Challenge

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

Open the Architectural template and go to manage tab
select dynamo and go to new option
start the process by inserting three integer silder
this can be done by typing code block in the library search panel
one block named (value-5)
second one(-200)
Third one(value-1)
Type the rangr in library and insert it
connect the three blocks
now search the coordinates in panel
connect the range block to x coordinate of the point
Then connect to Y coordinate of the points
Hence, the set of sinusoidal points are obtained
convert them to curve
It can be created from nurbscurve
Search nurbscurve in library and choose curves by control points
now connect the points by coordinate block as input for the nurbs curve, a line will be developed
sinusoidal curve is developed
Develop surface
Create a group for easiness
this can be done by selecting input block and go to edit option and create node
Groped together
Copy the entire block two times
adjust phase to view the two curves
Create the surface
Create list and search
connect all the output of the sine curves
This will serve as input and creatr the surface

Open new template- manage tab and open dynamo then take new
to create wall first create four control points.
Search points by coordinates in the search panel
orgin name as(0,0,0)and rest is named as accordingly
provide two integer slider and provide values
Connect these points by a line
Search line by start and end points and insert 4 blocks
Input these blocks by points
layout of floor plan obtained
Search wall in panel and choose curve and height
Input curve,height,levels and wall type
for curve, combine all four lines ina list by choosing list
for height another slider is choosen and name it as height
for level search level in the search panel it will contain the levels available in revit folder
For wall search wall type and it will display wall types

Open new arch template
Open Architectural tab-columns- Arch column- place column
Properties of model elements re varied using dynamo
open dynamo
search for model elements, integer slider, set rotation
rename integer slider as rotation angle
select the element, block will be the input for family instance and integer slider

open revit- new- conceptual mass- mass
Go to the elevation view and create a level
Using the Spline tool to draw desire
Now create a profile to sweep through the curve
Set the workplane at the points and develop a polygon at the workplace keeping the point at the centre and the polygon is developed
Workplane and polygon is developed at all nodes
Create the surface which done through sweep
Select all Polygon and the curve line and choose create from option
Select the entire form and then filter and retain only the form
Select form- divide surface- provide the pattern
Open new family- curtain panel pattern
Select pattern
Create the reference point at centre
Draw the radius of the circle at the reference point
Select the pattern, reference plane, circle created
Load into project
select the entire from the walkway and filter it to retain
Select the family

Ship work like this
in your own course.