Creating Architectural and Structural model with 3D rendering using REVIT

1) To start a construction project of a multiunit residential apartment , a large number of factors are to be considered. A residential unit should contain a living space, kitchen , bathroom/water -closets, storage room, bedrooms, balcony , parking space, terrace , stairs, escalator , generator, etc. My project being a 5 storey residential building with a terrace and parking space is all according to NBC specified norms.

2) The project is build alongside a 18metres wide road, to which NBC says there should be atleast 9metre accessible path around a residential area, thus approving the condition. On three of its sides there is green area, front small compartment for generator. On the gate there is a guard room. Ground floor is specifically designed for parking space. One typical unit will have 1 bedroom, one storage room, living area, dinning area, kitchen, 1 bathroom , one balcony. To the main entrace there is a corridor leading to lift and stairs. On the terrace there are water tanks and solar panels. The total FAR calculated is in accordance to the specified FAR in NBC along with green area calculations . The kitchen height is not less then 2.75m and area not less than 5sqm. Bathroom height is not less than 2.1m and area is not less 1.8sqm , provided with a window of area not less than 0.3sqm for ventilation. Height of all rooms are not less than 2.75m and area not less than 9.5sqm. A slope is provided at the main entrance for the rain water runoff. One balcony provided with width not less than 3m.

Project specifications:

plot size of 21500 x21500mm

ground floor- staircase , lift, parking space, green area

first to fifth floor - 1 typical unit having 1 bedroom , 1 kitchen , 1 bathroom, 1 store room , dining area and 1 balcony.

Each floor height 3000mm.
Open terrace

find the 3d models of both architectural and structure below