All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
Question 1 :- Use the project file created from Week 2. Based on layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created…
Gaurav Pant
updated on 23 Aug 2021
Question 1 :-
Answer :-
Procedure :-
Creating Floor :-
Adding Floor to layout :-
RESULT :-
Question 2 :-
Answer :-
Procedure :-
Creating Walls Type :-
RESULT :-
-> When a wall is drawn, It's better to draw it in connect with level mode, because in the future if the height of the all walls needs to be change, then they can be changed by changing only the height of the respective levels but in unconnect walls the height should be changes individually.
-> It's better to model with height option for modelling walls.
Question 3 :-
Answer :-
Procedure :-
Coping the Model Elements to First Floor :-
RESULT :-
Question 4 :- Use interior partition walls to create separate rooms within your residential unit. The model must include the following rooms
The above are for examples. You can use them or use your measured entities to create your model based on your layout. You may include entry walkway, Patios or Guest
rooms based on your creativity and purpose of modeling. Convert units if you are using metric system.
Answer :-
Procedure :-
Creating Interior Partition Walls :-
Coping the Interior Wall to First Floor :-
Creating Pasio in First Floor :-
Creating Railings in Pasio :-
RESULT :-
Question 4 :-
Answer :-
Procedure :-
Inserting Model Elements :-
Creating Camera Views :-
RESULT :-
All doors and Windows are placed at the appropriate locations :-
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Projefct 1_Comparative study of different storey buildings for Seismic forces
AIM :- To model 10 different buildings on ETABS with given structural properties and names as provided in the below picture. To compare fundamental natural periods…
24 Dec 2021 07:31 AM IST
Modelling of 25 storey building with the specified properties using ETABS
AIM :- To model a 25 storey building on ETABS with given structural properties. To check if the translational fundamental natural period of vibration in both the x and y direction is approximate, Tx1 = 4.4 seconds Ty1 = 4.2 seconds. To check if the provision in Table 5 of IS 1893 (part 1) –…
19 Dec 2021 05:46 AM IST
Conceptual design of a building with columns and shear walls
Answer 1 :- Given :- The building shown, 20 × 35 m in the plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements (A), (B), (C), all with the same total cross-sectional area of the shear walls. AIM :-…
21 Nov 2021 08:27 PM IST
Concept on positioning of Columns
Question 1 :- Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. …
15 Nov 2021 11:09 AM IST
Related Courses
0 Hours of Content
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2024 Skill-Lync Inc. All Rights Reserved.