Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

Q1) AIM:  Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School. ANS) OFFICE BUILDING Q2) AIM :  Assume reasonable…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level.     AIM:- To model a Ceiling from the architecture tab above the walls at the first-floor level.     INTRODUCTION:- The creation…

Create a 3 dimensional model of the residential building with a rendered view.  AIM:To create a 3 dimensional model of the residential building To create a rendered view of the developed model.To use materials and light setting. Procedure:Here in the project we are going to create a 3d model of a residential…

1. Create a 3D Isometric View of the building with plan and elevation given. AIM:- To create a 3D isometric view of the given building with plan and elevation. INTRODUCTION:-  An isometric drawing is a 3D representation of an object, room, building or design on a 2D surface.One of the defining characteristics…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions that are missing. AIM:To create a 3D model of the Furniture element as per the given drawing  INTRODUCTION:3D modeling in AutoCAD includes 3D solids, surfaces, meshes, and wireframe objects. Types of 3D Models:  Several…

INTRODUCTION:- A drawing template file is a drawing file that has been saved with a . dwt file extension, and it specifies the styles, settings, and layouts in a drawing, including title blocks. The default drawing template files are provided as samples.Efficiency is also gained through template files because there…

Aim:To Create the Kitchen Layout and to Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required.All dimensions are in mm. Procedure:- step 1:-units are set to mm limits and limax are also set zoom comand is also used Steps for drawing Below Counter PlanOpen Auto…

Q1 Aim:To create the templates using autocad command and tools as per drawing required.Introduction: Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating…

AIM:To Design and Draft a layout of a residential building with plot size (18.3 m x 6 m) Commands Used:xl offsettrimExtensionADC (design centre )linerectanglelt (linetype)arcProcedure:step 1:In the command prompt type Units >meters In the command prompt type limmax >100,100In the command prompt type…

Aim -    To sketch a G+1 floor residential plan according to vastu Shastra and to list down the names of structural drawings required to be provided to the site for construction.  To assume the size of structural elements (Column, Beam, slab etc) and to calculate the loads from the members as per IS…

Calculate the Concrete Mix Design for M35 grade concrete with fly ash are following Mix design for M35 grade concrete with fly ash.   STEP 1- Stipulation for proportion   Grade of design - M35   Type of cement - OPC 43  taken from the  IS 8112  Type of mineral admixture - fly…