Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

• Before starting drawing take new sheet in autocad.
• Type UN command Drawing Unts dialogue box will open select type as Decimal and precision as 0.
• And unit scale inserted content as Millimeters.
• Then Type D command Dimension style manager will open click on Modify.
• After clicking on modify first three setting as per standards but in fit option use overall scale as 255 then click on next setting which is Primary units.
• In Primary unit setting unit format as Decimal , Precision as 0 and Decimal separator as Period.
• Alternate unit setting will be off there is no requirement of that but in Tolerance setting the Vertical position setting as Middle.
• Remaining all the setting as per standards and now we can start making drawings.
• All the measurements which is going to use while making drawing which all are assumption.
• Draw a vertical line which is 5150mm long then give an offset of 2000mm and 2100mm.
• Then draw horizontal line to form them as rectangle after forming that give an offset of 100mm to upward and downward as well by using horizontal line which is recnetly drawn.
• Now use bottom horizontal line and give an offset of 340mm to upward side then contiue it 220mm, 330mm, 315mm, 400mm, 400mm, 1070mm, 200mm, 175mm, 175mm, 350mm and 175mm.
• Then draw all the vertical line where it necessary.
• Now use Multiline text commnad write Project no., Drawing no., Revision, Scale at AO, Date, Drawn, Checked, Title, Site, Architecture, Client, Status, Revision, Description, By and Date with text height of 40mm.
• All the text and lines are in 150 color, only some of lines are in bylayer black color.
• Then write Revision, Description, By and Date with height 85mm and in bylayer black color.
• The last one write title with text height of 120mm. and our one template is complete.
• Type command B then Block Definition dialogue box will open click on pick point select the point which you want after that click on select object.
• Selelct the object then enter name Customblock_title1.
• Now our focus is on making of sheet.
• Draw a vertical line of 5150mm then give an offset of 7700mm.
• Attach those lines by drawing horizontal line of to upward and downward.
• Now a rectangle is formed select bottom line then give an offset of 380mm, 650mm, 170mm, 150mm, 150mm, 300mm and150mm.
• Trim the unnecessary line draw vertical line as per requirement.
• Then use multiline text command and write Scale at A4, Drawn, Checked, Revision, Drawing noo., Project no., Date, Site and Title with height 30mm.
• Type command B then Block Definition dialogue box will open click on pick point select the point which you want after that click on select object.
• Selelct the object then enter name Customblock_title2.

2. ANS:-

• Before starting drawing take new sheet in autocad.
• Type UN command Drawing Unts dialogue box will open select type as Decimal and precision as 0.
• And unit scale inserted content as Millimeters.
• Then Type D command Dimension style manager will open click on Modify.
• After clicking on modify first three setting as per standards but in fit option use overall scale as 255 then click on next setting which is Primary units.
• In Primary unit setting unit format as Decimal , Precision as 0 and Decimal separator as Period.
• Alternate unit setting will be off there is no requirement of that but in Tolerance setting the Vertical position setting as Middle.
• Remaining all the setting as per standards and now we can start making drawings.
• Draw a vertical line of 2750mm and give an offset of 2330mm then join them by drawing horizontal line of 2330mm to the upward and downward.
• Now a rectangle is formed.
• After that select give an 10mm and 20mm offset to all four sides.
• Now create rectangle which is 800 X 300mm then give an offset of 20mm and 40mm.
• Join the corners by line command.
• After that covert it into block.
• Type command B then Block Definition dialogue box will open click on pick point select the point which you want after that click on select object.
• Selelct the object then enter name Doorblock_1 and save it.
• Then use divide command and divide the rectangle into four vertical volumns.
• Draw a vertical line on that points and give an offset of 5mm to the right and left side.
• After that delete the middle line.
• Then use Insert command insert block in three rows and fours columns.
• Now create the handle by draw a rectangle which is 100 X 20mm for two time.
• Trim the unnecessary line and our door is ready.
• Now copy the whole drawing accept that block.
• And another drawing is also ready.
• Type command B then Block Definition dialogue box will open click on pick point select the point which you want after that click on select object.
• Selelct the object then enter name Door_1 and save it.
• Convert both of them into blocks name the second door as Door_2.

