Week 6 - Creating connection for Rear door
Here iam attachimg the model of ANSA
https://drive.google.com/file/d/1Dlmpwl1apTLB1oC4laIFGA36Mn9vsYM0/view?usp=sharing
EXPLAINATION
AIM
Here the aim is to give the possible connections in the given incomplete model. use all the connections shown in the video
PROCEDURE
1. Here the given model is checked widely. then the PID for the FE was to be generated.
2. After generating the PID connections has to be given the possible connection is to be given to the part.
3. First the bolted Connection is to be given for the three parts. the bolt connection can be generated by first giving a point then the point has been Changed into 3D point. Then the changed point had been converted into the bolted connection by the connection manager.
4. For the spot weld also first the 3D point is to be generated and then it is converted into a spot weld connection . After conversion the connection manager is to be opened to realize the connection the p1, p2, p3, p4 was to be selected, then the RB3 hexa connection has to be given for all spot welds then the degree of freedom has to be arrested in all directions and then the PID for the spot weld has to be created and last the connection would be realized.
5. For the seam weld the same as spot weld we have to do the process but here we have to select the curve and the curve has to be given as seam line and then the connection would be realized through connection manager in the connection manager for the seam weld that would be the weld over lap ID.
6. For the Rest of all connections i had been given the cluster RB2 connection. The two node RB2 connection was given where the door mount presents. The degree of freedom has to be relesed in z rotational direction to open the door.
7. In the window glass area the bush connection has to be given. Here the Feature to curve option is to done for creating the curve. then the curve is converted into spot line After that in connection manager the bush has been deployed between the glass and the door. Glass bottom area has been connected in both the end other end it could be connexted in only inside
8. The same method has to be followed to the small mirror
CONCLUSION
The given model has been connected one with eachother to all parts.