Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

AIM1: To Create the Kitchen Layout and to Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. All dimensions are in mm.

Procedure:

step 1:

• units are set to mm.
• limits and limax are also set.
• zoom comand is also used.

Step 2:

• In the command prompt type rec and the dimensions are 4734 X 3688mm.
• In the command prompt type offset and offset it to the distance of 230mm.
• Using arc and line command, doors are drawn.
• Hatch command is used to Hatch the model.
• Rectangle command is used to model the refrigerator.
• In the command prompt type offset and offset it to the horizontal distance of 350,450,900,450,450 and 560.
• In the command prompt type offset and offset it to the vertical distance of 600.
• In the command prompt type trim to trim the extras.
• In the command prompt type line type and load the dotted lines.
• In the command prompt type text to text the given annotations.
• In the command prompt type dimensions to given the dimensions to the plan.
• In the command prompt the leader command is used for naming the dimensions.

RESULT:

AIM-2: To create Elevation of the given plan with Hatch.

PROCEDURE:

• In the command prompt type I to draw the Iines.
• In the command prompt type rec to draw the rectangle to draw the arc .
• In the command prompt type arc
• Therefore, the window is created.

• In the command prompt type to draw the lines
• In the command prompt type rec to draw the rectangle.
• In the command prompt type l to draw the lines.

• In the command prompt type rec draw the rectangle.
• In the command prompt type rec draw the rectangle.

RESULT:

AIM-3: To create sectional view of industrial building

PROCEDURE:

• In the command prompt type c to draw the lines.
• In the Ribbon bar r > Hatch > AR AR.CONC.
• In the command prompt type rec to draw the rectangle
• In the command prompt type LT to get the dotted lines.
• In the command prompt type c to draw the circle.
• In the command prompt type Mt to draft the text.
• In the command prompt type dim to draft the dimensions

RESULT: