Creation of Column Schedule and Drawing Template using AutoCad
Project: Creation of Column Schedule and Drawing Template using AutoCad
Aim: Creation of Column Schedule and Drawing Template using AutoCad
Introduction: create a column schedule and drawing template using various commands like, Text, annotation, Table, Arry, Blend, Measure, Dimension command and Quick selection object In autoCAD 2019
1)AIM: Create a column schedule as shown in the figure.
Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text.
Hint: Use font name: romans.shx; Height: 8”, Justify: Left
procedure: making table
make table by using line command
choose a line from toolbar
draw a horizontal line of 30m distance from left side to right
draw a verticle line of 10m distance from bottom to top
and then take offset of 5m according to vertcal line on right side
also take offset of 2m from top horizontal line towards bottom side
then agin take offset of 6.8 from previous line towards bottom
now take partition to middleportion of 2.5,2.5m
Procedure: make a column symboles
choose line command from toolbar
by the help of line commads draw proprtionate lines according to table
for making symboles
use offset commands for stirrups
by the help of small cicles we locate bars
by applying hatch on it
and make column or symboles as per given in table
Procedure: Text
choose text command
from ribbon or from dialog box
command: TEXT or DTEXT
modift it as follows
font name: romans.shx
height: 8"
Justify: Left
Result: we create column shedule in auto CAD by using line and text command (DTEXT)
2) AIM: Create a window schedule as shown in the figures:
Window Schedule:
Procedure: to make a table
choose a line command from tool bar
draw a horizonal line of 28m
draw a vertical line of 12m
give offset from vertical line 4m,6m,6m,6m,6m respectively
and from horizontal line offset of 2m,2m at last
and make column of 6 rows and 5 columns
Procedure: text write
choose a text command from annotation
and select font: romans.shx
height: 8"
Justify: Left
and text all things that mension in window schedule
Result: we draw window shedule table by using text and line command
3) AIM: Create the drawing template as shown in the figure:< Use the Notes as in the figure
Procedure: drawing templets
choose a line command from tool bar
or type line in dialog box
make a table of perticular size
and by using text command (DTEXT)
type all text given in fig.
Procedure: drawing templets
choose a line command from tool bar
or type line in dialog box
make a table of perticular size
and by using text command (DTEXT)
type all text given in fig.
Result:
we draw templet with text, by using DTEXT command for text and line command for drawing a table
4) AIM: Create the list of drawing schedule as shown in the figure:
Procedure:
choose a line command from tool bar
or type line on command bar as L
and draw a verticle table
having 3 columns and 31 rows
give it layer by red colour
Procedure: Text
Text the table
by using Text command
type DTEXT in dialog box
and modify setting as per requirement
and using single line in text
type a Text and fill the table
Result:
create the drawing list by using line command and text, and use various layer for it
5)AIM: Create the Beam detail as shown in the figure and provide text wherever given.
Procedure:
choose line command from tool bar
or type L in command box
draw a column of
width 1' and height 14' ( assumed )
and give break lines at end by using (BREKLINE command)
and give colour layer
shows beam of depth 3'9" in between column
Procedure: hatch, name and dimensions
give hatch on column
brick work, concrete
type command on dialog box(Hatch)
and gives it prober scale according to drawing
select Text from TEXT command and gives name to drawing with proper scale
give dimensions to sketch with diffrent layer
Result: we draw the section of column by using layer, dimension, text command and hatch cammand for effective drawing.
