Creating Architectural and Structural model with 3D rendering using REVIT

1. Multi-Unit Residential Apartment

2. Selected modeling is done using NBC requirements

    Assume the apartment is in the city

     Follow the rules according to NBC 2005

     Project height is assumed to be 13m, road width is 19m

3. Open an architectural template in revit software and save it as Project 2- Arch   

    Draw the grid lines and specify the coordinates for both horizontal and vertical grid lines

    click collaborate and save it 

   next, open a new project save it as project2- struct

   Repeat the 2 and 3 steps

   Create new architectural drawings and using manage link add the drawings

   select the acquired link and set the coordinate

   Next, draw the structural components and set the drawings and save. 

 Open architectural template--> copy the grids which were created in the structural template and copy it--> paste the grid in architectural template--> select the grids and pin it--> click the elevation and create the levels required from architectural tab--> click virtual graphics setting and select custom in the annotation of the grids--> start create an exterior wall on grid lines--> then floor tool add floors to all levels of project--> By the way same do in walls--> add stairs to all levels in it--> add railing system in the staircase--> add windows,doors to walls--> load the load families in the components required for the project and add them in drawing them in the load family--> set the camera in all rooms to view the pictures --> save

5.  Open Revit --> view tab--> select sheet too;--> dialogue box appears and then press A1 metric--> ok

     Rename the sheet --> go to insert tab and load images--> add images to sheet --> add the structural and           architectural models and also the plans elevation

6.

Open 3D view--> set the view to take picture where we want to render the area--> then click vbiew--> then render--> render option appears--> select the area and crop the image--> then change the styles , lighting schemes and click render--> image appear 

 7.

 Click the view--> open file--> print

 Print dialog box appears --> change the setting of sheet size, texts styles and page setup--> clink print --> ok

Click the views and open file menu and click the print.