Creating Architectural and Structural model with 3D rendering using REVIT

1) Select the type of structure you want to build from one of the three below:
        a. Multi-Unit Residential Apartment
        b. Office Buildings
        c. School Building

Ans-01:-

1. School Building.

2) Assume reasonable assumptions for geographic and location details for your project modeling. Based on assumptions and type of structure selected identify the modeling requirements from NBC

Ans-02:-

• Educational building – Except for nursery school, the open spaces around the building shall be not less than 6M.
• The type of Construction as type 2 construction, The FAR value for the School building shall be taken as 2.0.
• The Plot size taken as 30m x 10m. The area of plot 300 sq.m and Floor area is 220 sq.m. Hence FAR value obtained is 0.733.
• Pre-Primary school, Nursery school – 1 for every 2500 population
• Area per school – 0.08 Ha
• Location of pre- Primary/Nursery school – to be located near a park.
• The width of the road abutting the building is taken as 9M
• Location-Chennai

3) Using the structural model, include the following components based on the type of structure selected
        a. Foundation – Isolated / Wall/Matt Foundation
        b. Columns
        c. Beams Connected to Columns
        d. Roof Framing/ Truss
        e. Floor / Decks
        f. Floor Openings for Elevators and Stairs

Ans:-03

Aim:-

To using the structural model, include the following components based on the type of structure like foundations, Columns beams etc.

Foundation Plan:-

Structural Framing work Colums, Beam & Floor:-

4) Using the architectural model, include the following components based on the type of structure selected
        a. Wall Layout with appropriate material and finishing
        b. Exterior façade with fancy finish
        c. Interior partition walls to size rooms
        d. Components to add details to a room ( Desk, Chair, Lighting, Plumbing fixtures)
        e. Add components such as stairs Elevators
        f. Have at-least one side of the building with curtain walls and glass panels
        g. Include interior and exterior lighting fixtures

Ans-04:-

AIM:-

To Using the architectural model, include the following components like wall, ceiling, Partition wall, Windows, Doors, Furnitures, Stairs, Lightings, Curtain wall.

5) Provide a set of drawings in an architectural and structural model to list the following details with categories and appropriate sheet templates included
        a. Floor Plans with Annotations
        b. Elevations
        c. Sections

Ans:-05

Floor Plans:-

GROUND FLOOR:-

FIRST FLOOR:-

2ND FLOOR:-

3RD FLOOR:-

ELEVATIONS:-

EAST:-

WEST:-

SOUTH:-

NORTH:-

SECTION-1/1:-

SECTION-2/2:-

6) Using the Rendering settings, Render images of the 3D model produced and include the rendered images to the drawing sheets
        a. Rendering from interior rooms
        b. Rendering from out showing topographic features
        c. Rendering through structural framing

Ans-06:-

7) Print the set of drawing sheets created and submit the drawings from the architecture and structure model

Ans-07:-