Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

1.Aim:To create a template by using Autocad software.

Procedure:

• In AutoCad first step is to set the units,Then next step is we have to create a tabel by using command the command is TABLE + ENTER .
• After enter the command the dialoge box should be opened in that we set the required amount of rows and columns and the change the table all to as data .
• Then we have to enter the reqired text by selecting the table box and the we have also the delete option the excess os table by using select the rows or columns then give the option as merge option to select.
• Then increse or descress the table height and width of the tabel .
• At last finall after completing the tabel we have to save by using Ctrl+S or save option selecting on file option.

Diagram:

i.

ii.

RESULT:By using AutoCad software we have completed the template.

2.AIM:To Create the doors type for warehouse .

PROCEDURE:

• In this diagram we need to draw the doors the name is Door-1 and Door-2.
• Change the units the scale as mm and the draw a line as the distance vertical is 2330mm and the draw the horizontal is 2750mm and then again vertical line of another side is same and the horizontal is also same distance.
• By using offset we have to offset the three lines and the again offset the small distance then by using dim. command try to fing the distance and the dived that into 4 then offset the horizontal line 3 times at the same distance on it.
• Then draw the rectangel by using rec command or select the rectangel icon on ribbon to draw the rectangel.
• Then again offset into 0.01 mm and the again offset 0.5 mm again then turn off ortho mode draw the line edge to center rectangel of the edge in all sides .
• Then copy that and paste it where if you required.
• Finally save the drawing.
• Then name that Door-1 and Door-2 by using text command .

Diagram:

RESULT:By using AutoCad software we have completed the doors type for warehouse .

3.AIM: To Create each symbol as a block with the name given in the legend.

Procedure:

• In this diagram we have to draw the symbol of legends and insert the tabel.
• By using tabel command enter into the dialoge box and the set the required amount of rows and columns in that image .
• Then selecting the box we named the text in that we texted that the required text .
• Then we have to draw the symbols into the box by using line,circle,offset,rectangel ,etc..
• At last complection of drawing the drawing we have to save the drawing by using ctrl+s command.

Diagram:

RESULT:By using AutoCad we complted our drawing as Create each symbol as a block with the name given in the legend.

4.AIM:To Create the door type for residential building as a block.

Procedure:

• First of all we have to set the units as scale as FEET.
• Then we have to draw the line as vertical distance is 6 feet and 11 inches then draw the horizontal distance is 2 feet and 1 inches .
• Then offset the three lines at the distance as 0.50 and the again offset the line distance is 0.01.
• Then draw the lockset left side and center to the height of the door.
• The second diagram is used the required size of rectangel and then we have to offset up side on then down side also.
• Then we have to draw the circle for the symbol of lockset.
• Then third diagram is differ the length of vertical and horizontal ,then draw the rectange as required size of the door.
• Then hatch the box by using hatch command and select the required style which you want for the diagram.
• Then using text name the text of the door that name is D-1,D-2, and D-3.
• Then we have to draw D-4,D-5 and D-6 doors also.
• That same procedure we hear applied that and the extra is fillet toll is used hear.
• Finally save the drawing.

DIAGRAM:

RESULT:By using AutoCad software we completed that door type for residential building as a block.

5.AIM:To Create each shape of a block .

PROCEDURE:

• In this diagram we have to insert the table by using table command .
• Then merge the unused tabel .
• Then type the text by selecting the box and the type the name .
• Now the table is completed but the remaining is diagrma that means symbol of that.
• So we have to draw into the box and then we have to use text and the text also we have used in the table.
• After completing diagram we have to save the diagram by using ctrl+s command we have used.

DIAGRAM:

RESULT:We have completed the diagram of shape of a block by using AutoCAD software.