3. ANS:-

• Before starting drawing take new sheet in autocad.
• Type UN command Drawing Unts dialogue box will open select type as Decimal and precision as 0.
• And unit scale inserted content as Millimeters.
• Then Type D command Dimension style manager will open click on Modify.
• After clicking on modify first three setting as per standards but in fit option use overall scale as 255 then click on next setting which is Primary units.
• In Primary unit setting unit format as Decimal , Precision as 0 and Decimal separator as Period.
• Alternate unit setting will be off there is no requirement of that but in Tolerance setting the Vertical position setting as Middle.
• Remaining all the setting as per standards and now we can start making drawings.
• Draw a circle with radius of 30mm and then draw line at an approx. angle with staright hook.
• Then copy it for 5 times.
• Type command B then Block Definition dialogue box will open click on pick point select the point which you want after that click on select object.
• Selelct the object then enter name SINGLE GANG SWITCH and save it.
• Draw small line in 2nd diagram and selelct the object then enter name DOUBLE GANG SWITCH and save it.
• Draw small line in 3rd diagram and selelct the object then enter name TRIPLE GANG SWITCH and save it.
• In four diagram there is no need to draw small line just use hatch command and hatch the circle using solid type block color.
• Selelct the object then enter name SINGLE TWO WAY SWITCH and save it.
• Draw small line in 5th diagram and selelct the object then enter name DOUBLE TWO WAY SWITCH and save it.
• Draw small line in 5th diagram and selelct the object then enter name TRIPPLE TWO WAY SWITCH and save it.
• Draw a small circle with radius of 20mm and then use line to make tentacles to the head and bottom.
• Use hatch command hatch the circle using solid type block color.
• Selelct the object then enter name SWITCH CROSS and save it.
• Copy the last object and delete bottom tentacles and hatch.
• Selelct the object then enter name SWITCH SERIAL and save it.
• Draw a circle with radius of 60mm and draw a small vertical line on top of the circle.
• Selelct the object then enter name SINGLE SOCKET and save it.
• Now copy the last object for 7 times.
• In 2nd object draw a small horizontal line on vertical which already drawn to the object.
• Selelct the object then enter name SINGLE SOCKET FOR LAMP and save it.
• In 3rd drawing copy the object by attaching to it.
• Selelct the object then enter name DOUBLE SOCKET and save it.
• In 4th drawing just put the object into the square.
• Selelct the object then enter name FLOOR SOCKET SINGLE and save it.
• In 5th object draw a small horizontal line on vertical which already drawn to the object and put into the square.
• Selelct the object then enter name FLOOR SINGLE SOCKET FOR LAMP and save it.
• In 6th drawing copy the object by attaching to it and put them in to rectangle.
• Selelct the object then enter name FLOOR SOCKET DOUBLE and save it.
• In 7th diagram draw a traingle put them both into rectangle.
• Selelct the object then enter name FLOOR SINGLE SOCKET TELEPHONE and save it.
• Now use last object and copy the semi circle to the left side then delete the rectangle put them into little big rectangle.
• Selelct the object then enter name FLOOR DOUBLE SOCKET TELEPHONE and save it.
• Draw a triangle copy it for three times and Selelct the object then enter name TELEPHONE SOCKET and save it.
• In 2nd triangle write I in the triangle and Selelct the object then enter name INTERNET SOCKET and save it.
• In 3rd triangle write TV in the triangle and Selelct the object then enter name TV SOCKET and save it.
• In 3rd triangle write W in the triangle and Selelct the object then enter name WEATHER PROOF SOCKET and save it.
• Draw a plug shape and Selelct the object then enter name DECT BASE STATION and save it.
• Draw a circle which dia is 120mm then draw vertical as well as horizontal line in middle of the circle like hair cross then draw two vertical lines like these circle suspending on it and on rectsngle.
• Selelct the object then enter name WALL BRACKET and save it.
• Create a lamp stand and draw a rectangle on it and Selelct the object then enter name PICTURE LAMP and save it.
• After that draw rectangle give a heading to it as Symbol legends , plan and name.
• Insert them by using command insert.

