Week - 4

1)Washing Machine working principle:A washing machine by spinning at 800-1600 rpm helps soap & dirt with it to leave the surface of the cloth via centrifugal force & into outlet pipes hence utilizing centrifugation to both clean & partially dry the clothes loaded in it.

Soaking:It is used to dip cloths in detergent water to remove dirt from cloths.In this function select soak from panel and soak the cloth for as required time like 6mins.

Washing:During wash cycle, a large plastic agitator turn on around ,moving your cloths through the water.

Rinsing:The dirty ,soapy water is drained,washing machine is refilled & cloths are rewashed in clean water.

Dryer:It work pushing warm dry air through wet washing to extract moisture ,then cooling the now humid air in a heat exchanger to condense the moisture .

Input used here as constant.

State flow attached.

2)Gear shift logic:

A gear shift mechanism for a manual transmission includes a shaft axially movable for selecting shift planes & rotatable for engaging the gaers defining the shift planes

Input used here as Slide gain & constant Simulink block.

State flow attached