Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

AIM:

• To create a 3 dimensional model of the residential building 
• To create a rendered view of the developed model.
• To use materials and light setting.

Procedure:

• Here in the project we are going to create a 3d model of a residential building.
• This is building after being created, it is rendered.
• The rendering of the model happens after applying materials and light settings.
• First let us see about creating the model.
• To create the model first we need to sketch a architectural 2d drawing of a residential building.
• The created architectural 2d plan of the residential plan is shown below.

• Now, create the elevation of the same by using lines, offset, trim and other necessary tools in AutoCAD.

• Now, we have to create the 3D model of the same.
• For this move to 3D modelling workspace in the settings.
• Now, copy the plan separately.
• Then create different necessary layers like 3D walls, 3D windows etc.
• Now, copy the first floor plan and create the boundary region.
• Then extrude the 3D wall  leaving the space for the windows.

• Now, create the floor for ground floor by drawing a rectangle and then create a region and extrude it downwards at depth of 45mm

• Now, create the windowsand doors.
• For that go to elevation and copy the entire elevation beside it.
• Then in the copied elevation retain the doors and windows.
• Then change the layer to window frame and create a boundary region for the window frame.
• Then subtract the inner portion of the window.

• Hence, window and doors are  created.  

• Hence, windows and doors of the gound floor has been created.
• Similarly, windows and doors of the first floor is also created which given below
• Now, we have to create the floor for the first floor i.e the roof for the ground floor.
• For this go to the plan and choose the 3D floor layer and create a rectangle as per the inner dimension of the wall.
• Now, place the first floor above this.

• Now, place the roof above the first floor.
• This is done in the same way as the one created for ground floor from the plan.
• The next we have to create the parapet above the roof.
• This is also created from the plan.

• The next step is to apply materials.
• This is done through material browser in the visualise panel of the ribbon.

•  The next step is to do the rendering

• After this, rendering process begins.
• The rendered image is obtained as given below:

RESULT

 Successfully completed the 3D rendered image of a two storey building 

PLAN

ELEVATION

3D RENDERED MODEL