Week 4.1: Project Steady state simulation of flow over a throttle body
AIM: Run Steady state simulation on Throttle Valve.
INTRODUCTION:
here in this case a Pipe is of C in shape,and the Throttle is off in a same place...
THEORY:
here in this case the Throttle Valve isnot Moving,and is on stationary place..
Generally the Valves are used to Control flow of Fluid.
but here there is no Rotation in Valve,hence the Fluid can easily flow with a Valve too. but here that is not our Concern, our concern is to Simulate the Fluid (ie Air) in the C bent Pipe..
EXPERIMENT:
a> Base Case Setup
b> Average Mass Flow rate
c> Inlet Pressure
d> Outlet Pressure
e> Inlet Velocity
f> Outlet Velocity
g> Meshing Images
OUTPUT:
https://drive.google.com/drive/folders/1AhvLPbGeREDkLIlhc_5vqbI4boq89O0Q?usp=sharing
CONCLUSION:
Steady Flow Test on Throttle Valve is simulated.