Challenge

Drafting of various geometries using Chamfer, Fillet tool in AutoCad

SSumedh Lokhande28 Jul 2022

DECIMAL DRAWING 1

1)Aim & Intoduction :- Creating a drawing which is kind of rectangular in shape with vertical V notch and two different dia circles but its not in accurate rectangle.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a horizontal line of 3 units.
Then draw another horizontal line of length 2.12 units and rotate it at an angle of 45 degree then we'll get the angle of 135 degree.
Draw a vertical line of length 2.83 units and rotate it at angle 45 degree then we'll get the angle of 90. then draw a horizontal line of 2 unit length and by contuining it attach to the first point.
Now we will go for circles first select ray command then select 1st point draw it in vertically.
And give an offset to that ray line of 1.5 unit after that again select ray command draw it from 1st point but now horizontally.
And give an offset of 1 unit legnth and 2.50 unit length then we'll get 2 point for circle.
Now draw a circle at 1unit of dia. of 1.20 and another circle at 2.5 unit length of dia. of 0.8.
After that give annotation to the lines, circles, angles for representation.

ARCHITECTURAL DRAWING 2

1)Aim & Intoduction :- Drawing a architectural plan which is line plan.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required architectural unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0'-0"
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as Architectural unit style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd as a architectural tick and leader as a closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 0'-1 1/2" text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Aligned with dimesion
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Architectural
Precision -->0'-0"
Decimal seperator --> NONE (This option diabled in architectural)
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a horizontal line of 2'-6" units.
Again from that point draw a vertical line of 3'-0" units. After that we rotate first line which is 2'-6" units at angle of 45 degree and then rotate the second line 3'-0" unit at an angle 45 degree then we'll get the angle of 90 degree.
Now from the end point of second line which is 3'-0" draw a line from that vertically upward 2'-5" units and then continuing it horizontally at a length of 8'-0" after that vertically downward 1'-9" units.
After drawing all these line take separate portion of and ddraw a line horziontally at a length of 2'-10" and rotate it aat an angle 45 degree. And move this line to the end point of 1'-9" units line and attach to it.
Now we have small gap between last line and first line we have to attached them by drawing a horizontal drawing after our drawing is finish.
After that give annotation to the lines by using dimlinear command and for some line using dimaligned command.
And for angular we are going to use dimangular command for representation.

ENGINEERING DRAWING 3

1)Aim & Intoduction :- Drawing a engineering plan which is having a circle.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required engineering unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0'-0"
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as Engineering unit style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 0'-1 1/2" text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Aligned with dimesion
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Architectural
Precision -->0'-0"
Decimal seperator --> NONE (This option diabled in Engineering)
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a horizontal line of 5'-0.1" units.
From the starting point draw a vertical line to the upward direction at a length of 3'-3.0" units and by contituning it draw a horizontal line of 2'-6.5" unit length.
The line which we draw first horizontally that lines end point is free so select the line command and select the end point of the line and draw a vertically upward line at a length 1'-6.0" unit.
As of now we have the two free end points one is horizontal and one is vertical line attached them by using line command, after that we get an angle of 125 degree.
Now select the offset command give an offset of by using second line we draw at a distance of 1'-3.0" units.
Then give offset by using first line which we draw horizontally at a distance a distance 1'-6.0" units these two lines intersecting at point at which is center of the circle.
Select the circle command and draw circle of dia. 1'-6.0" after our drawing is finish.
After that give annotation to the lines by using dimlinear command and dimangular.
And for circle using dimdiameter.

DRAWING 4

1)Aim & Intoduction :- Creating a drawing which is kind of rectangular but its not in accurate rectangle. It is combination of rectangles.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a vertical line of 3.50 units and draw a horizontal line of 3.0 unit length.
By contuining it draw a vertically downward at distance of 0.50 unit and contiuning it horizontally at distance of 2.50 unit length.
Again contiuning the line command this time draw a vertically upward direction at a distance of 2.50 unit and continuing draw a horizontal line to the left direction at distance of 2.00 unit and vertically upward 3.00 unit. Again draw horizontally to the left direction at distance of 2.50 unit now vertically downward to 2.0 unit and attached to the end point of first line.
After that give annotation to the lines ny using dimlinear command.

DRAWING 5

1)Aim & Intoduction :- Creating a drawing in which in rectangle there are five circles with three blocks.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a vertical line of 6.00 units and draw a horizontal line of 11.50 unit length.
Give an offset of vertical line at distance 11.50 unit and horizontal line offset at distance 6.00 unit. Then close the command.
Now we have a rectangle use to offset command again at distnace first by taking vertical line at distance 1.50 unit then at 3.0 unit distance. Now use use line at 3.0 unit to give an offset at distance 2.75 unit then give an offset at a distance of 5.50 unit after that use the line 5.50 unit line to give an offset at distance of 1.50 unit and close the command.
Then use bottom horizontal line to give an offset at distance of 3.0 unit. The line intersecting at points is centre of circles.
The first offset which we give at distance of 1.50 unit the point interseting is the centre of the circle now use the circle command and draw circle of dia. 1 unit and draw anther circle using same dia of 2 unit 2 unit.
Then use mirror command select both the circles and mirror them from center of the rectangle.
Now we have four circles , after that the offset which we given at a distnace of 2.75 unit there is intersecting point is the center of the circle use the circle command an draw a circle dia of 3 unit.
Then trim the lines which are present inside and outside of the circle by using trim command.
After that go the Annotate from toolbar and select the center mark command and use it to mark the center of the circles.
Use the dimlinear command for annotation of the lines and dimcircular command for the circle annotation.

DRAWING 6

1)Aim & Intoduction :- Creating a drawing in which in line and there id elevation of it.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a vertical line of 1.5 unit and copying same line at a distance of 0.5 unit for three times.
Using line command again to draw a horizontal line from the starting point at length of 1.5 unit and use offset command to give an offset by using same horizontal line at a distance of 0.5 unit.
Use trim command to trim the line which are intersecting in between middle of the object.
Then use ray command at bottom point ,middle and at top point horizontally for the projection purpose.
Use line command to draw vertical line at approximate distance then give an by useng same line at distance of 2.0 unit to right side again use offset command and offset it at a distance of 0.5 unit left side vertically from bottom side horizontally at same 0.5 unit in upward side.
Then use trim command to trim the unwanted lines. Select line command and select bottom horizontal point and attach to rigth top point.
Again use ray command vertically project every linen then draw a horizontal line at approximate distance and offset it at distance of 0.5 unit for three interval and one time vertical but from right side only.
Trim the unecessary line and use annotation command which is dim linear.

DRAWING 7

1)Aim & Intoduction :- Creating a drawing in which there are circular curves , circles and rectangles.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
Draw horizontal line which is length of 210 unit horizontally. And draw a vertlical line at rigth side which is length of 75 unit and left side point same vertically 100 unit.
Use fillet command for both corner which radius of 15 unit .
Draw a circle at random space of radius 35 unit then attach the circle to left side line by using osnap object command and select quadrant option of it.
Same goes for rigth side but this time radius is 25 unit.
Now offset the horizontal line at distance 60 unit downward direction. Again use object osnap quadrant option draw the vertcal line to both circles to the upward direction until they attach to the new offset horzontal line.
Then use fillet command for big circle side corner radius is 20 unit and smaller circle side 6 unit.
Now trim the circles. Both sides the vertical line length is also the centre of circles .
Use offset command for bigger circle side it is 35 unit and smaller circle side it is 30 unit then us get the centre of the circle .
And draw the circles. Now use offset command to offset the top horizontal line at downward direction at distance of 10 unit then again for 40 unit after that use again offset comannd on verticall line at distance of 20 unit left side and 15 unit right side and 70 unit again.
Trim the unrequired lines.
Use annotaion command Dimlinear, Dimradius for annotation.

DRAWING 8

1)Aim & Intoduction :- Creating a drawing in which there are four circles and joining line and attached to it forming a one object.

2)Procedure :

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
Select a particular in and draw a circle radius of 4 diameter and using same center line draw a another circle diameter of 5.
After that select line command and use object osnap quadrant option select the centre of both circles which is same. Draw the line straigth to the right side at length of 4.275 unit same proccedure follow to the left side or we can mirror it.
The end points of the lines is the center of the both smaller circles left right one.
Draw a circle diameter of 0.90 and mirror it to another side.
After that draw a circle using recently drawn circle center of radius 0.90.
And mirror it to another side.
Now select line command draw a tangent line at newly drawn circle radius of 0.90 and attached it to the bigger circle.
And mirror it to all side, then trim uneccesory lines.
After that use dimlinear, dimradius and dimdiameter for annotation.

DRAWING 9

1)Aim & Intoduction :- Creating a drawing in which the whole drawing depend upon curves and shape like stone.

