Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

Challenge 6 Submitted by Kanala Rahul Reddy 1. Create a MicroStation rectangle, and complex line and apply civil rule features to the same with linear > match line feature definition. Aim: To Create a MicroStation rectangle, and complex line and apply civil rule features to the same with linear and match line…

Challenge 5 Submitted by Kanala Rahul Reddy 1. Create a new DGN file for horizontal geometry. Draw tangent lines with various methods. Insert curves in between them as well at the ends. Apply feature definitions to all these elements. Aim: To create a new DGN file for horizontal geometry using various methods Introduction:…

1. Create a terrain model by different methods –  By Graphical Filter By text interpolation By elements Aim: To Create a Terrain model by different methods Introduction: Digital Terrain Models (DTM) sometimes called Digital Elevation Models (DEM) is a topographic model of the bare Earth that can be manipulated…

1. Create a terrain model by different methods –  From file By ASCII By Graphical Filter By text interpolation By elements Aim: To Create a Terrain model by different methods Introduction: Digital Terrain Models (DTM) sometimes called Digital Elevation Models (DEM) is a topographic model of the bare Earth that…

Challenge 2 Submitted by Kanala Rahul Reddy 1. What are workspaces and worksets? List Civil-specific variables (min. 5). Where are the workspaces saved on the computer (default location)?  WorkSpace: A Workspace is a collection of projects, standards, and other related resources. In general, a WorkSpace is a…

1. Create a design summary report (DSR) for the following items for any highway you are aware of in your region. Mention the highway name, and location: - Category/Class of the road. The design speed of the road. Terrain classification. Travel Lane width. Typical min. cross slope. Horizontal curve radius without superelevation.…

Challenge 11 Submitted by Kanala Rahul Reddy 1. Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class. Aim: Use the Architecture/ Structure Project file developed…

Challenge 10 Submitted by Kanala Rahul Reddy 1) Using Dynamo creates a set of sinusoidal points and create a curve and create a surface out of the curve. Aim: To create a set of sinusoidal points and create a curve and create a surface out of the curve Introduction:  Dynamo is an open-source visual programming…

Challenge 8 Submitted by Kanala Rahul Reddy 1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using a 3D model create a section box           b. To create similar doors and windows in a floor…

Challenge 8 Submitted by Kanala Rahul Reddy 1) What are HVAC systems? Why are they essential in the modeling of buildings HVAC stands for Heating, Ventilation, and Air Conditioning. HVAC refers to the different systems used for moving air between indoor and outdoor areas, along with heating and cooling both residential…

Project 2 (Challenge 7) Submitted by Kanala Rahul Reddy 1) Select the type of structure you want to build from one of the three below: Multi-Unit Residential Apartment Office Buildings School The Building I Choose is a School Building 2) Assume reasonable assumptions for geographic and location details for your project…

Challenge 6 Submitted by KANALA RAHUL REDDY 1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Aim: To set project Base-point and project shared coordinates Introduction: The project base point can be used to establish a reference for measuring…

Challenge 3 Submitted by Kanala Rahul Reddy 1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit? The National Building Code (NBC) is a standardized set of rules to be followed by authorities and construction firms, to provide a healthy and safe living experience for all residents.…

Project 1 (Revit) Submitter By KANALA RAHUL REDDY 1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Aim: To Model a Ceiling to the first-floor Introduction: A ceiling is an overhead interior surface that covers…

Challenge 3 Submitted by Kanala Rahul Reddy 1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using the floor tool under the architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor…

Revit Challenge 2 Submitted By Kanala Rahul Reddy What is BIM? Summarize the features of BIM and the benefits of using BIM over 2D CAD tools. A). BIM is an acronym for Building Information Modeling or Building Information Management. It is a highly collaborative process that allows architects, engineers, real estate developers,…

Challenge 1 (REVIT) Submitted by Kanala Rahul Reddy From the file menu, create a new project (Structural / Architectural / Construction template) and name the project appropriately. Aim:  To Create a new project and name the project appropriately Introduction: Revit is an Autodesk product and is a building information…

Project 2 (AutoCAD) Submitted by Kanala Rahul Reddy Commands Used in this challenge Line Xline Polyline Rectangle Circle Arc Trim Move Offset Hatch Layer Match Prop Multileader Fillet Copy Explode Dimlinear Dimcontinue Dim break Dim update Hide pallets (POFF) Show pallets (PON) Extrude Boundary/BO Region Sweep Matbrowseopen…

Challenge 12 Submitted By Kanala Rahul Reddy Commands Used in this challenge Line Rectangle Trim Move Copy Explode Circle Dimlinear Dimcontinue Boundary 3Dorbit 3D rotate Extrude Region UCS Camera Block Render RR Sweep Create Light   Create a 3D Isometric View of the building with plan and elevation given.  …

Project 1 (AutoCAD) Submitted by Kanala Rahul Reddy Commands Used in this challenge Line Xline Polyline Rectangle Circle Arc Trim Move Offset Hatch Layer MatchProp Multileader Fillet Copy Explode Dimlinear Dimcontinue Dim break Dim update Hide pallets (POFF) Show pallets (PON) Q. Design and Draft a layout of a residential…

Challenges 11 Commands Used in this challenge Line Rectangle Trim Move Copy Explode Circle Dimlinear Dimcontinue 3DFACE 3Dorbit Extrude Region UCS 1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Aim: To draw the 3D wireframe model as shown in the figure Introduction:  The 3Dwireframe…

Challenges 10 Submitted By Kanala Rahul Reddy Commands Used in this challenge Line Rectangle Mview View PS or paper space MS or model space Move BATTMAN Text Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command…

Challenges Week-9 Submitted by Kanala Rahul Reddy Commands Used in this challenge Line Rectangle Offset Trim Explode Circle Dimlinear Dimcontinue Move ATTDEF BATTMAN Block Blockedit Hatch Hatchedit Regen 1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide…

Challenges Week 8 Submitted by KANALA RAHUL REDDY Commands Used in this challenge Line Rectangle Offset Trim Explode Circle Dimlinear Move ATTDEF BATTMAN Block Blockedit Table   Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size…

Week 7 Challenges Submitted By Kanala Rahul Reddy  Commands Used in this challenge Line Xline Rectangle Offset Trim Explode Arc Circle Dimlinear Dimcontinue Dimbreak Mleader Text Move Hatch  Editing Dimensions Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension…

Week 6 -Challenges Submitted By Kanala Rahul Reddy Commands Used in this challenge Line Xline Rectangle Offset Trim Explode Arc Circle Dimlinear Dimcontinue Text Move Hatch   Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with…

Sketch a G+1 floor residential plan, according to Vastu shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

PROJECT   1. Calculate the Concrete Mix Design for M35 grade concrete with fly ash Aim : To determine and calculate mix proportions of concrete mix design for M35 grade concrete with flyash Stipulations for Proportioning Grade of concrete = M35 Let us assume grade of cement is 43 grade OPC conforming to IS 8112 Type…

Challenges – Week 5 Submitted By Kanala Rahul Reddy Comands used in this Challenge are Line Rectangle Offset Point Move Circle Hatch Copy Array Divide Explode Leader Trim Text Textedit TXT2MTXT  Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert…

Week 4 Challenges Submitted by Kanala Rahul Reddy Challenge 1 Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also, the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of…

                                                       Challenge 3                                  …

Challenge 2 Submitted by Kanala Rahul Reddy Commands used in this challenge Line Polyline Rectangle Trim Chamfer Offset Isometric Views Copy   Question 1: Drawing C1 figure in AutoCAD Aim: To draw the figure C1 of a C.S. of load bearing wall over spread footing Introduction Wall footing is a type of footing which…