Creating Architectural and Structural model with 3D rendering using REVIT

Aim : 1

Using the structural model, include the following components based on the type of structure selected
a. Foundation – Isolated / Wall/Matt Foundation
b. Columns
c. Beams Connected to Columns
d. Roof Framing/ Truss
e. Floor / Decks
f. Floor Openings for Elevators and Stairs

step 1

• open the revit software
• the click new fire
• select the architecture
• Using the structural model, include the following components based on the type of structure selected
  a. Foundation – Isolated / Wall/Matt Foundation
  b. Columns
  c. Beams Connected to Columns
  d. Roof Framing/ Truss
  e. Floor / Decks
  f. Floor Openings for Elevators and Stairs

result:

Aim : 2

Provide a set of drawings in an architectural and structural model to list the following details with categories and appropriate sheet templates included
a. Floor Plans with Annotations
b. Elevations
c. Sections

step 1

• open the revit software
• the click new fire
• select the architecture
• Provide a set of drawings in an architectural and structural model to list the following details with categories and appropriate sheet templates included
  a. Floor Plans with Annotations
  b. Elevations
  c. Sections

result:

Aim : 2

Open another new file but with a structural template. Using the manage tab set project parameters the same as the architectural model. Copy the parameters from the architectural model to the structural template or enter the parameters manually into the structural model

step 1

• open the revit software
• the click new fire
• select the architecture
• Open another new file but with a structural template. Using the manage tab set project parameters the same as the architectural model. Copy the parameters from the architectural model to the structural template or enter the parameters manually into the structural model

result:

Aim : 2

Open another new file but with a structural template. Using the manage tab set project parameters the same as the architectural model. Copy the parameters from the architectural model to the structural template or enter the parameters manually into the structural model

step 1

• open the revit software
• the click new fire
• select the architecture
• Open another new file but with a structural template. Using the manage tab set project parameters the same as the architectural model. Copy the parameters from the architectural model to the structural template or enter the parameters manually into the structural model

result:

Aim : 2

Using the Rendering settings, Render images of the 3D model produced and include the rendered images to the drawing sheets
a. Rendering from interior rooms
b. Rendering from out showing topographic features
c. Rendering through structural framing

step 1

• open the revit software
• the click new fire
• select the architecture
• Using the Rendering settings, Render images of the 3D model produced and include the rendered images to the drawing sheets
  a. Rendering from interior rooms
  b. Rendering from out showing topographic features
  c. Rendering through structural framingl

result: