Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad
1)
AIM : TO CREATE THE LAYOUT OF RESEDENTIAL BUILDING PLAN WITH MULTIPLE VIEW PORT IN THE A1 SIZE PAPER SHEET & THE MARKED SCALE AS PER THE QUESTION
COMMAND USED :
- LAYOUT
- PAGE SETUP MANAGER
- MULTIPLE VIEW PORT
- ANNOTATION SCALE
THE FOLLOWING COMMAND HISTORY IS FOLLOWS AS USED TO MAKE THE LAYOUT:
Regenerating layout.
Regenerating model.
AutoCAD menu utilities loaded.
Command:
Command:
Command:
Command: Regenerating model - caching viewports.
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Regenerating model.
Restoring cached viewports - Regenerating layout.
Regenerating 3247 modified entities.
Restoring cached viewports.
Command: Restoring cached viewports - Regenerating layout.
Command: _.erase 1 found
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: @400,475
Regenerating model.
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: @375,475
Regenerating model.
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: @400,445
Regenerating model.
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: @300,445
Regenerating model.
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command: MS
MSPACE
Command: MS
MSPACE
Already in model space.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command: *Cancel*
Command: Regenerating model.
PS
PSPACE
Command: MS
MSPACE
Command: Regenerating model.
_CANNOSCALE
Enter new value for CANNOSCALE <"1:50">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: MS
MSPACE
Already in model space.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE
Command:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
Select objects:
Command:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
Select objects:
Command:
Command:
Command:
Command: _eattedit
Select a block: 689.289970,29.286953,0.000000
Command:
Command:
Command:
Command: _eattedit
Select a block: 774.260105,35.413711,0.000000
Command:
Command:
Command: _qsave
2)
AIM: TO CREATE THE KITCHEN LAYOUT AS SHOWN IN THE CHALLENGE 9 ON A4 SIZE SHEET PAPER WITH MULTIPLE VIEW PORT
COMMANDS USED ARE AS FOLLOWS
- LAYOUT
- PAGE SETUP MANAGER
- MULTIPLE VIEW PORT
- PAN
- ANNOTATION SCALE
- COPY
- PASTE
THE COMMAND HISTORY HAS BEEN SHOWN BELOW :
Opening an AutoCAD 2018 format file.
Regenerating model.
AutoCAD menu utilities loaded.
Command:
Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or Autodesk licensed application.
Command:
Command:
Command: Regenerating layout.
Regenerating layout.
Regenerating model - caching viewports.
Command: _.erase 1 found
Command: _.PAGESETUP
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:2
Command: DI
DIST
Specify first point: *Cancel*
Command: *Cancel*
Command: PS PSPACE
Command: DI
DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 296.4796, Angle in XY Plane = 0, Angle from XY Plane = 0
Delta X = 296.4796, Delta Y = 0.0000, Delta Z = 0.0000
Command: DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 206.5114, Angle in XY Plane = 90, Angle from XY Plane = 0
Delta X = 0.0000, Delta Y = 206.5114, Delta Z = 0.0000
Command: DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 209.6682, Angle in XY Plane = 90, Angle from XY Plane = 0
Delta X = 0.0000, Delta Y = 209.6682, Delta Z = 0.0000
Command: *Cancel*
Command: DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 296.4054, Angle in XY Plane = 0, Angle from XY Plane = 0
Delta X = 296.4054, Delta Y = 0.0000, Delta Z = 0.0000
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Regenerating layout.
Regenerating layout.
Regenerating model - caching viewports.
Command: _.PAGESETUP
Command:
Command: _.erase 1 found
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:2
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Regenerating model.
Command: *Cancel*
Command: PS
PSPACE
Command: *Cancel*
Command: *Cancel*
Command:
Regenerating model - caching viewports.
Command:
Command: *Cancel*
Command: *Cancel*
Command:
Restoring cached viewports - Regenerating layout.
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _.erase 1 found
Command: MS
MSPACE
There are no active Model space viewports.
Command: *Cancel*
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:2
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command: *Cancel*
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:2">: 1:1
Command: Regenerating model.
Regenerating model.
_CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:20
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: MS
MSPACE
Already in model space.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:20">: 1:20
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: PS
PSPACE
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _.erase 1 found
Command:
Command: *Cancel*
Command: *Cancel*
Command:
Restoring cached viewports.
Command: Regenerating model.
Regenerating model.
*Cancel*
Command: *Cancel*
Command:
Restoring cached viewports - Regenerating layout.
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:50">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:50">: 1:50
Command: *Cancel*
Command: PS
PSPACE
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:50
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Automatic save to C:\Users\hrush\AppData\Local\Temp\Drawing1_1_20851_dccd6169.sv$ ...
Command:
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:30
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:30">: 1:30
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:30">: 1:2
Command:
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object]
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP):
Requires a distance (or numberX).
Enter a scale factor (nX or nXP): *Cancel*
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:2">: 1:20
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command: *Cancel*
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:20">: 1:30
Command: *Cancel*
Command: PS
PSPACE
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:30
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE
Command:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
Select objects:
Command:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
Select objects:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
Select objects:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _-vports
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Select objects: _p
1 found
3)
AIM: TO CREATE THE LAYOUT OF INDUSTRIAL SECTION FROM CHALLENGE 10 USING THE MULTIPLE VIEW PORT COMMAND .
COMMANDS USED ARE AS FOLLOWS :
- LAYOUT
- PAGESETUP MANAGER
- MUTI VIEW PORT
- PAN
- SAVE
THE COMMAND HISTORY IS FOLLOWS AS :
Opening an AutoCAD 2018 format file.
Regenerating model.
AutoCAD menu utilities loaded.
Command:
Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or Autodesk licensed application.
Command:
Command:
Command: Regenerating layout.
Regenerating layout.
Regenerating model - caching viewports.
Command: _.erase 1 found
Command: Restoring cached viewports.
Command: Restoring cached viewports - Regenerating layout.
MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:100
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: PS
PSPACE
Command:
Command: _.erase 1 found
Command: _.PAGESETUP
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: Regenerating layout.
MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:100
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:100">: 1:100
Command: _.PAGESETUP
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: PS
PSPACE
Command:
Command: _.erase 1 found
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:100
Command: PS
PSPACE
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:30
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE
Command: MVIEW
Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4]
Specify opposite corner: Regenerating model.
Command: MS
MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE <"1:1">: 1:30
Command: PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: PS
PSPACE