Project 2 - V&V SW Analysis II
Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.
step 1:start LDRA TBrun.
step 2: from the LDRA select source-single file- C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c (in log view all the files will run).
step 3: create new sequence ( sequence-new-give any name-select code coverage-continue).
step 4: source-run static analysis.
step 5: results-test manager report(there we can see our sequence name and what type of test we did).
LOAD FILE
CREATE SEQUENCE
AFTER CREATING SEQUENCE
STATIC ANALYSIS
TEST MANAGER REPORT
Perform Integration testing by including all the .C files available in the folder location C:\**\LDRA_workarea\Examples\Toolsuite\Cashregister_6.0\ **
step 1:start ldra tbrun
step2: from the ldra page select source-multiple file-select-create set(create a name)-create-system-add the .c files-click ok it ask run tested analysis(no).
step3:configure-analysis configuration options-static options-find/create-examples-c_tbrun examples-again examples-.c files-select.
step4:macros-find/create-examples-c_tbrun_examples-select(finally give apply and ok).
step5:source-run static analysis.
step 6:result-test manager report.
A)Create the test cases manually as well as automatically using TBExtreme and upload the reports.
manually
1.create test cases manually
2.manually regression report
3.manually dynamic coverage
automatically build testcase using tbextreme
1.build test case automatically
2.regression repo