← Previous lessonFree lesson 2 of 4 · lesson 2 of 45Next lesson →

Unlock all 45 lessons of Advanced Aerodynamic Simulations using CONVERGEFull course ₹40,000 · paid

Price & syllabus
Free lesson · 5 min · no payment

12-Week Overview of Advanced Aerodynamics with CONVERGE CFD

A free lesson from Skill-Lync's Advanced Aerodynamic Simulations using CONVERGE course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Advanced Aerodynamics using CONVERGE CFD”

What will you learn in this free Advanced Aerodynamic Simulations using CONVERGE lesson?

The instructor outlines the 12-week program week by week: software setup, geometry cleanup in CONVERGE Studio, a throttle body project, a Prandtl-Meyer expansion fan, a NACA airfoil angle-of-attack study, boundary layer theory, an LDA validation project and an FSA vehicle. Meshing needs, y+ and running on a high-performance computing system are also introduced.

  • Week-by-week structure of the program
  • Prerequisites: fluid mechanics, numerical analysis, CFD
  • Throttle body and NACA airfoil projects
  • Validation against LDA experimental data

What comes after lesson 2?

The next free lesson is lesson 3, “Getting Started: Welcome Email, Licence Activation and Cygwin Setup” (25 min). Later in Skill-Lync's Advanced Aerodynamic Simulations using CONVERGE course (paid): lesson 5, Setting Up a Simple Flow Problem in Converge Studio; lesson 6, Case Setup for Laminar Flow Simulation; lesson 7, Setting Up a Case in CONVERGE Version 3.2. The full course has 45 lessons (13 h 9 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hey guys, welcome to our course on Advanced Aerodynamics using Converge CFD. My name is Sarang and I'm going to be the primary instructor for this course. First of all, this is a 12-week long program that is going to basically teach you the fundamentals of aerodynamics and how you can apply the aerodynamic concepts and combine it along with computational fluid dynamic simulations to run really complex simulations. Aerodynamics is a highly technical subject and in order to do well in this field, you need to have good knowledge in fluid mechanics, numerical analysis, computational fluid dynamics, and good knowledge in a software package.

When you complete this course, you will be extremely familiar in setting up external airflow simulations using Converge CFD. You will be able to perform cleanup on complex industry scale geometries. You will be able to understand the various theoretical models that are extremely important from an aerodynamic and an aerospace point of view. And then one of the major outcomes is that you will be able to understand meshing requirements. Meshing with respect to aerodynamic applications can be extremely tricky. You need to understand a lot about turbulence and turbulence models and then apply these key concepts in estimating what should be the grid size near the wall, which is done typically using something called as a Y+.

And finally, you will learn how to run these advanced simulations in a high-performance computing environment. Here, you will be learning a little bit about command line interface. And then you will learn a suite of advanced post-processing techniques. Here is a quick walkthrough of what is covered in each week. Week 1, you will make sure that you are set up for the software. Week 2, you start getting your hands dirty. Start working on simple to medium level complex geometries and how you can clean them up using Convert Studio.

During week 3, you will be performing your first project, which is steady and transient flow analysis using a throttle body. So here, you will be basically obtaining the relationship between pressure drop and mass flow rate in an elbow, which contains a circular throttle. Now, the nice thing here is that the throttle is also moving, which makes the problem very hard. You are also learning key computational fluid dynamic concepts, such as load balancing, scalability, and adaptive mesh refinement. Around week 4, you start learning some important theoretical concepts.

Here, you will learn about numerical discretization, boundary conditions, initial conditions, and also an intro to turbulence modeling. Week 5, you will be setting up a very classic gas dynamic problem called as the Prandtl-Meyer expansion fan problem. This is a very challenging problem because though the geometry is very simple, the boundary condition and getting the solver to converge might be tricky. During week 5, you will learn about appropriate outflow boundary conditions to simulate supersonic flows. And you will understand the importance of the subgrid scale velocity criterion to capture the shock accurately.

Week 6, we will be diving deep into the cut cell cartesian method that Converge employs to create the grid. We will learn about the nuances of adaptive mesh refinement. We will learn about the block level parallelization architecture that Converge provides and we will discuss its merits and demerits. Once we are done with that, we will also be looking into pressure velocity coupling algorithms, which is the backbone of most CFD codes. And during week 6, you will be working on your second major project, which is simulating flow over a Naka airfoil.

So here, you will be performing the effect of angle of attack on an Naka airfoil and you will be capturing the angle of attack at which TAL takes place. During weeks 7 to 9, we will dive deep into fundamental core concepts with respect to laminar and turbulent boundary layers. Here, we will go into detailed derivations of Reynolds decomposition. We will understand how different turbulence models have been created. Primarily, we will focus on viscosity based models and how that leads to a class of turbulence models. So here, we will be deriving several inner variables that are extremely important.

During week 9 to 11, you will be working on a validation project. Once you obtain the results, you will be inserting several line probes along which you will be extracting the velocity profile information. These velocities would then be compared against LDA measurement values, which are nothing but experimental data. And during the final weeks of the course, you will be working on a comprehensive model, which is a formula FSA vehicle. This geometry is quite complex. So you will be cleaning up the model. You will be setting up the virtual wind tunnel.

You will apply and calculate the right boundary conditions. You will run the simulations and then finally post-process the results. Alright, with that, I would like to conclude this video. Thank you. Bye.

Want the rest of Advanced Aerodynamic Simulations using CONVERGE?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Advanced Aerodynamic Simulations using CONVERGE course

The remaining 41 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Advanced Aerodynamic Simulations using CONVERGE course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.