Project 1 - Geometric Design Parameter- Prerequisites

Note: I have created the design drawing with data I had with me and not from the attached survey topo due to less input details and time constraint to arrange for O3 session. I request you to kindly review this submitted drawing. 1. Creation of Alignment route:   2. Creation of Existing surface:   3. Plan and…

Design Parameters: Location Road Classification Traffic Volume and Composition Vulnerable Road Users Design Speed and Operating Speed Alignment Controls Design Vehicle Environmental Considerations Access Management Drainage Utility Services Topography   Design elements of the road geometric: Cross section element…

The given reference plan and topo survey data is not matched. I followed the survey data and did the preliminary design things.   1. Imported given survey points data into drawings and created the surface as shown below.      2. Created an alignment usign IRC standard with super elevation calculated.…

1. I have extracted the given data from the survey folder and generated surface successfully as shown below. Created surface from the given triangles drawing and exported it as in landxml format. Imported that landxml file into GDTMRD01.dwg file and generated as surface. Atlast exported surface as data shortcut for future…

1. I have created drawings as per required folder structure.      2. Created ALGNRD01.dwg file and made a new alignment with superelevation assigned. Created data shortcut for future reference.     3. Created CLIPRD01.dwg file and generated view frames assigned with given attached template "PlanSheets.dwt". Created…