direction, that is if you want to go from right to left in the pin. So then you have to specify a negative and again from top to bottom, it's again in negative.

So this is the relative rectangular coordinate system. So let us come out as command by clicking on enter. So now let us again expand this window to check again what we have done. So here we have specified L command and specify the first point five five and then use other rate command to enter the X and Y direction in increment. But please note that I have made a mistake here. The alpha, the other rate should always be intimated in the front to indicate the system that I'm going to go in relative rectangular coordinates.

So resuming here, we have specified again at the rate of the incremental in a negative direction to go from right to left and then from top to bottom to complete the rectangle. Okay, so that's it. So let us use the erase command to erase the sections. You can have a note at it here. This is not a single object. It's just separate lines. So that's why when you use an erase command, you have to select each and every line to delete them. So having selected all the four objects, so complete the erase command by clicking on enter or space.

Basically, enter would work anywhere if you are working in this drawing area and if you are working in this, then you can specify space that click on space to come out of the command. Okay. So now let us move on to the third methodology of drawing specifying the coordinate system. So that is called as a relative coordinate system again, but instead of rectangular coordinates, it's called as a polar coordinates. So polar coordinates as in you specify the relative angle to the previous point. So let us demonstrate it.

Let us go into the line command again as L, specifying the first point as 5,5. And now the second point. So the rectangle, there is always an absolute degrees to it. So the next point would come at an angle of 0 degrees. Let us show it. So the start point is again is at the rate of, you click on the incremental X, but rather it's not an incremental X or Y. It's actually an incremental distance. And based on the angle, it will determine in which area it want to go.

So the incremental distance is going to be 10. And you have to specify the angle by clicking on the less than button. That is, you click on shift plus comma. So by clicking on that, you have the relative because at represent the relative coordinate and angle represents the polar. So together it's relative polar. So now we say that it's going to go on the X direction only. That is from left to right. So you specify the angle at 0 and now again the next one. So the incremental distance is going to be 5 and then the angle is going to be in 90 degree.

That is upwards. So you specify as 90. And now again at the rate of, now the distance we require is 10. And now the angle, you have to go from right to left. So it's actually the other side of, so is 180. So going on a polar coordinate system, so its angle is 0, 90, 180 and 270. So we have specified as at the rate of 10, less than 180. Then to close it, the relative distance is 5 and the angle is 270. We will come out of this by pressing space.

Yeah, that's it. So this is the relative polar coordinates. Let us look into the command once more. We are specifying the start point as 5 and 5. And specifying the relative distance as at the rate of. Please keep a note on here. Always the relative carries an alpha at the rate of. And then if you click on the comma, it assumes that you are referring to a relative rectangular system. And if you click on the less than symbol, then the system understands that you want to go to a polar coordinate system.

Enter the decrement. Earlier you have to again specify in the relative rectangular system. Calculate again the incremental distances whether in the X or in the Y. But in polar coordinate, you just have to specify the incremental distance irrespective of the direction. The direction is taken care by the angle. Okay, so this is the relative polar coordinate system. So they also remember the angles are always plotted in the anticlockwise direction. So the base is 0 going anticlockwise 90, 180, 270. So this is how the relative polar coordinate system works.

So this sums up the line command. Next, let's look into the circle command. So let us erase this off. So circle is invoked by the command C. So in circle, there are actually three types of variants. So let me cancel this. Let's look into the types of circle and then come into. So here, you have three categories. So one, you indicate the center and then the radius or the diameter. The second part, you specify either two diametrically opposite points or through three points. So the third method, you specify a circle based on tangent to two objects and then specify the radius.

And the other method is tangent to three objects. You can see different use cases from these examples and how we can replicate them in real life situations. So first, let's start off with the center reader. Each and every command can be selected from the command menu itself. So let us look directly into the command menu only. So let's invoke by pressing the C command, the circle. So now if you read down the command line, you can see the input that is required. So it says, specify the center point for the circle or specify one of the methods.

So let us start off with the first method, that is with the center point, radius of the diameter. So let us specify the center point as 5,5 and now it's prone for the circle. So by default, the command is radius and if you want to alternate to the next one, we have to press in the D. So let us now enter a radius. So let's specify a radius of 1.25 and press on enter, you have your circle. So one more thing, if you hold it over on the circle, you can give an object menu wherein it shows that this command is a circle and this is by this layer of white and so this layer, the indication is 0 and the line type is again by layer.

