Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear

Que1) Using MATLAB/simulink and  the drive cycle from the attached excel sheet, find-The max heat generation of the battery The SOC of the battery at 2 *104second of the battery operationTimeTime StepBattery Current00:00.40.1-0.963200:00.50.2-0.95200:00.60.3-0.907200:00.70.4-0.963200:00.80.5-1.030400:00.90.6-0.963200:01.00.7-1.030400:01.10.8-1.00800:01.20.9-0.985600:01.31-0.963200:01.41.1-0.918400:01.51.2-0.929600:01.61.3-0.929600:01.71.4-0.929600:01.81.5-0.918400:01.91.6-0.940800:02.01.7-0.89600:02.11.8-0.907200:02.21.9-0.907200:02.32-0.940800:02.42.1-0.929600:02.52.2-0.929600:02.62.3-0.996800:02.72.4-0.996800:02.82.5-0.940800:02.92.6-0.9408Consider…

Que1: Design a battery pack for a car roughly 150 Kw with 120 V. Use 3500 mAh 3.6V nominal NMC chemistry cell. Build a 3S2P battery pack configuration with generic battery block using Matlab/Simulink.       a. Design the battery pack configuration.        b. Draw the BMS…

Project Report: Highway Assistant – Lane Changing Assistant1. Introduction to the FeatureThe Highway Assistant is designed to assist drivers in monotonous driving conditions on highways by providing partial automation of the vehicle’s longitudinal and lateral guidance. It can automatically accelerate, brake, and steer…

Project Title: Development of Traffic Jam Assistant Feature for Advanced Driver Assistance System (ADAS)1. IntroductionThe Traffic Jam Assistant is an essential feature in modern Advanced Driver Assistance Systems (ADAS). It is designed to assist drivers during dense traffic conditions and traffic jams by partially automating…

Project3:  Build an object-oriented library which can be used to track automobile maintenance. There can be different car types such as petrol, diesel, gas, electric etc., This library should be able to support at least three of the car types.  Maintenance tasks include activities like oil change or replace…

Project 2 - Implement the code for controllong the retraction and extension of Airplane's landong Gear Objective: In this project, controlling the retraction and extension of Airplane’s landing gear can be implemented using Finite State Machine (FSM). FSM is the most efficient algorithm which is mathematical…

Project 1 :- Creation of user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) using Linked List.   Objective: The project focuses on implementing mathematical Set Theory interfaces in C programming, enabling users to input two lists of data and obtain…

Project2 - Development of TFT Cluster Speedometer Software Component   1) General Overview: Cluster Instrument receives the signals from other ECU via CAN bus interface. It also receives commands from the driver via steering wheel buttons. The signals are then processed by the Cluster ECU, after which the Cluster…

Project1: Develop the simulink model based on the given discription for below challenge and also create SLDD file amd link the same to the model. Perform the complete V and V workflow for the obtained Model.   1. Wiper Control System Develop Simulink/state flow model for wiper control system based on the given conditions.…

Project: Adaptive Cruise Control (ACC) Aim of the Project:The aim of this project is to develop an Adaptive Cruise Control (ACC) system for passenger cars using MATLAB Simulink. The ACC system will automate speed control and maintain a safe distance from the preceding vehicle, improving driver comfort and reducing the…

Project: Vehicle Direction Determination Aim: Develop a MATLAB Simulink model to determine the direction of a vehicle based on camera input. Description: The system compares the yaw rate of the steering wheel with predefined angular values for left turn, right turn, and straight drive. It also considers input from a camera…