Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

Design and Draft a layout of a residential building with the following details:

a. Plot Size: 60’x20’(18.3m x6m)

b. Orientation- Facing East

c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan)

AIM:

To Design and Draft a layout of a residential building with plot size (18.3 m x 6 m)

Procedure:

Commands Used:

• L
• offset
• trim
• Extension
• ADC (design centre )
• line
• Rectangle
• lt (linetype)
• arc
• Text

Procedure:

step 1:

• In the command prompt type Units >Feet
• In the command prompt type limmax >100,100
• In the command prompt type limits >0,0

Step 2:

• The main enterance of my plan is in the east direction
• In the ribbon bar > layers >walls , grids , furnitures ,doors
• In the command prompt type ADC( design centre ) to add the furnitures/components
• In the command prompt type arc to draw the doors
• The architectural plan is done

Step 3 ( to create elevation)

• In the command prompt type L to draft the lines
• In the command prompt type Hatch > solid to give the desired annotations , colour to the elevation
• In the command prompt type adc > for door components

Step 4: (section views )

• using dotted lines the horizontal sections are created
• In the ribbon tab > Hatch ( to annotations for concrete)

Step 5:(structural drawings )

• In the command prompt type l to draw the lines
• In the command prompt type LT(to get the dotted lines ) to get the dotted lines
• In the command prompt type rec of dimensions 1.6x1.6 for columns

• In the command prompt type rec of dimensions 2.6*2.6 for footings
• In the command prompt type line to draft the beams
• final structural drawing is completed

RESULT :

Architectural Drawing (Floor Plan, Elevations, and Sections) and Structural Drawing (Column, Bean, Footing Plan) of residential building has been completed .