Connectors between the entities

Obj:To establish a connector for the components using the specified mentioned connector under described conditions.

Procedure:
*Import the component file using import geometry option from the hyper mesh.
*Mesh the component by selecting the auto mesh from 2 D mesh option.
*Form the surfaces free from unevenness and make fine mesh on the components.
*Establish the Seam-Quad (angled+capped+L) connector between Right_Rail_2 & Front_truss_1 by selecting the nodes on the two surface elements and confirm the realization of the connector.
*Create the Quad elements connector between Left_Rail_2 & Front_truss_1 and confirm the realization.
*Create the Spot weld with 3 Layers and 5 mm Diameter connector between Front_truss_2, Front_truss_1 & Right_Rail_1 and confirm the realization.
* Create the Hexa (Adhesive) connector between Front_truss_2, Front_truss_1 & Left_Rail_1 and confirm the realization.
*Create the Bolt Connector between Rear_truss_2 & Right_Rail_2 and confirm the realization.
*Create the Bolt Connector between Rear_truss_2 & Left_Rail_2 and confirm the realization.
*Create the Spot-weld with Rigid Elements connector between Right_Rail_1 & Right_Rail_2 and confirm the realization.
*Create the Spot-weld with Spring Elements connector between Left_Rail_1 & Left_Rail_2 and confirm the realization.

*Create penta mig and rbe2 connector between ideal entities confront truss plate and front truss
*If any unrealized connectors formed goto tool bar-hyper mesh-connectors and select the connector and reralize them.
*If still issue with created connector change of node selection or remeshing will support to form the connector and realize them.

• Result:
  Creating the connector between the entities under the described criteria of the connector specifications.
• Realizing of the connector can be helful for the determining of the quality

https://1drv.ms/u/s!Av1WlNmjfvAwghKQgjVZD6mrcOBV?e=0252Vg