Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

Question 1. 1. Write the steps involved to upload a .std file through web mail? Answer:- Open the Staad pro software and locate the share option in the main screen. After clicking on the share option just select the send mail option. Now select desired file tha you want to send and click on send mail.      …

Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork      AIM  Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class  Procedure  …

 Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo    AIM Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.  Procedure     First open REVIT and go to manage tab and open Dynamo.…

Creating Architectural and Structural model with 3D rendering using REVIT   AIM  1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School…

 AIM 3D Creation of Ceiling, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT    AIM  Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls…

AIM Creating a 3D rendered model for a Residential Building in AutoCad   Introduction A 3D model made in AutoCAD. Procedure  First of all draw a  plan and elevation in 2D Now change work space settings from drafting to 3D modeling. Use boundry command to make region. Now extrude region in a specific height.…

AIM Creating 3D Isometric view of various structural elements in AutoCAD   1. Create a 3D Isometric View of the building with plan and elevation given.     2. Create the 3D View of the Building Façade as given in the plan and elevation. Also, see the detail of the window.   3. Create the ismoteric…

AIM Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad   1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing.     2. Create the 3d Model of an Isolated footing as shown in Figure.     3. Create…

AIM Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad.   1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure.…

AIM Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad   Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and…

AIM Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad   1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After…

 AIM Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings   Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural…

 AIM Of THE PROJECT  Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual…

               Project on Concrete Mix Design for various grades of Concrete                                            Project I           …