Week 11 - Final project

BUTTERFLY VLAVE    Project Objectives : Select Application (water, Gas, Chemical) of valve,  Specify Pressure , Temperature & Enviornment conditions.Chose the in which Pipe size to fit butterfly valve, select material & apply properties.Create 3d Model of Components individually of Valve.Assemble…

                                                                           BACK DOOR AIM :-       To Develop the CAR BACK DOOR wtih reference of give CLASS A  Surface as per OEM standard in CATIA. INTRODUCTION : -         Back door is also called as tailgate. Back door in a car gives the access to luggage area and few…

                                            ROOF DESIGN AIM:        To be able to Design & Develop Car Roof given surface with its components by following the master section…

                                         FENDER DESIGN AIM :           To Delolop given Fender design various mounting points on the fender, according to the design parameters. OBJECTIVE…

                                             FENDER & WHEEL ARCH AIM :-          To Determine the Distance between Wheel Arch and Fener Outer Atch in the European standards. …

                                                    SECTION MODULUS Aim        To calculate the section modulus of the previously designed hood for analyzing its…

                                   HOOD        In the automobile Hood or Bonnet pay very major role. The Hood is opening body panel that cover engine Compartment in the front engine vehicle. It consist of combination…

                                                           UNDE BODY COATING           Underbody coating provides long term protection…

AUTOMOTIVE BENCHMARKING Benchmarking is the process of comparison of similar products on some dimensions of performance Automotive Benchmarking is the process of analyzing the choices of similar products based on the selection factor and deducing it to final conclusion. CASE Mr. D.S. Pughazhyendhii is a married man…

                                                   BACK DOOR WIRING AIM : Create Wiring Harness Routing for given Back Door. Application of all Packaging rules. Apply Protection coverings…

                                                           ENGINE WIRING HARNESS AIM : Create Wiring Harness Routing for given V16 Engine Given. Application of all Packaging…

AIM :    Flatten wiring harness assembly . Place Flatten assemny in Drawing. DESCRIPTION :             Harness Flattening tool enables users to flatten 3D geometric harness data exported from supported MCAD systems. It prepares the flattened harness structure for import…

AIM :           Create a Wiring Harness Assembly Design. Check Bundle Continuity and Generate CAT Part of Wiring Haness. DESCRIPTION :       3D ANNOTATION :                 Annotations can be made to a 3D part through, for example,…

                       WIRING HARNESS ROUTING AIM :       Create Wiring harness Routing in Electrical Work bench referance given Sketch. Create a Multi Branchable Connector to connector. DESCRIPTION :       WIRING HARNESS…

 1. DEVELOP  P-CLAMP AIM :          Define as Electrical Supoort downloaded P-Clamp Cad data in Electrical part Workbench and define required Properties of P-Clamp. DESCRIPTION :      CLIPS & CLAMPS :           Clips & Clamps are…

AIM :        To Download DT06-08SA , Tyco 174357-2 & Tyco 85229-1 from given link. Define Electrical part downloaded Parts.   DESCRIPTION :         CONNECTORS :            Connectors are parts or devices used for electrically connecting or disconnecting circuits etc. They can connect and disconnect by hands or with simple…

                                                                                                                                    DOOR  TRIM  AIM : -             To Create   SIDE DOOR TRIM given CLASS A SURFACES and Using Master sections and Engineering Features of Plastic part,  Perform Draft analysis of ecah part.…

DRAWING-1  QUICK RETURN MECHNISM :       ASSEMBLY DRAWING                  TREE STRUCTURE              PART-1        3D PART             TREE STRUCTURE   …

 A-PILLAR :-           AIM :                1. To be able to develop A-PILLAR  given Class a Surface and add B-side feature Dog House using master sections.              2. Draw a Propar Main axis and…

DOOR TRIM LOWER :            AIM :                    To be able Create a Part Body  Door trim lower given class a surface. Draw B side features of Locators and Heat Staks on the  Door Trim. OEJECTIVES :       …

DOOR TRIM :      AIM :            To be able to create Door Trim Part using the surface modeling. To perform the Draft Analysis on Part and Dog house.    DESCRIPTION :                 ATTACHMENT  FEATURE:…

 Attachment Feature Creation (Ribs & Screw Boss)   AIM:         To be able to  Create the Door Handle Component from the given Class-A surface.Create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle. to ctreate a Rib and Screw boss.   DESCRPTION:…

SWITCH BEZEL  AIM:       To be able to  create a switch bezel from the given A-class surface by considering a thickness of 2.5 mm and also creating Core and Cavity blocks for it. PROCEDURE: A class surface :       Check open boundaries are in the Switch Bezel give Class A Surface.…

BUMPER    AIM : -              To be able to Create Solid Model body  and Draft Angel Analysis given CLASS A SURFACE.      DESCRIPTION : -              Bumper is Part in Vehicle to Protect and reduce the Damage…

COIN HOLDER AIM : -         To be able to create a coin holder plastic component by closed method with reference to the class A surface and do the draft analysis for the component. PROCEDURE : -    1. CLASS A SURFACE : -                   …

SWITCH BEZEL           DRAFTING ANALYSIS                    TREE ATRUCTURE                                              …

BASE BRACKET          DRAFT ANALYSIS                             SURFACE A                               SURFACE B          …