So everything has been categorized by layer, but this is the rollover object wherein you can get info about the separate object. So now let's look back into this command once more. So we have used invoke the circle command through C and we have specified the center point and specified the radius as 1.25 and we've got the radius. So I have selected it, deleted it. So now let's go back to the other command. So let's go back to circle, specify the radius as same. Now let's click on D, enter D to change the command from radius to diameter.

So now it prompts for the diameter. So if you could notice, each and every time the previous entry point is being taken as same. The earlier prompt was saying that specify the radius of the circle or diameter and in angular bracket it shows as 1.25. That was because the previous entry was 1.25 so AutoCAD assumes that the entry can be the same so it prompts for that. So if you want to use the same dimension you can click on enter to use it and here in diameter when we change it as diameter it just multiplies by 2 and prompts that do you want the circle diameter to be 2.5.

If yes let's press enter and so the same circle has been drawn with that diameter of 2.5. You can see here the diameter is specified as 2.5. Alternatively if you don't want to invoke the previous command but rather enter for yourself go into the dimension command and type in 2.5. You are free to use in whichever command you want. But if you are doing a replicated task you can always click on enter to take in the previous dimension or previous entry. So this sums up the first method of drawing a circle that is by specifying the center point and then specifying either the radius or the diameter.

By default the command is radius. So next moving on to the next part that is the two point circle. So again invoke by circle command by C and then for invoking the two point. So let us enter 2P. So which letters or alphabet should you use is highlighted by the dark blue color listed here. So by typing that you are invoking the shortcut to that command. So now let us create the two point. So now it is asking the end points of the circle diameter. Please keep in note the first command is specifying the center point and then specifying the radius of diameter.

In the second command it is specifying the points on the circle and if you are selecting two points it is the end to end diameter. So let us say the first point of the diameter is 5,5 and the second point let us assume the diameter to be 10. So it would be 10,5. So you could see this is the first point 5,5 and this is 10,5. So based on these two points in extreme diameter it has plotted the circle in the two point method. So going back here you can see invoke by C command and specify as two point.

It is invoking the first end point of the circle's diameter and the second end point of circle's diameter. You can also note that we are always using the keyboard command. But once you have started drawing images and you want to start from one edge to the other in the drawing then you can choose very well. For example if I am drawing a line here and then I want to continue a circle. So let me come out of this and then specify a circle with the center point as here then I could select them.

So this green line we will talk about later. So this snapping points. But see so based on this we can also select graphically. The other way of doing it is again picking the center point or whichever is required. And if suppose if I want to draw a circle with the radius of this line then I can also select this object so that it can draw with this radius. That is based on the selection it can use the same dimension to utilize in this. The other way of doing it is again typing the diameter radius that you want to do.

Sorry we had talked it earlier. So this is one thing. And okay the next part is using the three point methodology. So we will go into the circle point again and selecting the three point by entering 3p. And now so you can select any three points on the screen to select on which one. So based on the direction of the third point the circle is plotted in whichever direction it wants. So the computer computes circle that passes through all the three points. So this is how you plot the three point circle.

So let's look back into this. So you are specifying the 3p command inside the circle menu to invoke this menu. And use the first point, second point and the third point to draw the three point circle. Okay. So now last part of the circle methodology that is using a tangent tangent methodology. So invoke that. Go into the circle command and click on T. So using that tangent is required. So here it's asking for the first object to which the circle should be a tangent. So for this command to work, for the tangent tangent radius, you require a minimum of two objects already drawn in the screen.

And for a tangent tangent tangent command, you require three objects. So as you can't see any object here, it won't take the input reference. You can see the warning here. It says require a tangential object snap and selection of circle arc or line. So let us come out of this command by clicking on escape. So let us draw a line in this way. Two separate lines, some random lines. So now let us invoke the circle command and turn down this command. So now let's select the first object as this line.

So I am selecting this line and this one.

Want the rest of AutoCAD Essentials for Mechanical Engineers?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full AutoCAD Essentials for Mechanical Engineers course

The remaining 41 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full AutoCAD Essentials for Mechanical Engineers course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.