Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course by Skill-LyncFree · 3 lessons · no payment

Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads: 3 free lessons

Three free lessons from Skill-Lync's Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course. They cover how seismic design differs from wind design, why ductility matters, lessons from past earthquake failures, and the serviceability and ultimate limit states with the properties of earthquake-resistant buildings.

Last updated 16 Nov 2026 · 3 free lessons (56 min) · full course: 67 lessons (31 h 48 min), paid · ₹40,000

Lesson 1 of Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads: Seismic vs Wind Design, Ductility and Structural BasicsFree lesson 1 · 15 minSeismic vs Wind Design, Ductility and Structural Basics

What will you learn in the free Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads lessons?

  • Why seismic design allows inelastic response
  • Ductility and where plastic hinges should form
  • Soft storey, short column and joint failures
  • Serviceability and ultimate limit states

Free lessons you can watch now

  1. Free lesson 1: Seismic vs Wind Design, Ductility and Structural BasicsLesson 1 · 15 minSeismic vs Wind Design, Ductility and Structural BasicsThe instructor outlines the course scope and the six steps a structural engineer follows, from identifying loads to checking slenderness. He then contrasts earthquake and wind loading, and explains why buildings are designed for a fraction of elastic force and must therefore be ductile.
  2. Free lesson 2: Lessons From Earthquake Failures and Ductile DesignLesson 2 · 17 minLessons From Earthquake Failures and Ductile DesignThis lesson lists lessons learned from past earthquakes and gives a three-step approach to achieving ductility. It then shows common failures, namely soft storey, column confinement, short column, beam-column joint and liquefaction, and compares ductile and shear behaviour using hysteresis loops.
  3. Free lesson 3: Seismic Limit States and Earthquake-Resistant Building VirtuesLesson 3 · 24 minSeismic Limit States and Earthquake-Resistant Building VirtuesThe instructor defines the serviceability and ultimate limit states and how building importance changes the design earthquake. He then presents the four virtues of earthquake-resistant buildings, discusses structural configuration, and explains ductility demand, force reduction in IS 1893 and capacity design.

Which lessons of Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads are free?

The first 3 lessons are free on Grow by Skill-Lync: 56 min of video from Skill-Lync's Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 64 lessons are listed in the outline below so you can see what each one covers.

How long is the Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course?

The full course has 67 lessons and 31 h 48 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 56 min, so you can finish them in an evening and decide whether to continue.

What comes after the free lessons?

Lesson 4 onwards is in the paid Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course on Skill-Lync, with mentor support and a certificate. For a career in Civil & structural, the Post Graduate Program in High-Rise Building Design & Analysis goes further with industry projects and placement support.

Liked the free lessons?

Get the full course syllabus and fees.

The full Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads course

The remaining 64 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.