2)Procedure :

For creating new drawing we will select new sheet 1st.
As per drawing required engineering unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0'-0"
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as Engineering unit style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 0'-1 1/2" text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Aligned with dimesion
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Architectural
Precision -->0'-0"
Decimal seperator --> NONE (This option diabled in Engineering)
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
Select a perticular approximate point and draw a circle radius of 41'-8".
Draw another circle radius of 8' and another one is 9'.
Attache both circles tangentially inside of the bigger circle to form a proper curve.
After attaching them trim the unecessory lines.
Now draw another circle which radius is 20'-10".
The smaller circles that attached to the bigger circle they should ar proper distance which is 32'-6".
And the recentely drawn circle attach to the bottom of the those smaller circles.
Use trim command to trim the circles and drawing is complete.
After user dimradius and and dimlinear for annotation.

DRAWING 10

1)Aim & Intoduction :- Creating a drawing in which the squares are their.

2)Procedure :

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
Select rectangle command and draw 10 by 10 unit sqaure.
Then give an offset of 0.35 unit.
Use copy command to copy the object and after use rotate command on copied object at an angle of 45 degree.
Then select the rotated square from the center and move to the original object at its centre.
After moving the object use trim command to trim the lines.

DRAWING 11

1)Aim & Intoduction :- Creating a drawing in which the squares are their.

2)Procedure :

1)Aim & Intoduction :- Creating a drawing which is kind of rectangular in shape with vertical V notch and two different dia circles but its not in accurate rectangle.

2)Procedure :-

For creating new drawing we will select new sheet 1st.
As per drawing required decimal unit for that we will go for unit command unit dialogue box will open then select the type as required unit which is decimal and precision is 0.0
Then we will go for dimesion style manager by typing dimesion command dialogue box will open.
We will go for new and giving it name as decimal units style, then go fo Lines.
In lines selection dimension colour line as 150, the line type and line weight would be as ISO standards.
Baseline is set as per requirement as well as extend beyond dim and offset from origing is also as per requirement of drawing.
Selecting extension line colour also 150 and extension line type 1, extension line type 2 and line weight as per ISO standard.
Then we'll go for Symbols and Arrows. In this first we have to select arrowheads --> 1st , 2nd and leader as closed filled.
After that arrow size --> as per requirement of drawing same goes center marks, break size and arc length symbol.
Radius jog dimension--> 45 angle and Linear jog dimesion as 1.5 text height factor.
Then we'll go for Text in this text style slecting as arial text colour as 150, Fill colour will be none text height as per requirement.
In text here is an option text placement in which we will go for Vertical--> Centered , Horizontal--> Centered and Veiw of direction --> Left to right .Offset from dim line --> As per requirement.
Text alignment --> Horizontal
Then another option is Fit. In which there are three options Fit option ,text placement and scale for dimension features.
First two option we will go for as per ISO standard and last option which is scale for dimesion features we'll go for as per drawing requirement.
Now most Important Primary units.
In which Unit format --> Decimal
Precision -->0.00
Decimal seperator -->Period
And there is no use of other option in this drawing. After Primary units there are two more option Alternate units and Tolerances which is also is no use for now.
After setting all the units we'll go for making drawing.
First select the line command and set co-ordinates (1,1) from this point draw a horizontal line of 3 units.
And by continuing it downward vertically 4'-6" then straight 4'-6" then upward vertically 1'-2" then staright horizontally 5'-4" downward vertically 1'-2" and after horizontally 4'-6" contiue to the upward direction vertically at length of 4'-6".
Then horizontally 3' after that verically 9'in upward direction.
Draw a straight vertical line from the starting point which length of 9'.
Then draw a horizontal straight line of v notches of angle 90 degree and 60 degree at approximate distance.
Use offset command and select the horizontal line which we drawn recently and offset it at distance of 6'-9" to downward direction.
Trim the line to show horizontal notches.
Again use offset command now select 9' vertical line and now both offset line intersecting at point is the centre of the box.
Now create a box outside drawing which is 3' by 3' and rotate it at 45 degree.
Then select the box by object osnap from the centre of it and place between the offset intersect lines.
Use trim command to trim lines which is unecessory.
Now drawing is complete. Use dimlinear and dimangular for annotation.

Drafting of various geometries using Chamfer, Fillet tool in AutoCad

Ship work like this
in your own course.

Talk to a career counsellor

Ship work like thisin your own course.

Talk to a career counsellor

Ship work like this
in your own course.