II. Answer in detail

  QUESTION )    Analyze and Design a Boiler shed structure as per IS code in Tekla Structural Designer. Kindly refer to the enclosed plan and elevation given below for modelling. ANS ) AIM: To analyze and design a building Boiler shed structure as per IS code in Tekla Structural Designer. Create a structure…

QUESTION :  Develop general arrangements for the RC office building. Analyze and design the building as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer to the attached plan and elevation. The building is to be designed for dead, live, wind and seismic loading. Report of each member to be generated and extract…

Q1 )   Generate report for the steel building design from challenges 1 – 6 along with the loading summary. ANS 1) AIM : To generate report for the steel building design from challenge 1-6. TOOLS USED : Report. Model report. Show report. PROCEDURE : Open the structure and analyze it.   Now click on…

Q1 )  Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations). ANS 1) AIM : To design the slab and roof foundations of the model and to outline the thought process for designing of the elements. TOOLS USED : Design. Settings.…

Q1)  Based on the analysis design RC column and beam. ANS 1) AIM : To design RC column and beams based on the analysis. TOOLS USED : Review. Check member. Static. PROCEDURE : First we have to open the file in which we have completed the structure.   Next we have to validate the model in search on any errors…

Q1 ) Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly. AIM : To generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly. TOOLS USED : Load. Load cases. Seismic wizard. Seismic load. PROCEDURE…

Q1 ) Calculate dead load in design report based on IS code and apply dead load on the model Finishes of 50mm Slab thickness as per the design Brick wall load Roofing load ANS 1) AIM: To calculate the dead load based on the design and apply it to the structure. TOOLS USED : MS Excel. Loads. Load cases. Dead load. Area.…

Q1) Setup model for RC building design and based on following parameters for cover. ANS 1)   AIM: To set up a model for RC building design and based on the following parameters for cover.   TOOLS USED : Tekla software. File. Settings. Structural Defaults.   PROCEDURE : First, open a new Tekla file for…

  Analyze and design a steel building to 10T CRANE as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer to the attached plan and elevation. Provide bracings and moment connection for lateral stability.  Consider dead, live, equipment, and wind loading. Consider the brick wall loading for 150mm thick and…

1.Summarize your study for the bending moment, shear force and deflection diagrams for the elements of the model. Ans) Bending Moment: It refers to the internal rotational moments that cause a section to bend. In the case of a beam, it can be calculated as the algebraic sum of the moments about the section of…

Q1 )  Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39m/s Terrain category 2 ANS 1 : AIM:   Generate manual wind loading in the design report based IS code as per the following input TOOLS USED : Excel. IS codes. Calculator. PROCEDURE :…

1.Calculate dead load in design report based on IS code and apply dead load on the model Finishes of 50mm Slab as per design Brickwall 150mm thickness Roofing load based on purlin size Ceiling loading 0f 0.3KN per sq m Ans) Aim: To calculate dead load in the design report based on IS code and apply dead load on the model.…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim:  To Exporting the Revit architecture and structure model to the Navisworks Cache file as discussed in…

1) Using Dynamo creates a set of sinusoidal points and create a curve and creates a surface out of the curve. Aim:   To create the set of sinusoidal points, a curve, and a surface out of the curve using dynamo. Tools used:      * Dynamo      * Points      * Curve  …

1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below            a. Using a 3D model create a section box            b. To create similar doors and windows in a floor plan layout          …

1) What are the HVAC systems? Why are they essential in the modeling buildings ans) HVAC stands for heating, ventilation, and air conditioning. This provides heating and cooling to kind of buildings. These systems use fresh air from the outdoors to provide high indoor air quality. The Vin HVAC, or ventilation, is the process…

Create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain: ans) Aim: To create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain Tools Used: collaborate save Procedure: 1)click collaborate 2) click ok to dialog…

1) Select the type of structure you want to build from one of the three below         a. Multi-Unit Residential Apartment         b. Office Buildings         c. school ans) I chose Office Building 2) Assume reasonable assumptions for geographic and location…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project ans) Aim: To open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Tools Used: manage architecture  grid collaborate…

1 Ans) AIM:-  To create a new project (Structural / Architectural / Construction template ) and name the project appropriately. TOOLS REQUIRED:- file toolbar PROCEDURE:- STEP-1:-  to create a structural template file. First, open Autodesk Revit software 2021. Then select new command on left from…

1 ANS) BIM stands for Building information modeling.BIM is used in presenting 3D models.BIM is flexible in usage, in BIM when we make a change in one view all other views automatically change which is not the same as in 2D CAD. CAD models have only one visual representation: highly detailed. BIM models are designed for…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using the floor tool under the architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor level. Align the floor plan with grids created…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level ans) Aim: To proceed from the First Floor Level.Model a Ceiling from the architecture tab above the walls at the first-floor level. Tools used: architecture…