Week 1:- Introduction to BiW and Fixtures Challenge

                                            DOOR APPLIQUE DESIGN WITH ENGINEERING FEATURES AIM: To create a door applique design from the given class A surface and to create engineering features to fit the component…

                                                                   BOSS AND DOG HOUSE DESIGN INTRODUCTION: Boss features are commonly found in injection…

DESIGN OF RIBS AIM: To create the rib for the centre console coin holder considering the design rules.INTRODUCTION: Plastic parts design is a very complex process and it requires the involvement of many factors like functional requirements, process constraints, material selection and assembly or structural issues.…

                                    DESIGN OF CORE & CAVITY FOR SWITCH BEZEL   OBJECTIVE: To design a mould cavity for switch bezel and conduct the analysis in Catia V5. INTRODUCTION: Plastic moulding is the process…

                                                                           DESIGN OF COIN HOLDER AIM: To create the coin holder plastic…

                                                                           DESIGN OF COIN HOLDER AIM: To create the coin holder plastic…

                                                                                 DOOR ARM REST AIM: To create a door…

                       DESIGN OF CLASS A, CLASS B AND CLASS C SURFACE OF SWITCH BEZEL USING CATIA V5 AIM: The aim of this project is to develop the product design of the switch bezel with the help of the class A surface following the OEM standards. INTRODUCTION:…

                                     DRAFT ANALYSIS AND PLASTIC MODELING OF BASE BRACKET DESIGN AIM: To create the base bracket plastic component through the given Class-A surface and at the end performing the draft analysis…

                                                            DRAFT ANALYSIS ON A FAN COVER Objective: Main objective is to perform draft analysis to check if the part has…

Hood Design Introduction: Bonnet is an important component of the front portion of the car which is used for many purposes. Bonnet is used to decorate front portion of the car and to add luxurious look. It is made aerodynamic in shape to reduce air effect. Generally, it is used to cover car engine, radiator and many other…

Design of Hood Introduction: Bonnet is an important component of the front portion of the car which is used for many purposes. Bonnet is used to decorate front portion of the car and to add luxurious look. It is made aerodynamic in shape to reduce air effect. Generally, it is used to cover car engine, radiator and many…

FENDER DESIGN Objective: In this project we will design the fender drip area, sill mount area, bumper mount region, A pillar mount and baffle mount. Fender: Fenders typically form an arch made either of plastic or metal on the side of the vehicle body, around each of the wheel cut outs. Its primary purpose is…

SECTION MODULUS OF THE HOOD Objective: To find the section modulus of the hood and optimisation to improve the overall section modulus. Section Modulus: The section modulus (S) is geometric property of the cross section used for designing beams and flexural members. It does not represent anything physically. Formula of…

Design of Roof INTRODUCTION:  The roof is an essential part of a vehicle which plays an indispensable role in providing effective protection for you and those who drive with you from heavy snow, harsh rain, strong wind, harmful UV rays, etc. As many other automotive body panels, the roof is subjected to environmental…

ASSEMBLING AND RENDERING OF YACHT Introduction: Yacht, a sail- or power-driven vessel, usually light and comparatively small, used for racing or for recreation. In recreation, the term applies to very large craft, originally powered by sail and later by steam or internal-combustion engine Objective: To design, Assembling…

 DESIGN OF TAILGATE OBJECTIVE: The objective of this challenge is to design BIW tailgate(backdoor) of passenger car through using NX-Cad. The report constitutes about positioning of Latch and Stricker, Wiper motor. Tail light mounting, Gas stay Reinforcements with suitable emboss definitions and Hemming flanges. BACKDOOR:…

 Design & Modelling of American chopper using SOLIDWORKS Introduction: Choppers bikes are motorcycles featured on the television series of American Chopper for a specific corporate or celebrity customer. The function of motorcycle usually takes a backseat to the presentation of the theme, and…

  TITLE: Sheet Metal Casing Design using siemens NX. OBJECTIVE: To learn Sheet metal design process and to design a sheet metal casing in parametric CAD software Siemens NX following industrial work flow. INTRODUCTION: Sheet metal is a metal with a small thickness ranging from 0.5-6mm which is made thin and flat by…

  TITLE: Sheet Metal Box Assembly Design using Siemens NX. OBJECTIVE: To learn the sheet metal design process and to design a sheet metal box assembly in parametric Cad software Siemens NX following industrial work flow. INTRODUCTION: Sheet Metal is a metal with small thickness ranging from 0.5 – 6MM which is…

  Rendering: Rendering is the process of creating realistic images of the photo realistic model with the environment. Rendering can be done in two ways they are: Photoview 360 Solidworks visualize. The following procedure is used to create a Rendering in photoview 360 for American chopper: Open assembly chopper section.…

  ASSEMBLING AND RENDERING OF YACHT Introduction: Yacht, a sail- or power-driven vessel, usually light and comparatively small, used for racing or for recreation. In recreation, the term applies to very large craft, originally powered by sail and later by steam or internal-combustion engines.      …

1Q) What is design methodology? Ans: Design Methodology: Design methodology is basically the stages or steps to be followed while design a product. We will get confirmation from customer and certain inputs from him and we will proceed further for designing and then after completion of project we will give some technical…

1Q) What is the process of project execution activity? Ans: PROCESS OF PROJECT EXECUTION ACTIVITY:                                                                …

1 What is BIW & define its parts? Ans: BIW stands for Body in White. BIW is an assemblage of all welded sheet metal panels as before going for priming and painting. BIW refer to the welded sheet metal structure to which other component will be married i.e., engine, chassis, exterior and interior trim. Body in white…

TITLE: Design of sheet metal bracket. OBJECTIVE: The objective of this project is to design a Sheet metal Bracket using Siemens NX Sheet metal workbench. INTRODUCTION: A bracket is any intermediate component for fixing one part to another, usually larger part. Which makes a bracket is that it is intermediate between the…

TITLE: SHEET METAL BRACKET DESIGN USING NX CAD OBJECTIVE: In this project we are going to design a Bracket in NX using Sheet Metal application. INTRODUCTION: Sheet metal refers to metal that has a high surface area to volume ratio. Sheet metal work stock, used for sheet metal processes is usually formed by rolling and…

TITLE: Odd shaped enclosure using NX CAD OBJECTIVE: To design sheet metal part for odd shapes as per the workflow procedure by using NX-CAD software with suitable commands to achieve the final product as per the inputs. INTRODUCTION: NX-CAD is one of the powerful design tools designed by Siemens to design various products…