Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

1)Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.

ANSWER:

AIM: To Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.

PROCEDURE:

STEP-1:

• Units are set to mm
• limits are lim-max are also set
• zoom command is also used.

STEP-2:

• In the command Prompt type rec and the dimensions are 4734 x 3688mm.
• In the command Prompt type offset and offset it to the distanceof 250mm.
• Using arc and lines the door is drawn.
• in the command prompt type hatch to hatch the model.

STEP-3:

• In the command Prompt type rec> dimensions, to do the fridge.
• In the command Prompt type offset and offset it to the desired distance to get the micro oven.
• In the command Prompt type trim to trim the extras.
• In the command Prompt type offset and offset it to the horizontal distance of 350,450,900,450,450,and 560.
• In the command Prompt type trim to trim the extras.
• In the command Prompt type line type and load the dotted lines.

STEP-4:

• In the command Prompt type text to text the given anotations.
• In the command Prompt type dimensions to given the dimensions to your plan.
• In the command Prompt type even the leader command is used to name the dimensions.

STEP-5

• place all the elements in the required layers.

RESULT:

2. Create the elevation of the plan created in the Challenges 7 and apply proper hatch in the walls, doors, windows, and other architectural elements. Refer to the dimensions in Plans and sections in Challenges 7.

Answer:

Aim: To create the elevation of the plan with hatch.

PROCEDURE:

• in the command prompt type L to draw lines.
• in the command prompt type REC to draw rectangles.
• in the command prompt type arc to draw arc.
• therefor, the window is created.
  
  
  
• in the command prompt type L to draw lines.
• in the command prompt type REC to draw rectangles.
  
• in the command prompt type L to draw lines.
• in the command prompt type REC to draw rectangles.
  
• in the command prompt type REC to draw rectangles.
  
  
  
  

RESULT:

_{3. Create the section view of an industrial building as shown in Figure. Provide appropriate hatches and dimensions wherever required. Also, provide annotations to the drawing.}

AIM: To create the section view of an industrial building.

PROCEDURE:

• in the command prompt type L to draw lines.
• in the ribbon bar> hatch > AR.CONC.
• in the command prompt type REC to draw rectangles.
• in the ribbon bar > hatch > AR.CONC.
  
• in the command prompt type LT to get the dotted lines.
• in the command prompt C to draw circles.
• in the command prompt type Mt to draw Multiline text.
• in the command prompt type DIM to draft the dimensions.
  
• 

RESULT: