Project 1 : CFD Meshing for Tesla Cyber Truck

AIM:

To the CFD meshing for TESLA CYBER TRUCK solve the ansa software.

METHODALOGY:

First open the new file insert the truck model and to check the component of double layer that is removed.

To go check the option to under geometry to verify the single cons error and triple cons error.

There also delete the one side part of truck model.

Then solve the all parts single cons and triple cons error removed. The topo option used to clear one by one remove cons and mostly under option cut, project ,delete, intersect ,extend, paste there are use to clear the cracks and also cons errors.

They all solved error go the check option to under the geometry verified.

Then again check the component all side in put any double layer the uses delete option to removed.

There properties check of all components suits the shell name to convey the PID models.

To the check questions and get all components value note and start the meshing process.

The start to surface meshing to put given the values and the mesh under to option length and spot mesh but their option before set the quality criteria and mesh parameters to values and newly added the quality criteria of skewness and angle shells.

They all parts of component values enter same process do again the again and then solved surface meshing of truck model.

Then change hidden option to solve the OFF errors to all components. To create the tunnel so use to mesh option to under the spacing, new points , offset and calculate the model length, height to calculate value to create the tunnel. Then properties to checks to suits name all side to create new PID models.

Mainly check all meshed then go the volumetric mesh.

Then volumetric mesh to under option the define and check to list option.

The mostly check their option carefully to volumes and thickness.

Then remove the thickness part and the solve the CFD meshing of a truck model.

RESULT:

MESH

SHELL

QUADS: 0

TRIAS: 446168

TOTAL: 446168

VOLUME

TETRA:1520766

TOTAL: 1520766

CONCLUSION:

I conclude the CFD meshing on TESLA CYBER TRUCK model in use the ansa software to solved..