Project 2 Adaptive Cruise Control

STUDENT OF EV BATCH 16 ONLINE COURSE 1.Create a MATLAB model of electric car which uses a battery and a DC motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following: Objectives:         1. System level configurations        2.…

Objective: To develop one specific requirement of Traffic Jam Assistant algorithm which would predominantly feature in the IPC algorithm.Please note that the whole Traffic Jam Assistant is a very huge algorithm & only one small part of the logic is implemented here. Idea is to familiarize with concepts of Model Based Development…

AIM Developing Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. Follow all the MBD related processes: Requirement Tagging & Traceability, SLDD creation, Configuration Parameter changes, Model Advisor check & Code Generation. In Configuration Parameters: enable “Support…

AIM : Development of MATLAB Simulink model as per requirement. Tag the requirements to the simulink model; tagging requirement 1 & requirement 2 to their corresponding subsystems is fine. MBD compliant changes, Data Dictionary creation & code generation is added advantage, and that is not scope of this project.…

For a 10 cell series lithium ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. The model in which the simulation is performed is from the matlab base model. Changes are done accordingly to obtain the responses of various…

Mechanical design of battery pack   Battery pack capacity: 18 kWh Cell: ANR26650M1-B  The high voltage battery it is one of the most important component of a battery electric vehicle (BEV). The battery parameters have a significant influence on other components and attributes of the vehicle, like: maximum traction motor…

1.Simulate the test cases from the harness dashboard and write a detailed report on the results We need to run simulation for three different cases fro the harness dashboard. The model was downloaded from the matlab. The model provides the information of BMS and the faults occuring in the battery pack. According to the…

STUDENT OF EV BATCH 16 ONLINE COURSE Objective:Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells. Lithium-Ion batteries falls under the category of rechargeable batteries with high energy and power capabilities.…

 STUDENT OF EV BATCH 16 ONLINE COURSE 1.Search and list out the total weight of various types of aircrafts.  Weight of an aircfraft has a huge role in its performance. Total weight is the maximum take off weight.   Aircraft Empty Weight Max Fuel Weight Max Cargo Weight Max Gross Takeoff Weight Antanov AN-225…

STUDENT OF EV BATCH 16 ONLINE COURSE 1.For a defined driving cycle, calculate the energy required for braking. The command script foe calculating energy is 1)Script was written in the command window. 2)Excel sheet in the name of drivingcycle has been created with 50 values for time and velocity has been saved in the same…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’. B. Comment on the armature current shoot-up from the scope results. C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge model. A.Speed control of a…

STUDENT OF EV BATCH 16 ONLINE COURSE 1. For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. For mass of 500 kg EV_defaults_in file is opened and value has been inserted. Drive cycle has been changed to…

STUDENT OF BATCH 16 ONLINE CLASS 1. Which types of power converter circuits are employed in electric and hybrid electric vehicle?   a) AC/DC converter- At the plug in point. Used in Plug-in Hybrid Electric Vehicles and Plug-in Electric Vehicles. b)DC/DC converter - To chop the voltage levels and connect auxillary…

STUDENT FROM BATCH 16 ONLINE CLASS 1.What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  Mapped model It is a model that is used when pre defined values are required for simulation. And it will be entered in the form of Lookup tables. When there is…

AIM: To implement control logic ofa washing machine using stateflow in simulink. Also satisfy the following conditions. If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time…

1.System-level simulation of all-terrain vehicle. BAJA ATV WITH DASHBOARD MODEL This is a dashboard simulation model for ATV. In this input is given through brake and throttle knobe. Different values are given and velocity,RPM and CVT shaft speed are being observed along with other values. Initial conditions to run the…

1) Simulink model of Doorbell using solenoid block. Simulink model     Components used for the layout is pulse generator, simulink-ps converter, switch, battery,electrical reference, mechanical translational reference, solenoid, ideal translational motion sensor, solver, ps-simulink converter, scope and display.…