Week 9 - Attachment Feature Creation (Ribs & Screw Boss) - Challenge 1

objective The objective of this project is to model a butterfly valve and apply GD&T to the different parts and assembly of the butterfly valve.  Introduction A Butterfly valve is a quarter-turn rotational motion valve, that is used to stop, regulate, and start a flow. Butterfly valves are easy and fast to…

Design of Backdoor Objective:  To design Back door of car using the given styling  surface. Intruduction:  A door is a hinged part which is used for entry and exit of the vehicles. Back doors are one of the type doors of the vehicle which are located next to the passenger seat which provides access to the…

ROOF DESIGN AIM: To design a roof with all the components like front roof rail, rear roof rail, and bow roofs by following the given master sections and the high-quality surface, considering all the design requirements as per the OEM standards. ROOF : An automobile roof or car top is the portion of an automobile that…

Title: Assembly Workbench in CATIA V5 Objective:  To create part models of the given 2D drawings and then create their respective assemblies in the Assembly Workbench. Also create the drafting of all the generated models.Design Methodology:Part Workbench: we create the part models with the help of the given 2D…

Aim:To Create a Dog house  design with the help of the given diagram. Given class A surface: TOOLING AXIS : In injection molding, the Class A surface is first analyzed to determine the axis or tooling direction that separates the molds. Tooling direction is critical for plastic product design because it determines…

AIM: Assembly Workbench in CATIA V5 Objective: To create part models of the given 2D drawings and then create their respective assemblies in the Assembly Workbench. Also create the drafting of all the generated models. Design Methodology: Draw the 2D sketches in the part design and then converting into the part of all…

Aim:To Create a Pillar design with the help of the master section. GIVEN CLASS A SURFACE:  TOOLING AXIS : In injection molding, the Class A surface is first analyzed to determine the axis or tooling direction that separates the molds. Tooling direction is critical for plastic product design because it determines mold…

AIM: To create Plastic design and attach the Engineering features and generate the Draft Analysis for the given Door Applique Class A model. Tooling Axis:     The component has walls that are perpendicular to the base of the component. Since the natural tooling axis was taken, (i.e) the axis normal to the…

AIM: Create the Dog House for the Door Trim considering the design rules and perform the draft analysis for class A and create the final close body component and perform the draft analysis. DRAFT ANALYSIS:-Draft analysis is required to check if a part has required draft or not.The Draft analysis refers to a Tool that…

DOOR HANDEL: AIM: To Create the Door Handle Component from the given Class-A surface. To Create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle. To Attach B side Features in the component. To perform the Draft analysis on the model.  TOOLING AXIS -        …

BUMPER Object :- Create a tooling axis in proper way for finding better draft analysis from given class A surface. Create draft analysis of class A surface and create class B and class C surface from class A surface. And finally create draft analysis of finished body. Consider the thickness of the component 3…

Aim: To be able to model solid from the given Class a surface, and perform Draft analysis and create Tooling axis. Class A surface with tooling axis. B SURFACE In the case of Class A the surface below is called core and the surface above is called cavity. Class A is an aesthetics surface and class B is an engineering surface.…

AIM :To Create the Core and cavity blocks for the switch bezel component   TOOLING AXIS:   The Tooling Direction is basically the direction that the mold pulls a part. The mold is built in two separate pieces, basically. You have a Cavity side and you have the Core side. The Core pulls apart from the…

Switch Bezel Design Aim :         To create the Switch Bezel plastic component through the given class A surface and create the required Tooling axis and perform the Draft analysis on the model. Objective : First create the required correct Tooling axis and perform the Draft analysis on the given…

MOMENT OF INERTIA: Area moment of inertia also known as second area moment or 2nd moment of area is a property of a two-dimensional plane shape where it shows how its points are dispersed in an arbitrary axis in the cross-sectional plane. This property basically characterizes the deflection of the plane shape under…

DESIGN OF FRONT FENDER: OBJECTIVE: To develop the front fender using Nx cad.As for the  following  design parameters  INTRUDUCTION: fender is a part of the vehicle that frames the wheel . the primary purpose of the fender is to prevent sand , mud , rock etc from being thrown away into the air by rotating…

Objective: Design hood outer panel, inner panel and reinforcements with the given outer hood skin, master section and design parameters. Introduction The hood or bonnet is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment (or trunk on rear-engine and some mid-engine…

AIM: To examine the given fender design to verify if the wheel arch of the fender meets the European Standards     DEFINATION: Fender is the part of a vehicle that surrounds the wheel. Apart from being the exterior aesthetic part of the vehicle, its important function is to prevent debris such as mud, gravel,…

Underbody coating  Automobiles are made of different types of steel materials and alloys it contains 95-98% of iron and      2-5% of alloy by combining of different materials so iron body parts are easily rusted so reducing of iron rusting under body coating is introduced in automobiles. The…

BENCHMARKNG         Definition: Benchmarking is a new product          development process is a structured way of comparing the practices of one companies so that the resultant information can be applied towards improvement. EXPLANATION        Benchmarking…