Project 2 - V&V SW Analysis II

1.Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c”

Install the LDRA TBRUN and the necessary compilers.

step 1: To start LDRA-TBrun.

step 2: In LDRA page select source--.>single file-->>LDRA_workarea-->>examples-->>C_Testbed_examples-- >>Testrain-->>Testrain.c->open.

step 3: Sequence-->>new-->>give any name XXX and select code coverage-->> then continue next step.

step 4: Select Source-->>run static analysis-->>

step 5: Results-->>test manager report.

The sample report of the testing application.

STEP 1 :- Instal the tool then launch the static code analysis tool. Selecting file testtrain.C to test it . And create the new project or new built.

STEP 2 :- sequence-->>new-> name as SEQUENCE -->> continue.

It has some coding standards and function declaration in interface.Totally there are 5 divisions in the tool.

STEP3 :- Then run static code analysis , once analysis done it will generate the report and examine the report.

Go through the code review report.

STEP 4 :- Results , atlast upload the report to the customers.

2.Perform Integration testing by including all the .C files available in the folder location C:\**\LDRA_workarea\Examples\Toolsuite\Cashregister_6.0\ **

A)Create the test cases manually as well as automatically using TBExtreme and upload the reports.

B)store the test cases as .tcf file. Upload the location image where the .tcf file is stored.

step 1: Click source -->> single file

step 2: Then Examples -->> tool suite -->> source -->> Userinterface-->> Cashregister_6.0

step 3: After that Go to Sequence-->> Click New -->> then give sequence name -->> code coverage -->> click coverge

step 4: Then in file view click the , click right then it will open black box -->>Then Go to Extereme Test => Click Run Tabular Extereme Text

step 5: Atlast click to the Result -->> Test Manager Report got ready

WHITE BOX TESTING:-

step 1: Click source -->> single file -->> user interface c files.

step 2:- After that Go to Sequence-->> Click New-->>then give sequence name -->> code coverage -->> click coverge

step 3:- Then in the File View ,Right Click and set White Box Testing -->>Then Go to Extereme Test => Click Run static -->> White Box Test Report is ready.

step 4:- Atlast click to the Result -->> Test Manager Report got ready .