Week 8-Challenge
Obj:To make the 3 D mesh for the given components and achieve the TET COLLAPSE value in the described quality standard.
Procedure:
Housing:
*Import the geometry of the housing using the import model option.
*Now first take the inner component and start working for creating the mesh by considering the below method.
*Now delete the solid of the component and select the surface and start mesh by using 2D mesh option.
*Select element criteria by choosing the element size option and mesh with trias.
*Now check the quality criteria as described above and deduce them to the leat value by considering all corrective option like edit element,clean up tools etc.
*Now get into the 3D panel and select tetra mesh option and select the element and start for 3 D mesh.
*Later check for the get collapse value as standard mentioned as 0.15 value and correct the failed element by varying the height by using distance option.
*similarly work the other component using the similar method and save the model.
Chassis:
*Import the file using the import option and import the model by selecting the file.
*Now start working on the components as we are aware of several method.
*Clean up the surface manually and delete the unwanted fillets were we have no chance of adjusting elements low length.
*Redo on the surface were we have like teeth delete them and develop a uniform surface through out.
*Now we can go for Quick tetra select the components surfaces and mention the element size.
*As now it starts to cleanup automatically if still we have any unevenness on our component and provide us the 3 D developed elemental component.
*Check for the quality component and reduce the TET COLLAPSE value to maximum and consider to lower the failed elements value.
*Now using this work on the similar symmetrical component measure the distance using translate option duplicate them.
*Reflect these component on to the component and move these elements into the collector using the organize option.
*Similarly work on the other components and achieve the maximum lower value in failing the get collapse value for the elements and save the model.
Tetra:
*Import the file using the import option.
*Now select the solid component and use the volume tetra mesh component.
* Edit the criteria by selecting the tetra edit option specify the element size,get collapse target,min. Element size and max. Element size.
*Select the volume tetra option select the solids and mesh the component.
* Check for the get collapse value work the failed element by distance option by altering the height without effecting the neighboring elements.
*Reduce the max failed elements and acheive for the low vale of elemental failure.
* Save the model.
Results:
*Achieve the 3D Elemental component using the various methods of 3 D meshing methods and achieve the meshed component elements as mentioned by the described quality index.
https://1drv.ms/u/s!Av1WlNmjfvAwgi2KNCRmIqJDGvlH?e=cOQwja
NOTE:Images are seperately in the link please refer for it.