Project - Analysis of a practical automotive wiring circuit

1. MAJOR ELEMENTS IN THE DIAGRAM-

-GENERATOR

-BATTERY

-STARTER

-DISTRIBUTOR

-JUNCTION BLOCK

-IGNITION COIL

-FUSE

-AMMETER

-GAS TANK

-CURRENT AND VOLTAGE REGULATOR

2.PURPOSE AND WORKING OF THREE ELEMENTS-

(A.)BATTERY-

PURPOSE- PURPOSE OF BATTERY IS TO STORE THE ENERGY AND RELEASE THE ENERGY WHEN REQUIRED.

WORKING- BY THE USE OF INVERTER WHICH WORKS AS AC-DC AND DC-AC BOTH, THE ENERGY COMING FROM THE GRID IN AC FORM CONVERTED BY THE USE OF INVERTER IN DC AND BATTERY IS CHARGED AND THEN WITH THE HELP OF INVERTER AGAIN CONVERTED TO AC AND USED.

(B.)DISTRIBUTOR-

PURPOSE- PURPOSE OF DISTRIBUTOR IS TO DISTRIBUTE THE POWER FROM ONE SOURCE TO MANY SOURCES.

ONE INPUT AND MANY OUTPUTS.

WORKING- IT TAKES POWER FROM A SOURCE AND DISTRIBUTE AMONG THE OTHERS.

(C.)GENERATOR-

PURPOSE- TO GENERATE THE POWER

WORKING- IT TAKES EXTERNAL OUTPUT OR MECHANICAL OUTPUT AND THEN GENERATE THE ELECTRICAL OUTPUT.

3. WE WILL TAKE 15A RATED FUSE FOR 10 A CURRENT BECAUSE FOR FLOWING 10A CURRENT THE FUSE NEED TO BE MORE THEN THAT BUT THE DIFFERENCE BETWEEN THE FUSE SHOULD NOT BE THAT HUGE SO THAT WHEN THE FUSE SHOW IT WORK THE APPLIANCE GOT BURNT.

SO THE FUSE SHOULD BE OF 15A RATING.