Week 1- Mixing Tee

Aim: The aim of this report is to derive fourth-order approximations for the second-order derivative using central difference, skewed right-sided difference, and skewed left-sided difference. Additionally, the MATLAB code for these approximations will be provided. The report will also verify that the skewed schemes are…

Report for C-D Nozzle: AIM:To do the CFD Analysis for finding the variation of Mach number across the domain and at what distance from the inlet does the flow become supersonic in Convergent Divergent nozzle. HARDWARE REQUIRED:Desktop, Keyboard, Mouse and CPU. SOFTWARE REQUIRED:ANsys-Fluent v2022/R2 THEORY/DESCRIPTION:…

REPORT FOR CHALLENGE-5 Aim : To simulate and visualize the Rayleigh Taylor instability while interacting one fluid with another for the two cases of different mesh cases. Software Required : Ansys Workbench – Fluid Flow vR2-2022 Hardware Required : Desktop, Keyboard, Mouse, CPU. Theory: Rayleigh–Taylor instability (or…

REPORT FOR CHALLENGE-9 Aim :  To Perform a parametric study on the gate valve simulation by setting the opening from 10 % to 80% for to find the mass flow rate vatiation at outlet. Software Required : Ansys Workbench – Fluid Flow vR2-2022 Hardware Required : Desktop, Keyboard, Mouse, CPU. Theory:…

REPORT FOR CHALLENGE-8 Aim :  To Perform analysis on cyclone separator using Ansys Fluent software by varying the particle diameter from 1 μm to 5 μm and calculate the separation efficiency in each case. Discuss the results. [Use the velocity as 3m/sec.] Software Required : Ansys Workbench –…

REPORT FOR CHALLENGE-6: Aim : To perform the steady-state conjugate heat transfer analysis on a garphic Card for to find the convective heat transfer, maximum and average temperatures due to the fluid passing externally over the graphic card with the velocities of 1, 3 and 5m/s undar the ambient temperature conditions…

REPORT FOR CHALLENGE-4 Aim : To perform the Conjugate heat transfer analysis on a exhaust port for to find the convective heat transfer of the internal fluid for the any two cases of different no.of elements and compare the analytical results with the theoretical results. Software Required : Ansys Workbench – Fluid Flow…

REPORT FOR CHALLENGE-3 Aim : For Lift and Drag coefficient accuracy comparision for the different element sizes after CFD analysis over a Ahmed body, split the given body to symmetry and simulate the flow over the body and calculate the Lift and Drag Coefficients for a given problem using workbench-fluent under steady…

REPORT FOR CHALLENGE-2 Aim : To Simulate the flow over the cylinder and calculate the Strouhal Number for a given problem using workbench-fluent under steady and unsteady case for Re= 100. And also calculate the coefficient of drag and lift over a cylinder for Reynolds number 10,100,1000,10000 & 100000 under steady…

Answer for this question is presrnt in the given attachment.

Aim:To check and solve all geometrical errors and perform meshing for a given CyberTruck model using the ANSA software. Hardware Required:Desktop,Mouse,Keyboard,CPU. Software Required:ANSA v23.0.1x64bit software. Theory/Description: ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary…

Aim:To check the geometrical errors and perform the surface wrap to the given 3 models after merged. Hardware Required:Monitor,Keyboard,Mouse and CPU. Software Required: ANSA v23.0.0 x64bit. Theory/Description: ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary functionality for…

Aim:To check and solve all geometrical errors and perform meshing with the given Target length and element Quality criteria for a given BMW model using the ANSA software. Hardware Required:Desktop,Mouse,Keyboard,CPU. Software Required:ANSA v23.0.1x64bit software. Theory/Description: ANSA is an advanced multidisciplinary…

Aim:To perform the surface mesh and volumetric mesh to the given turbochrger model by using ANSA software. Hardware Required:Desktop,Mouse,Keyboard,CPU. Software Required:ANSA v23.0.1x64bit software. Theory/Description: ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary functionality…

Aim:To check the geometrical errors and perform the topological cleanup and also meshing the given model by setting the three different given target lengths such as 1mm,3mm and 5mm. Hardware Required:Monitor,Keyboard,Mouse and CPU. Software Required: ANSA v23.0.0 x64bit. Description:ANSA is a computer-aided engineering…