4 ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0".
• Draw a vertical line which is 6'-11" long and give an offset of 2'-10".
• Now join those two vertical lines by drawing horizontal lines at top and bottom which forms a rectangle.
• Then use offset command and give an offset of 1.5" from right, top and from left side.
• The lines which are intersecting each other just trim that by using trim command.
• Draw a rectangle which is 8"inch by 2" in stand possition and create another rectangle which is 1.5" by 6.5" in landing possition.
• And last one draw a circle which diameter is 1", arrange them these three object in proper manner and place in possition to form a door handle and lock.
• Use dimlinear command for annotation of door height is 6'-11" and length is 2'-10".
• Use multiline text command and name it is as D1 with height of 6".
• Draw a vertical line of 6'-11" long and give an offset of 3'-4".
• Now join those two vertical lines by drawing horizontal lines at top and bottom which forms a rectangle.
• Then use join command to join left, top and right lines.
• Now use offset command to give an offset of 1" and 0.8".
• After that use ray command draw vertical line at centre of the door.
• By doing that we get a center of door.
• Draw a rectangle which is 2'-5" by 3'-3" place it proper in top side which proper adjacement.
• Select offset command and give an offset of 0.8" and 0.8".
• Then we get two new rectangles.
• Create 8"inch by 8"inch square outside the door diagram and give an offset of 0.5"inch to inside the square.
• Draw ovewrite on vertical inside line and horizontal top inside line.
• Use divide command the horizontal line in 4 parts and vertical line in 5 parts.
• Then use ray command select that point and draw straightline using that points by horizonatally and vertically.
• We get the centers of square place that sqaure in at place and copy to other place.
• Now we form a 4 rows and 3 columns of square.
• As we can see upper posrtion is done.
• Draw a circle at middle which radius of 2".
• Again we have to draw rectangle which is 2'-4.5" by 2'-2.5" at middle of the door but in lower portion.
• Then give four time 0.8"inch offset then 2 " and again 0.8" close the command.
• Use dimlinear command for annotation of door height is 6'-11" and length is 3'-4".
• Use multiline text command and name it is as D2 with height of 6".
• Then move on to the next door.
• Draw a vertical line which is 6'-10.3" long and give an offset of 2'-9".
• Joing those vertical line by drawing horizontal line at top and bottom.
• It forms a rectangle then give an offset of 0.8",1.5",0.8" and 1"inch.
• Only from three side just we did last door.
• Copy the door hangle and lock from door D1.
• Form a rectangle at top side and hatch it.
• Use dimlinear command for annotation of door height is 6'-10.3" and length is 2'-9".
• Use multiline text command and name it is as D3 with height of 6".
• The Door D2 and D4 are almost same but only difference is bottom portion.
• So copy the D2 first we have to make changes in bottom portion then we focus on upper portion.
• Make a rectangle of 2'-4.5" by 2'-2.5" then give an offset of 0.8" and 0.8".
• Create a square 7.5" X 7.5" then give an offset of 0.5".
• Then place that sqaure in three rows and three column in that rectangle place.
• Now we focus on upper portion.
• As we know that it is in semi circular potion.
• Form a circule which radius is 1'-8" then give an offset of 1", 0.8", 4.6", 0.8", 0.8" and 0.5".
• Use dimlinear command for annotation of door height is 6'-11" and length is 3'-4".
• Use multiline text command and name it is as D4 with height of 6".
• Copy the Door D2 and delete the bottom portion.
• Copy the D4 bottom portion and paste it to the copy of D2 and our door is ready.
• Use dimlinear command for annotation of door height is 6'-11" an

5 ANS:-

• Before starting drawing take new sheet in autocad.
• Type UN command Drawing Unts dialogue box will open select type as Decimal and precision as 0.
• And unit scale inserted content as Millimeters.
• Then Type D command Dimension style manager will open click on Modify.
• After clicking on modify first three setting as per standards but in fit option use overall scale as 255 then click on next setting which is Primary units.
• In Primary unit setting unit format as Decimal , Precision as 0 and Decimal separator as Period.
• Alternate unit setting will be off there is no requirement of that but in Tolerance setting the Vertical position setting as Middle.
• Remaining all the setting as per standards and now we can start making drawings.
• Draw a vertical line which is 2550mm long and draw horizontal line of 5060mm long.
• Then use offset command and give offset by using vertical line of 5060mm and by using horizontal line give an offset of 2550mm.
• Now select the vertical line and give an offset of 560mm, 990mm, 560mm, 310mm, 880mm, 830mm and 940mm.
• After that use horizontal line give an offset of 180mm, 400mm, 400mm, 400mm, 400mm and 400mm.
• Now we have all the blocks which are going to use.
• In first row give heading to all columns which is Type, Shape-size, Length(m), No, Total length(m), Unit weight(kg/m), Total weigth(kg) with text height of 60mm.
• In second row first column write A(20mm) and draw line which is 750mm long use fillet command give an fillet of 18mm radius to both side.
• Then write 18=9d to the one side and to the another side write 18 with text heigth of 40mm.
• In length column write 7.86, in no column write 3, total length 23.58, unit weight 2.5, total weigth 58.95 with text height of 60mm.
• In 3rd row first column write B(16mm) then draw horizontal line of 390mm to the left side draw a line at an approx angle and then mirror it to the right after that use fillet command to the right and angain mirror it to the left.
• Use dimlinear command for annotation.
• Write 14.5 for two times, length=8.16, No=2, Total length=16.32, Unit weight=1.6, Total weight=26.11.
• In 4th row first column write C(16mm) then draw a horizontal line of 210mm then to the left draw a line which approx in angle then again continuing to it to left side straight horizontally 180mm.
• Then use fillet command after that mirror the whole portion to the right.
• Use dimlinear command for annotation and write 14.4 for two times.
• Write length=8.13, No=2, Total length=16.26, Unit weight=1.6, Total weight=26.0.
• In 5th row first column write D(12mm) and draw a straight line which 750mm long then use fillet command.
• Write length=7.72, No=2, Total length=15.44, Unit weight=0.89, Total weight=13.74.
• In last row first write E(10mm) and draw rectangle which is 43mm X 23mm then use all four corners of 12mm then write Hook=12xd =12cm.
• Write length=1.56, No=38, Total length=59.28, Unit weight=0.62, Total weight=36.75.