Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

PROBLEM-1

AIM - TO CREATE TEMPLATES AND SAVE THE CREATED TEMLATES AS A BLOCK USING BLOCK COMMAND.

STEPS FOR CREATING TEMPLATE 1 -

1. Open auto Cad and enter UN (Units command) in the command box and select type as decimal and set precision of decimal as 0
2. Select X line command and draw horizontal line and vertical line.
3. Trim the unwanted lines.
4. Offset 1700 from vertical line and trim the unwanted lines.
5. Give the following offsets in the y direction that is offset to the horizontal line.
6. Offset 115.
7. Offset 250.
8. Offset 115 three times.
9. Offset 500.
10. Offset 350 two times.
11. Offset 250 two times.
12. Offset 200.
13. Offset 220.

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers-

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select color RED for layer of table.

• Creating block.

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name for template as Custom1_titleblock

STEPS FOR CREATING TEMPLATE 2 -

1. Open auto Cad and enter UN (Units command) in the command box and select type as decimal and set precision of decimal as
2. First create the block of amendments.
3. Draw a rectangle of size 170 x 150.offset 25, 50,25 ,25 ,25 in the horizontal direction that is in the y direction.
4. Create another table by sing line command.
5. Draw a rectangle of 800x 100. Offset 50 in the vertical direction.
6. Draw the inter blocks by assuming various dimensions.

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers -

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select color RED for layer of table.

• Creating block -

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name for template as Custom2_titleblock

PROBLEM 2 -

AIM- TO DRAW THE DOOR.

• STEPS FOR DRAWING THE DOOR.

1. Open auto Cad and enter UN (Units command) in the command box and select type as decimal and set precision of decimal as 0
2. Select line command from the ribbon and draw a line of 2330 in the horizontal direction and a line of 2750 in the vertical direction and complete the rectangle.
3. Offset 583 from the vertical line of the rectangle towards he inside of the rectangle.
4. Offset 583 three times.
5. Again offset 5 to left and right side of each offseted line of 583 line.
6. Trim the unwanted lines.
7. Draw the panels as shown in the figure by taking the suitable dimensions.

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers -

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select yellow colour and give the layer name as furniture.

• Creating block.

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name as door_123

PROBLEM NO 3-

AIM- TO CREATE A SYMBOL LEGEND AND SAVE IT AS A BLOCK.

• STEPS FOR DRAWING LEGEND -

1. Open auto Cad and enter UN (Units command) in the command box and select type as decimal and set precision of decimal as 0
2. Select line command from the ribbon and draw a line of 390 in the horizontal direction and a line of 200 in the vertical direction and complete the rectangle.
3. Give offsets as follows in the X direction.
4. Offset 35.
5. Offset 95.
6. Offset 35.
7. Offset 95.
8. Offset 35.
9. Offset 95.
10. Give the offsets as follows in the Y direction.
11. Offset 10.
12. Offset 10.
13. Offset 20 for 8 times t complete the table.
14. Draw the electrical fittings as shown in the table by using the line and various other tools.

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers -

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select color RED for table and color 30 for the electrical fittings.

• Creating block.

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name as symbol legend.

PROBLEM- 4

AIM- TO DRAW THE VARIOUS TYPES OF DOORS.

• STEPS FOR DRAWING THE DOORS D1, D2, D3, D4, D5, D6.

1. Line command is used fir drawing the doors of various sizes.
2. Door D1, D2, D3 has same height of 6’-11’.
3. Width of door D1 is 2’-10’’, width of door D2 is 3’-4’’, width of door D3 is 2’-9’’.
4. Width and height of door D4, D5, D6 is assumed as width as 3’4’’ and height as 6’-10’’

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers-

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select RED color for furnitre

• Creating block.

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name as D1 D2 D3 D4 D5 AND D6.

PROBLEM 5-

AIM- TO CREATE A BAR BENDING SCHEDULE AS SHOWN IN THE FIGURE.

• STEPS FOR DRAWING THE BAR BENDING SCHEDULE.

1. Open auto Cad and enter UN (Units command) in the command box and select type as decimal and set precision of decimal as 0
2. Select line command from the ribbon and draw a line OF 2550 in the X direction and a line of 1100 in the Y direction.
3. Give offsets as follows in the X direction.
4. Offset 150
5. Offset 1200
6. Offset 150.
7. Offset 150.
8. Offset 300 for 3 times.
9. Give the offsets as follows in the Y direction.
10. Offset 100
11. Offset 200 for 5 times and complete the table
12. Trim the unwanted lines.
13. Line command is used to draw the reinforcement shown in the table in the desired way.

• Dimension- For drawing dimension using dimension tool in the ribbon.
• Text- For naming of plan use text in ribbon in that use multiline text.

• Creating layers -

1. In the Layer Properties Manager, click New Layer.
2. A layer name is added to the layer list.
3. Enter a new layer name by typing over the highlighted layer name.
4. Specify the settings and default properties of the new layer by clicking in each column
5. Select RED color for reinforcement and color WHITE for table

• Creating block.

1. Enter B in the command box to open block panel.
2. Enter a name for the block.
3. Click Select Objects, and select the graphic symbol and the attributes to include in the elevation label.
4. Give block name as bar bending schedule