Week 11 - Project - A pillar Design with Master Section
AIM:
*To create a part with required engineering features [dog house].
TOOLING AXIS
* First exracting the two line.
*Now create a point between two lines.
*Using a line command in bisecting method .
*To create line that is our tooling axis.
CREATING A SOLID PART
CLASS A
CLASS B
Class a should offseted in 2.5 mm.
offseted surface create some patches.
using a boundry ,sweep, join and extrapolute command to solve the patches.
CLASS C
To creating a class c surface using a calss a.
using sweap command to create class c.
the sweap command used to a draft direction and with reference surface.
FINAL TRIM
the final trim should be created in joinng of class a and c.
class b and joined class a and c should trimmed .
the final getted.
SOLID PART
*To insert a body.
*goto the part design.
*using the closed commad to create a solid part .
DRAFT ANALYSIS
To using the draft analysis in analysis command .
draft analysis important to plastic design .
the draft is identifing a part angels in component.
DRAFT ANALYSIS ON CLASS A
DRAFT ANALYSIS ON FINAL PART
DRAFT ANALYSIS SIDE CORE AXIS
DOG HOUSE CREATION
First insert a geometrical set for dog house.
now draw a sketch using a positioned sketch.
create a line in two side 10mm and join to a arc in r11.
the sketch should be extrude to 28 mm.
to draw the drwaing mentoined in question.
using a thicknes method to thick part in 2mm.
to assemble in solid part.
now the solid part with dog house shoud be getted.
FINAL DRAFT ANALYSIS