Aim:         To perform a transient analysis on a piston and cam mechanism model. Objective: to run the analysis with Frictionless contact, Frictional with 0.1 and 0.2 as the frictional contact for a total of 3 cases. Find out the Equivalent Stress, Directional Deformation and Equivalent…

Aim:         To perform sheet metal bending for 3 different materials mentioned with a variation of certain settings is also to be performed in ANSYS-WORKBENCH Objectives: Case 1: Aluminium Alloy 1199, Copper Alloy NL and Magnesium Alloy NL. Find out the Equivalent stress, Equivalent elastic strain…

Aim:         To perform an analysis to simulate the bending of a wire in ANSYS-WORKBENCH. Objective: We will be using Copper Alloy (Non Linear), Aluminium Alloy (Non Linear) and Magnesium Alloy (Non Linear) for the wire alone and we need to find out the Equivalent stress and Equivalent…

Aim:         To simulate the bending of iPhone model as per the given conditions in ANSYS-WORKBENCH. Objective: Case 1: Simulate the model without fatigue life. Case 2: Move the bottom fingers from their defined position to the given position X= 22.5mm & Z= 10mm and obtain…

Aim:         To simulate the rolling operation on a workpiece made of copper. Objective: Increase the length of the workpiece by 60 mm and decrease its size on both sides by 8 mm. Run the simulation for 14 steps and you can give small but random values for the displacement. Ensure that…

Aim:         To perform a transient structural analysis on a double universal joint with a spring in ANSYS-WORKBENCH. Objective: There must be three materials used on the joint with the springs alone and the materials are Structural Steel, Stainless Steel and Titanium alloy. Procedure:…