Week 1 Challenge
WEEK 1 CHALLENGE
1. The full form of OEM is original equipment manufacturing.
2. Most automobile designers work in team with other designers or engineers. The designer will make basic sketches of the automobile using computer aided drafting and will then produce more detaileed 3-D images
3. MRF, apollo,bridgestone, CEAT tyres. The y manufacturing the yres for all type of vehicles like passenger, two wheeler etc..
4. The 1st car made in 1769
5. rear-facing seat is used in the 1st car.
6. 3D coordinate reference sysyems.A geographic three-dimensional coordinate referance system is based on longitude and latitude,plus ellipsodal heidht.
7. Areferance is useful and convenent way to reference several worksheets that follow the same pattern and cells on each worksheet contain the same type of data,such as whenyou consolidate budget from different departments in your organization.
8. X-Plane text files with 3-line headers. Each command then takes one line, with parameters separated by spaces. A vector contains one or more subtypes and uses one or more textures. Each road subtype must use only one texture.X positive forward; origin at the front axle position.
9. A zero-premium plan is a Medicare Advantage plan that has no monthly premium. In other words, you don’t pay anything to the insurance company each month for your coverage. That’s in comparison with the average Medicare Advantage premium of month in 2020.
10. Definition of point of origin : the place where something comes from : the place where something originates The package's point of origin was somewhere in the U.S. the point of origin of the fire that burned the building down Learn More About point of origin.
11. P-point
12. Grid lines are the horizontal and vertical lines which divide the grid. Each grid line has a referencing number, starting from the outer-most border of the grid container.
Gridlines help you while you’re working in a spreadsheet; while borders help you highlight important information for people to see. Gridlines appear automatically showing you how the data is organized into rows and columns; while borders need to be added if you want to highlight certain cells.
13. yes
14. Body Position Posture is defined as the position of the body at one point in time and is influenced by each of the joints of the body.
15. They become driving comfortable for driver (occupant location)
16. This gets into the rule of what a centerline actually is. A centerline not only represents the center of a feature it also represents a location and orientation (in GD&T specifically), or a basic dimension of zero between this axis and this axis.
17. Longitudinal axis of the vehicle that divides it into two hawes.
18.positive side of the Z direction in origin
19. positive side of the Y direction in an origin
20. left hand driver and right hand driver.
21.left side of the car.
22. positive
23.left side of the car
24.not againent the door
25.left side
26. left side
27.center line
28.inboard and out board
29.fore
30.lfT
31.seat fore and AFT movement
32.france
33.germaney
34.italy
35.engine types body types
36.britesh,angullolia,USA
37. indai,pakisthan,bhangladesh.
1.eye ellipse combine the words eyes and ellips represesnts the both the drivers interior and exterior visibility environment
3.E-points are two points that represents the left right eye of the driver
4. The p-point represents the check pivot point the P point is the point around which the driven neck turns horizontal to the left and right.
5.The ellipse that have allows specific sight ranges for vehicle drivers is federally regullated and must be met.
6. 98mm
7.System-wide Genetic Resources Programme
8.the H-point is the 2d and 3D devices used to define the measure vehicle seating accomoditating the 2d device is called the oscar template and the 3D divice is called the oscar template.
9.TL4 SgRP to foremost - highest design H-point 14.2.5 33 TL3 SgRP to foremost - lowest design H-point 14.2.3 33 TH3 SgRP to foremost - lowest design H-point 14.2.4 33 TH6 SgRP to rearmost design H-point 14.2.10 33 TL6 SgRP to rearmost design H-point 14.2.9 33 TH5 SgRP to rearmost - highest design H-point 14.2.8 33 TL5.
10.The heel's point is usually under the middle of the heel instead of the back, as with stiletto points. This is due to the inward curve of the heel. The lower heel also translates to less of a balancing act, which makes them more suitable for walking or dancing the night away at a prom or ball.
11.The oscar is the 2d and 3D devices used to define the measure vehicle seating accomoditating the 2d device is called the oscar template and the 3D divice is called the oscar template.
15. 2 types 2D and 3D device .
16.226lbs
17.The seat referance point is the unique design poi t that establish the rear most normal design driving are riding position of each designated seating position
1.the function ofthe seat is
support the occupant
position the occupant
provide comfort for the occupant
protect the occupant
2.the support the occupant is the most basic function of the seat system .Improper supporrt will adversly affect the positio comfort and safety of the occuant
3.The position positon of the occupant is the extreamly important to safe vehicle operation there are three key elements that to occupant
1.hand arm and leg room
2.field of vision
3.driver proximity of the vehicle
4.indentation load deflection
The load is deflected to compre.ss th eseat pad to 50% of its original indicates the firmness of the seat