Project 1

What is GD&T? GD&T, short for Geometric Dimensioning and Tolerancing, is a system for defining and communicating design intent and engineering tolerances that help engineers and manufacturers optimally control variations in manufacturing processes. Limitations of Tolerancing Before GD&T Before GD&T, manufacturing…

Objective; To create assemblies of Quick return mechanism and CV joint and to also create a 2D drawing of the given assemblies’ components. Introduction; Assembly Workbench in CATIA is a tool used for creating and managing assemblies of 3D models. It allows users to assemble various parts and components into a single…

ANSWER:  AIM: - Route the Wiring harness on Given Tail Gate and Prepare to flatten the view drawing in CATIA V5. Objective:  Route the Wiring harness on the Given car body and Prepare to flatten the view drawing in CATIA V5 Prepare flattened view drawing in CATIA V5 Apply all packaging rules, and industry best…

ANSWER: Aim- To route the wiring harness of the Engine model, and protective covering, and prepare a flattened view drawing in CATIA V5. Objective- This project aims to route the wiring, and protection covering, prepare a flatten-view drawing for the given V16 engine model, and consider all types of packaging rules and…

ANSWER:       DT06-4S DT06-6S DT06-2S DT06-08SA   We have downloaded the required connectors to perform or create the harness assembly as shown above  We have to define all the mechanical components into the electrical component Here we have defined them as given below Downloading the connector 3D part Creating the required…

ANSWER:                  From the above-provided link, we have downloaded the required connectors to perform or create the harness assembly as shown above  We have to define all the mechanical components into the electrical component Here we have defined them as given below…

ANSWER:                Preparation Of Harness Assembly                 As we are done with the wiring harness component design, it is time to prepare the product assembly for the given harness. Wiring Harness Product Assembly Contains:- The…

ANSWER: Q1. Download the following cad data & define it as Electrical support using the Electrical Part Design Workbench. Define all the necessary properties. P clamp: We have downloaded the P clamp from the above link  process: Create two points one as an entry and another as an exit point. create planes at two…

 ANSWER: Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) From the above-provided link, we have downloaded the part  We have created a bundle connection point for the bundle entry. Bundle connection point:  We have created the Bundle connection point by defining the middle…

ANSWER: How Does Temperature Affect the Safety of Lithium-Ion Batteries? Very low temperatures can produce a reduction in the energy and power capabilities of lithium-ion batteries. High ambient temperatures, however, can contribute to a high internal temperature of the battery — which can also decrease performance and…

ANSWER: What is a Battery Pack? A battery pack is a device that stores electrical energy to provide power to an electrical system, such as an electric vehicle (EV) or an energy storage system (ESS). The energy is stored in cells that are all connected in the battery pack. To provide sufficient power, battery packs require…

ANSWER: INTRODUCTION: Lithium-ion battery packs are the predominant energy storage systems in aircraft, electric vehicles, portable devices, and other equipment requiring a reliable, high-energy-density, low-weight power source. The battery management system (BMS) is responsible for safe operation, performance, and battery…

ANSWER:       Forward Model Approach: the forward modeling approach is also called a cause-effect, engine-to-wheel method.    the direction of calculation is the same as the direction of positive power flow from the engine to the wheel.    this approach is based on the vehicle dynamics…

1. ANSWER:     1. LCO batteries technology and applications: LCO (Lithium cobalt oxide) was invented in the year 1991. Its anode material is LiaC6, the cathode material is LibCoO2 and the carrier is Li+. It is used in various applications, from electronic devices to laptops and phone…

     AIM Compute the fuel economy numbers for the given vehicle (kmpl) on the urban cycle (UDDS) and highway cycle (HWFET). Also, analyze and understand the vehicle operating points in terms of engine speed, torque, transmission speeds, pedal positions, gear, distance traveled, etc. Build a Simulink model…

ANSWER:                    We have built a model just as shown  below  This model is created by using a combination of blocks from electrical, mechanical,& hydraulic domains. This is modeled for controlling a hydraulic system's mechanical load position in…

   ANSWER SCRIPT:          What is a DC Motor?                 A DC motor defined as a class of electrical motors that convert electrical direct current electrical energy into                   …

    1.Identify each of the major elements in the above automotive wiring diagram.       solution; GENERATOR BATTERY DISTRIBUTOR STARATER IGNITION SWITCH BREAKER AMMETER      2.Explain the purpose and working of any three elements briefly.      GENERATOR:    …

project   plot(VVolt,ImAmp,'-ob','MarkerFaceColor','r','linewidth',3); %plotting the graph VV = interp1(VVolt,ImAmp) %using interpolation VVolt=-17.3:0.1:0.9; % definig the data xlabel('voltage'); ylabel('current');                             …